RF SOLUTIONS SCORPION Series Manual de usuario

SCORPION

DS-SCORPION-1

Description

A rugged Remote Transmitter which can be used with one of the RF Solutions receiv-

ers to generate a long Range Remote Control System. The Transmitter may be user

configured to operate in several Modes of operation, providing shorter or longer range

and with optional Acknowledge indication back from the receiver.

Supplied ready to go the SCORPION Transmitter is a sealed waterproof enclosure with

fixed internal Lithium Battery, which is recharged using standard QI wireless charger

base.

• Rugged RF Transmitter Handset

• Supplied “Ready to Go”

• 1 - 16 Switches

• 868 / 918MHz Versions

• FM / LoRa Technology

• Range:

• LORA Mode 7 upto 20Km

• FM Operation upto 2Km

• Waterproof IP66

• Compatible with RF Solutions

Receivers

• Internal Lithium Battery 1AH

• Wireless Rechargeable

• Displays Acknowledge from Receiver

• Watchdog Transmit Feature

• Continuous or State Change Transmit

• CE Compliant

• FCC & Australian Certification Pending

Applications

• Industrial , conveyors,

machinery, pumps etc

• General Purpose Remote

Switching

• M2M Control Switching

FM/LoRa Hand Held Transmitter

SCORPION LoRa Transmitter

DS-SCORPION-1 Page 2

Part Numbers

Transmitter 868MHz (Europe) 915MHz (USA, Aus, UK)

1 Switch SCORPION-8TW1 SCORPION-9TW1

4 Switch SCORPION-8TW4 SCORPION-9TW4

8/16 Switch SCORPION-8TW16 SCORPION-9TW16

Mechanical Dimensions

(All dimensions in mm)

SCORPION LoRa Transmitter

DS-SCORPION-1 Page 3

Compatible Receivers

Scorpion Transmitters are

SLIMDIN Receiver

Compact DIN Rail Receiver

4 Channels Relay outputs

12-30Vdc supply

725 DIN Rail Module

DIN Rail Receiver

2 Channels Relay changeover contact outputs

expandable to 250 using add-on Relay modules

12-30Vdc supply

PRO Series Receiver Units

IP65 Receiver with DIN Rail Modules

4, 8, 16 Channels Changeover Contacts

expandable to 250 using add-on Relay modules

110-230Vac or 12-30Vdc supply

Optional Accessory - Wireless Charging Cradle WCHARGECRADLE

A folding Desktop Wireless charger that can be used flat or cradle supplied with USB Cable

SCORPION LoRa Transmitter

DS-SCORPION-1 Page 4

Operation

Press any of the switches to operate. The Transmitter will auto sleep between operations to

save power

The LED’s indicate the following:

RF Transmit

The GREEN LED operates when transmitting an RF

signal

RF Acknowledge (if configured) :

After RF Transmission the GREEN LED will Flash at

high speed to indicate that an acknowledgment has

successfully been received back form the receiver

The RED LED will Flash at high speed to indicate

that an acknowledgment has not been received back

form the receiver

Low Battery: If battery requires recharging Low Battery LED illuminates for 3 seconds after

each operation

Recharging the Battery

The battery can be recharged by using any QI standard wireless charger. (e.g. Apple or Samsung stand-

ard Wireless charging pads)

When Charging the LOW Battery RED LED Flashes indicates

charging is in progress.

When fully charged the GREEN LED is illuminated

Low

Battery RF Acknowledge

From Receiver

(Green / Red LED)

RF Transmit

(Green LED)

LED

Flashes

while

recharging

Fully

Charged

(Green LED)

SCORPION LoRa Transmitter

DS-SCORPION-1 Page 5

Configuring Modes of Operation

To configure the modes of operation, undo the

six enclosure fixing screws to access the inter-

nal circuit board.

The SET switch is used to configure the operat-

ing modes

Note: please also see the Video on our website!

