RFIDeas AIR ID Manual de usuario
2020 rf IDEAS Inc rfIDEAS Configuration Utility User Manual P a g e
i
2020 rf IDEAS Inc rfIDEAS Configuration Utility User Manual P a g e
ii
2020 rf IDEAS Inc rfIDEAS Configuration Utility User Manual P a g e iii
Table of Contents
Glossary of Terms iv
Information Symbols iv
Reader Basics 5
1.1 Difference between Single
Configuration and Multi Configuration
Reader .................................................... 5
1.2 Reader Setup .................................. 5
Software 6
2.1 rf IDEAS Configuration Utility ...... 6
2.2 Utility Overview ............................. 7
2.3 Hamburger Menu ........................... 7
Auto Connect Menu 8
Device Menu 9
View Menu 10
Help Menu 10
2.4 Plus () Menu ................................. 11
2.5 Icon Toolbar .................................. 12
Connect 12
Disconnect 14
Write 15
2.6 WAVE ID Plus Configuration ....... 16
Device List 16
Configurations 16
2.7 Home Tab ....................................... 17
Connection Types 17
Output Test Area 18
Status Bar 19
2.8 Timing Tab .................................... 20
2.9 SDK Tab ......................................... 21
Disable Keystrokes for SDK 22
LED 22
Logical Unit ID 23
Beeper 23
Volume 23
Card ID 24
2.10 Format Tab .................................. 26
Data Format Tab 26
Delimiters Tab 28
Extended Tab 30
Hashing Tab 40
2.11 Tools Tab ...................................... 45
Cloning 45
Card Analyzer 51
Troubleshooting 71
3.1 Troubleshooting ............................ 71
Index 77
Appendix 78
Use the WAVEID Plus Reader for
Password Security - Complex
Passwords ........................................... 78
ASCII Extended Procedure ................ 79
2020 rf IDEAS Inc rfIDEAS Configuration Utility User Manual P a g e iv
Glossary of Terms
TERMS DEFINITIONS
ASCII The American Standard Code for Information Interchange codes
represent text in computers communications equipment and other
readers that use text
Contactless The high frequency 1356 MHz smart card technology
FAC Facility Access Code
OEM The card and badge reader without case Available in selfcontained
modules for easy system integration
WAVE ID The rf IDEAS brand name given to all 125 kHz proximity and 1356 MHz
contactless smart card readers
SDK Software Developers Kit Software Developers Kits from rf IDEAS
provide the high level command capabilities to integrate software
applications with our readers
CSN Also known as the Card Serial Number is part of the ISO 15693 standard
for vicinity cards operating at the 1356 MHz frequency
UID The User ID User Identification or Unique ID is a number based on all
bits of the card data
Information Symbols
SYMBOL MEANING DEFINITION
Note Notes are useful information related to the text
Tip Tips can provide hints and pointers in addition to the text
Important Important information can include prerequisites limitations
and caution
2020 rf IDEAS Inc rfIDEAS Configuration Utility User Manual P a g e 5
Chapter
Reader Basics
11 Difference between Single Configuration and
Multi Configuration Reader
The WAVE ID Plus is a dual frequency programmable reader that combines 125 kHz and 1356
MHz technologies into the same reader Its the only reader in the industry that reads multiple
cards of your choice among many different card types delivering flexibility to any customer
struggling with different card technologies In contrast to the WAVE ID Plus reader our
standard WAVE ID Solo proximity and contactless readers function on a single frequency and
single card type which is either 125 kHz proximity or 1356 MHz contactless
12 Reader Setup
To setup the reader:
1 Connect the reader to the workstation using RS232 USB or Ethernet Must be in the
same Subnet as the workstation
2 The workstation should detect new hardware for USB connections Verify the
workstation recognizes this connection using Device Manager
2020 rf IDEAS Inc rfIDEAS Configuration Utility User Manual P a g e 6
Chapter
Software
21 rf IDEAS Configuration Utility
The rf IDEAS Configuration Utility provides users with the ability to configure their WAVE ID
Solo and WAVE ID Plus readers
The Utility allows WAVE ID Plus to be configured for 2 or 4 depending on model card types
rf IDEAS WAVE ID Plus readers with extended functionality can operate in one of two modes
Data Format mode ID processing or the Extended mode ID processing for output
generation The default mode of processing is Data Format mode
The utility can be downloaded from the website and while opening the application after
installation for the first time user will need to accept the End User License Agreement
EULA as shown in image below:
Image 1: End User License Agreement (EULA)
2020 rf IDEAS Inc rfIDEAS Configuration Utility User Manual P a g e 7
22 Utility Overview
Image 2: Utility Overview
23 Hamburger Menu
Image 3: Hamburger Menu
The Hamburger Menu contains all the basic configuration options for the utility
2020 rf IDEAS Inc rfIDEAS Configuration Utility User Manual P a g e 8
Auto Connect Menu
Image 4: Auto Connect Menu
The Auto Connect menu provides options for reader to utility connections
USB: The utility searches for all USB connected readers at startup
Serial: The utility searches for all serial connected readers at startup
Ethernet: The utility searches for the Ethernet connected reader to the IP Address and Port
provided by user
2020 rf IDEAS Inc rfIDEAS Configuration Utility User Manual P a g e 9
Device Menu
Image 5: Device Menu
The Device menu lists the options for resetting writing to and reading the selected reader
configurations
Reset to factory defaults: Resets all configuration parameters to defaults
Reset to Stored Settings: This selection allows users to reset the reader to their own
personally defined stored settings
Write Stored Settings: Writes the current configuration settings to stored settings
The last two options from Device menu will not be available for single configuration readers
2020 rf IDEAS Inc rfIDEAS Configuration Utility User Manual P a g e 10
View Menu
Image 6: View Menu
The view menu provides options for altering the appearance of certain functions of the
utility All the options in this menu are set to appear by default
Show Tooltip Balloon help: Menu option for displaying or not displaying the tooltip popup
balloon The application default is set to Show tooltips
Help Menu
Image 7: Help Menu
Otros manuales para AIR ID
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Lector de tarjetas de RFIDeas
