RGBlink MSP 214 Manual de usuario
MSP 214 User Manual 1
P
MSP 214
User Manual
Manual #: RGB-RD-UM-M214 E001
Revision: V1.2
MSP 214 User Manual 2
MSP 214·User Manual
Thank you for choosing our products!
In order to allow you to learn how to use the DVI Extender quickly, we
bring you the detailed user manual. You can read the introduction and
directions before using the DVI Extender, please read all the information
we provide carefully to use our products correctly.
Copyright
©2012 All rights are reserved by RGBlink.
This document is done independently by Xiamen RGBlink Science &
Technology Co.,LTD. No part can be copied, reproduced or translated
without permission.
Notice
RGBlink provides this manual ―as is‖ without warranty of any kind, no
matter expressed or implied, including but not limited to the implied
warranties or merchantability and fitness for a particular purpose. RGBlink
may make improvements or changes to the products and the programs
described in this publication at any time without notice.
This publication would contain technical inaccuracies or typographical
errors. Changes are periodically made to the information in this
publication; these changes are incorporated in new editions of this
publication.
Federal Communications Commission
(FCC) Statement
This equipment has been tested and found to comply with the limits for a
class A digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses and radiates radio
frequency energy and, if not installed or used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area may
cause harmful interference, in which case the user will be responsible for
MSP 214 User Manual 3
correcting any interference.
Guarantee and Compensation
RGBlink provides a guarantee related to perfect manufacturing as part
of the legally stipulated terms of guarantee. On receipt, the purchaser
must immediately inspect all delivered goods for damage incurred
during transportation, as well as for material and manufacturing faults.
Please complain to RGBlink by written notice.
The period of guarantee begins from the date of transfer of risks, in the
case of special systems and software on the date of commissioning, at
latest 30 days after the transfer of risks. In the event of justified notice of
compliant, RGBlink can repair the fault or provide a replacement at its own
discretion within an appropriate period. If this measure proves to be
impossible or unsuccessful, the purchaser can demand a reduction in the
purchase price or cancellation of the contract.All other claims, in particular
those relating to compensation for direct or indirect damage, and also
damage attributed to the operation of software as well as to other service
provided by RGBlink, being a component of the system or independent
service, will be deemed invalid provided the damage is not proven to be
attributed to the absence of properties guaranteed in writing or due to the
intent or gross negligence or part of RGBlink.
If the purchaser or a third party carries out modifications or repairs on
goods delivered by RGBlink, or if the goods are handled incorrectly, in
particular if the systems are commissioned operated incorrectly or if, after
the transfer of risks, the goods are subject to influences not agreed upon
in the contract, all guarantee claims of the purchaser will be rendered
invalid. Not included in the guarantee coverage are system failures which
are attributed to programs or special electronic circuitry provided by the
purchaser, e.g. interfaces. Normal wear as well as normal maintenance
are not subject to the guarantee provided by RGBlink either.
The environmental conditions as well as the servicing and maintenance
regulations specified in this manual must be complied with the customer.
Trademark
Brand and product names mentioned in this manual may be trademarks,
registered trademarks or copyrights of their respective holders. All brand
and product names mentioned in this manual serve as comments or
examples and are not to be understood as advertising for the products or
their manufactures.
MSP 214 User Manual 4
Company Address
Xiamen RGBlink Science & Technology Co., Ltd.
Headquarter: S603~604 Weiye Building Torch Hi-Tech
Industrial Development Zone Xiamen, Fujian Province,
P.R.C
Shenzhen office: Floor 11, A1 Building, Baiwang R&D Building,
Shahe West Road, Xili Town, Nanshan District, Shenzhen,
Guangdong Province, P.R.C
Beijing office: Room 602, Building 7, CaiManJie, No.67,
Chaoyang Road, Chaoyang District, Beijing, P.R.C
Shanghai office：Building 3, 1358 Nong, Tongpu Road,
Shanghai, P.R.C
Tel: +86-592-5771197
Fax: +86-592-5771202
Websites：
~http://www.rgblink.com
~http://www.rgblink.cn
E-mail：rgblinkcs@gmail.com
MSP 214 User Manual 5
Safe Operation Summary
The general safety information in this summary is for operating personnel.