SET

Switch

Antenna

LED1 LED2

LED3

Flashes

constantly

in setup

Restore SCORPION to Factory Default Setings

Briefly Press

SET Sw

LED1 ON

Constantly

Press & Hold

SET Sw

For 10 Secs

The Following Modes can be configured using the SET Switch

1. RF Mode of Transmission (FM or LORA Mode)

2. Acknowledgement back from the Receiver

3. Automatic Watchdog Transmissions

4. Continuous or State Change Transmission

SCORPION Transmitters are factory Shipped with the following Settings

RF Transmission FM

Acknowledgment OFF

Watchdog OFF

Transmission Type Continuous

SCORPION LoRa Transmitter

DS-SCORPION-1 Page 6

Mode

(No of LED1 Flashes)

Propagation Time

from TX to output

Activated (approx)

Operations from a

Single battery charge

RF Transmission

1 20 mS 1MillionFM

2 20 mS ~550KLoRa Mode 1

3 40 mS 288KLoRa Mode 2

4 80 mS 144KLoRa Mode 3

5 160 mS 72KLoRa Mode 4

6 320 mS 36KLoRa Mode 5

LoRa Mode 6 7 640 mS 18K

LoRa Mode 7 8 1.28 Secs ~9,000

Press SET Sw

LED1

flashes 1x

LED 1 & 2

Flashes 1x

LED 1 Flashes

Indicating

Current MODE

Repeat Press SET Sw

To select Mode

1x = FM

2x = LORA Mode 1

3x = LORA Mode 2

4x = LORA Mode 3

5x = LORA Mode 4

6x = LORA Mode 5

7x = LORA Mode 6

8x = LORA Mode 7

After selecting wait for timeout

Wait 3 Seconds

To Set the RF Transmission MODE

Notes

1. Range is dependant on many factors in-

cluding the mode of transmission. Range

can be reduced by 75% in built up areas

with poor antenna, and environmental

conditions

2. Battery life quoted is approximate based

on 30 operations per day.

This sets the type of RF Transmission.

Possible options are FM, or LORA Modes 0 - 7

FM or LORA mode 0 provides the quickest re-

sponse; from Transmitter sw pressed to Re-

ceiver Relay output.

LORA mode 7 provides the longest operating

range but with the longest time delay of from

button press to receiver relay actuation..

SCORPION LoRa Transmitter

DS-SCORPION-1 Page 7

RF Acknowledgment from Receiver - Warning!

When Acknowledgement is ON, SCORPION re-

quests an RF signal back from the receiver. Whilst

in theory if an RF signal can be transmitted one

way then it can be returned, in practice occasional-

ly the received acknowledgement many not pene-

trate as well as the SCORPION transmitted signal.

Press SET Sw

LED1

flashes 2x

LED 1 & 2

Flashes 1x

LED1 is either

ON or OFF

indicating

current Status

Press SET Sw To select

LED1 ON:

Acknowledgement

LED1 OFF: NO

Acknowledgement

After selecting wait for

timeout

Wait 3 Seconds

To Set Acknowledgement Request

Acknowledgement Feature provides the user with

LED indication that the receiver has successfully re-

ceived the transmitters signal.

When activated the SCORPION Transmitter includes

an acknowledgement request from the receiver with-

in each radio transmission.

The response from the receiver is indicated on the

transmitter via the RED / GREEN LEDs.

The Transmitter it will continue to transmit until a

successful ack is receiver

SCORPION LoRa Transmitter

DS-SCORPION-1 Page 8

If enabled, SCORPION automatically transmits a

background “watchdog” RF Signal approx. every

~45 secs,

RF Solutions Receivers with a Watchdog feature wil

hold a Relay contact “ENERGISED” as long as

Watchdog is regularly received confirming the

transmitter is in range and the system is operating

correctly.

When using Watchdog it may be useful to incorpo-

rate a Power Switch to avoid premature battery

discharge

A power switch can be incorporated If this is re-

quired please contact our sales Dept.

Press SET Sw

LED1

flashes 3x

LED 1 & 2

Flashes 1x

LED1 is either

ON or OFF

indicating

current Status

Press SET Sw To select

LED1 ON: Watchdog ON

LED1 OFF: Watchdog OFF

After selecting wait for timeout

Wait 3 Seconds

To Set Watchdog Transmissions

SCORPION LoRa Transmitter

DS-SCORPION-1 Page 9

When a switch button is operated SCORPION will

transmit a “Button Down” RF Transmission

When a switch button is released SCORPION will

transmit a “Button Up” RF Transmission

Continuous Transmit

SCORPION repeat transmits “button Down” in short

bursts for as long as switch button is pressed.

