M240 Reader User Guide P/N 02270 REV00 4
Regulatory Compliance
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the
interference at his own expense.
RF Code is not responsible for any radio or television interference caused by using other than recommended cables and
connectors or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void
the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this de- vice may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
RF Code, Inc.
9229 Waterford Centre Blvd. Suite 500
Austin, TX 78758 www.rfcode.com
Industry Canada Compliance Statement
This Class A digital apparatus meets the requirements of the Canadian Interference-Causing Equipment Regulations.
Avis de conformité à la réglementation d’Industrie Canada. Cet appareil numérique de la classe A respecte toutes les
exigences du Règlement sur le matériel brouilleur du Canada.
The system is designed to operate with RF Code RFID Tags –whose operating frequency is 433.92 MHz which have
been certified or are in the certification process. These devices comply with part 15 of the FCC rules. Operation is
subject to the following two conditions:
(1) these devices may not cause harmful interference, and
(2) these devices must accept any interference received, including interference that may cause undesired
operation.
a. FCC ID: P6F2005433 for beacon intervals greater than, or equal to 10 seconds.
b. FCC ID: P6F433MHZ for the security tag with beacon intervals less than 10 seconds.
CE Compliance
This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be
required to take adequate measures. This equipment complies with the requirements relating to electro- magnetic
compatibility, EN 55022 class A, the essential protection requirement of Council Directive 89/336/EEC on the approximation of
the laws of the Member States relating to electromagnetic compatibility.
WEEE Compliance
Do Not Dispose Product with Municipal Waste. Special Collection/Disposal Required.