Do Not Remove Covers or Panels
There are no user-serviceable parts within the unit. Removal of the top
panel will expose dangerous voltages. To avoid personal injury, do not
remove the top panel. Do not operate the unit without the panel installed.
Use the Proper Properly
This product is intended to operate from a power source that will not apply
more than 230 volts rms between the supply conductors or between both
supply conductor and ground. A protective ground connection by way of
grounding conductor in the power cord is essential for safe operation.
Ground the Product Properly
This product is grounded through the grounding conductor of the power
cord. To avoid electrical shock, plug the power cord into a properly wired
receptacle before connecting to the product input or output terminals. A
protective-ground connection by way of the grounding conductor in the
power cord is essential for safe operation.
Use the Proper Power Cord
Use only the power cord and connector specified for your product. Use only
a power cord that is in good condition. Refer cord and connector changes
to qualified service personnel.
Use the Proper Fuse
To avoid fire hazard, use only the fuse having identical type, voltage rating,
and current rating characteristics. Refer fuse replacement to qualified
service personnel.
Do Not Operate in Explosive Dangerous
Atmospheres
To avoid explosion, do not operate this product in an explosive
atmosphere.
MSP 214 User Manual 6
Terms and Equipment Mark in This Manual
WARNING
Highlight an operating procedure, practice, condition,
statement, etc, which, if not strictly observed, could result in
injury or death of personnel.
Note
CAUTION
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
Highlights an essential operating
procedure, condition or statement.
MSP 214 User Manual 7
Amendment Record
The table below lists the changes to the DVI Extender User Manual.
Format
Time
ECO#
Description
Principal
1.0
2010-11-15
0000
Release
LISA
1.1
2013-08-07
0001
Change the integral style of product
and user manual.
Vira
1.2
2014-01-20
0002
1. Update Shenzhen office address.
2. Update the fiber module
description.
Vira
MSP 214 User Manual 8
CONTENT
CONTENT.......................................................................................... 8
1. Brief Introduction....................................................................... 10
Chapter Structure.............................................................................11
Manual Usage...................................................................................12
Terms and Definitions......................................................................13
System Overview .............................................................................19
Application Questions......................................................................20
2. Hardware Orientation................................................................ 21
In This Chapter.................................................................................21
MSP 214 DVI to Fiber Panel...........................................................22
1: DVI Input............................................................................................... 22
2: Signal Indicator.................................................................................... 22
1: Power Interface.................................................................................... 22
3: Fiber Output.......................................................................................... 22
2.4: Indicator............................................................................................. 23
MSP 214 Fiber to DVI Panel...........................................................24
1: Power Interface.................................................................................... 24
3: Fiber Input............................................................................................. 24
2.4: Indicator............................................................................................. 24
1: DVI Output............................................................................................ 24
MSP 214 User Manual 9
2: Signal Indicator.................................................................................... 24
3. Operation Manual ...................................................................... 25
MSP 214 DVI to Fiber......................................................................25
MSP 214 Fiber to DVI......................................................................26
4. Common Questions and Solution........................................... 27
In This Chapter................................................................................. 27
Power indicator light is off or blinks................................................28
Signal indicator light is off or blinks................................................28
12V power interface poor contact...................................................28
A. Specification.............................................................................. 29
B. Contact Information.................................................................. 31
MSP 214 User Manual 10
1. Brief Introduction
This chapter is designed to introduce you to the MSP 214 User Manual. It
covers:
Chapter Structure
Manual Usage
Terms and Definitions
System Overview
Application Questions
Otros manuales para MSP 214
2
Tabla de contenidos
Otros manuales de Extensor de RGBlink
RGBlink
RGBlink MSP 214 Manual de usuario
RGBlink
RGBlink MSP 318 Manual de usuario
RGBlink
RGBlink MSP530 Manual de usuario
RGBlink
RGBlink ASK plus Manual de usuario
RGBlink
RGBlink ASK plus p2p Manual de usuario
RGBlink
RGBlink MSP 227 Manual de usuario
RGBlink
RGBlink MSP 214 Manual de usuario
RGBlink
RGBlink MSP 217 Series Manual de usuario
RGBlink
RGBlink MSP 318N Manual de usuario
RGBlink
RGBlink MSP 226 Manual de usuario