If the Acknowledgment is ON the receiver will reply

after each RF transmission burst.

This is ideally suited to momentary operation where

the receiver output needs to be active as long as the

user presses down a SCORPION Button .

State Change Transmit

SCORPION transmits an RF transmission only when

the switch button is pressed or released (i.e a state

change).

On each of these “state changes” SCORPION trans-

mits upto 4 transmissions, or, “RF packets” (which

can be seen by the GREEN LED flashing upto 4 times,

If the Acknowledgment is ON the receiver will reply

immediately.

After receiving an Acknowledgment the SCORPION will

cease sending any remaining of the 4 transmissions.

Press SET Sw

LED1

flashes 4x

LED 1 & 2

Flashes 1x

LED1 is either

ON or OFF

indicating

current Status

Repeat Press SET Sw To

select

LED1 OFF: State

LED1 ON: Continuous

After selecting wait for timeout

Wait 3 Seconds

To Set Continuous or State Change RF Transmissions

SCORPION LoRa Transmitter

DS-SCORPION-1 Page 10

LED Status

Continuous Transmission

Acknowledgement OFF

Operation GREEN LED RED LED

Button is briefly pressed Flashes briefly No-operation

Button is held Down Flashes continually No-operation

Button is released Flashes briefly No-operation

RF Transmitting &

Acknowledgment OK

Acknowedgment

Failed

Continuous Transmission

Acknowledgement ON

Operation GREEN LED RED LED

Button is briefly pressed Flashes briefly (TX then RX ack) Flashes if no Ack received

Button is held Down Flashes continually (TX then RX ack) Flashes if no Ack received

Button is released Flashes briefly (TX then RX ack) Flashes if no Ack received

State Change Transmission

Acknowledgement OFF

Operation GREEN LED RED LED

Button is briefly pressed Flashes 1X (TX) No-operation

Button is held Down No-operation No-operation

Button is released Flashes 1X (TX) No-operation

State Change Transmission

Acknowledgement ON

Operation GREEN LED RED LED

Button is briefly pressed

& Receiver, ack OK Flashes (TX then RX ack) No-operation

Button is briefly pressed

& Receiver, NOK Flashes continually (awaiting Ack) Flashes to show no Ack

received

Button is held Down Flashes continually (awaiting Ack) Flashes to show no Ack

Button is released Flashes 2 - 5X (TX and RX ack) Flashes if no Ack received

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Transmisor de RF SOLUTIONS

RF SOLUTIONS

RF SOLUTIONS PRO Series Manual de usuario

RF SOLUTIONS

RF SOLUTIONS TRAP Manual de usuario

RF SOLUTIONS

RF SOLUTIONS Scorpion Manual de usuario

RF SOLUTIONS

RF SOLUTIONS QUANTA QUANTA-4T1 Manual de usuario

RF SOLUTIONS

RF SOLUTIONS BOGEYBOX Manual de usuario

RF SOLUTIONS

RF SOLUTIONS 202 Industrial Series Manual de usuario

RF SOLUTIONS

RF SOLUTIONS TAURUS Series Manual de usuario

RF SOLUTIONS

RF SOLUTIONS CARLTON-8T16 Manual de usuario

RF SOLUTIONS

RF SOLUTIONS TAURUS Manual de usuario

Manuales populares de Transmisor de otras marcas

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manual del propietario

Honeywell

Honeywell 5816WMBR Manual de usuario

Kamstrup

Kamstrup READy MTU Instrucciones de funcionamiento

Omega

Omega ZW Series Manual de usuario

ABB

ABB Field 264H Guía

Alinco

Alinco DJ-V17T Manual de usuario

Dejero

Dejero EnGo 3x Manual de usuario

Rosemount

Rosemount 4600 Manual de usuario

Speaka Professional

Speaka Professional 2342740 Manual de usuario

trubomat

trubomat GAB 1000 Manual de usuario

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manual de usuario

Rondish

Rondish UT-11 Manual de usuario

MG 10JRE Manual de usuario

Burkert

Burkert 8177 Manual de usuario

Firetide

Firetide HotPort 3203 Manual

Tele Radio

Tele Radio T9-02 Manual de usuario

Rotronic

Rotronic HygroFlex HF3 Series Manual de usuario

Jamara

Jamara FCX6 Pro Tel Manual de usuario