Renesas SDAH02 Manual de usuario

User Manual for the SDAH02 Evaluation Kit for

the HS3001 Humidity and Temperature Sensor

November 17, 2017

Description

The SDAH02 Evaluation Kit is used to assess the HS3001 High-

Performance Relative Humidity and Temperature Sensor in a

typical application. The battery-operated portable sensing system

enables users to easily monitor the ambient relative humidity and

temperature via the LCD display. A single button can be used to

select different modes and plot data. The plots show relative

humidity or temperature readings versus time.

Kit Contents

SDAH02 Evaluation Board

CR1632 3V Battery

Quick Start Guide

Features

SDAH02 Evaluation Board with LCD display

HS3001 Relative Humidity and Temperature Sensor mounted

on the Evaluation Board:

•RH accuracy: ±1.5%RH

•Operating temperature: -40 to 105°C

LCD display modes:

•Relative humidity and temperature reading

•Relative humidity versus time

•Temperature reading versus time

SDAH02 Evaluation Kit

User Manual for the SDAH02 Evaluation Kit for the HS3001 Humidity and Temperature Sensor

November 17, 2017

Important Notes

Disclaimer

Integrated Device Technology, Inc. and its affiliated companies (herein referred to as “IDT”) shall not be liable for any damages arising out of defects resulting from

(i) delivered hardware or software

(ii) non-observance of instructions contained in this manual and in any other documentation provided to user, or

(iii) misuse, abuse, use under abnormal conditions, or alteration by anyone other than IDT.

TO THE EXTENT PERMITTED BY LAW, IDT HEREBY EXPRESSLY DISCLAIMS AND USER EXPRESSLY WAIVES ANY AND ALL WARRANTIES, WHETHER

EXPRESS, IMPLIED, OR STATUTORY, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A

PARTICULAR PURPOSE, STATUTORY WARRANTY OF NON-INFRINGEMENT, AND ANY OTHER WARRANTY THAT MAY ARISE BY REASON OF USAGE

OF TRADE, CUSTOM, OR COURSE OF DEALING.

Restrictions in Use

IDT’s SDAH02 Evaluation Kit, consisting of the SDAH02 Evaluation Board, battery, and documentation, is only designed to provide a quick setup for taking RH%

and temperature measurements with the HS3001. IDT’s SDAH02 Evaluation Kit must not be used for any mission-critical applications or measurement reference

source.

Contents

1. Setup ............................................................................................................................................................................................................3

1.1 Kit Hardware Setup............................................................................................................................................................................3

1.1.1 Installing the Battery............................................................................................................................................................3

2. Usage Guide.................................................................................................................................................................................................3

2.1 Measurement Settings .......................................................................................................................................................................3

3. Ordering Information.....................................................................................................................................................................................4

4. Revision History............................................................................................................................................................................................4

List of Figures

Figure 1. Battery Holder on the Backside of the SDAH02 Evaluation Board......................................................................................................3

Figure 2. SDAH02 Portable Sensing System –Relative Humidity and Temperature Readings Mode...............................................................3

Figure 3. SDAH02 Portable Sensing System –Plotting Modes..........................................................................................................................4

User Manual for the SDAH02 Evaluation Kit for the HS3001 Humidity and Temperature Sensor

November 17, 2017

1. Setup

1.1 Kit Hardware Setup

1.1.1 Installing the Battery

A CR1632 battery is included with the kit. Insert the battery in the battery holder on the back of the board with the positive battery terminal facing

away from the board

Figure 1. Battery Holder on the Backside of the SDAH02 Evaluation Board

2. Usage Guide

After the kit is turned on in the following steps, three different modes can be selected and displayed on the LCD: relative humidity and

temperature readings; relative humidity versus time; and temperature reading versus time.

2.1 Measurement Settings

The following steps describe basic kit operation (see Figure 2):

1. Turn on the system by sliding the power switch to the “ON” position. Once the system is activated, the ambient relative humidity and

temperature reading will be displayed.

2. Press the “Function”button to cycle through the different modes for the display (see Figure 2 and Figure 3).

Figure 2. SDAH02 Portable Sensing System –Relative Humidity and Temperature Readings Mode

LCD Display

HS3001 Sensor

Power Switch

Function Button

User Manual for the SDAH02 Evaluation Kit for the HS3001 Humidity and Temperature Sensor

November 17, 2017

Figure 3. SDAH02 Portable Sensing System –Plotting Modes

Relative Humidity Plotting Mode Temperature Plotting Mode

3. Ordering Information

Orderable Part Number

Description

SDAH02

SDAH02 Evaluation Kit, including SDAH02 Evaluation Board with LCD, CR1632 battery, Quick Start Guide

4. Revision History

Revision Date

Description of Change

November 17, 2017

Initial release.

Corporate Headquarters

6024 Silver Creek Valley Road

San Jose, CA 95138

www.IDT.com

Sales

1-800-345-7015 or 408-284-8200

Fax: 408-284-2775

www.IDT.com/go/sales

Tech Support

www.IDT.com/go/support

DISCLAIMER Integrated Device Technology, Inc. (IDT) and its affiliated companies (herein referred to as “IDT”) reserve the ri ght to modify the products and/or specifications described herein at any time,

without notice, at IDT's sole discretion. Performance specifications and operating parameters of the described products are determined in an independent state and are not guaranteed to perform the same

way when installed in customer products. The information contained herein is provided without re presentation or warranty of any kind, whether express or implied, including, but not limited to, the suitability

of IDT's products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not

convey any license under intellectual property rights of IDT or any third parties.

IDT's products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be

reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such a manner does so at their own risk, absent an express, written agreement by IDT.

Integrated Device Technology, IDT and the IDT logo are trademarks or registered trademarks of IDT and its subsidiaries in the United States and other countries. Other trademarks used herein are the

property of IDT or their respective third party owners. For datasheet type definitions and a glossary of common terms, visit www.idt.com/go/glossary. All contents of this document are copyright of Integrated

Corporate Headquarters

TOYOSU FORESIA, 3-2-24 Toyosu,

Koto-ku, Tokyo 135-0061, Japan

www.renesas.com

Contact Information

For further information on a product, technology, the most

up-to-date version of a document, or your nearest sales

office, please visit:

www.renesas.com/contact/

Trademarks

Renesas and the Renesas logo are trademarks of Renesas

Electronics Corporation. All trademarks and registered

trademarks are the property of their respective owners.

IMPORTANT NOTICE AND DISCLAIMER

RENESAS ELECTRONICS CORPORATION AND ITS SUBSIDIARIES (“RENESAS”) PROVIDES TECHNICAL

SPECIFICATIONS AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING

REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND

OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS.

These resources are intended for developers skilled in the art designing with Renesas products. You are solely responsible

for (1) selecting the appropriate products for your application, (2) designing, validating, and testing your application, and (3)

ensuring your application meets applicable standards, and any other safety, security, or other requirements. These

resources are subject to change without notice. Renesas grants you permission to use these resources only for

development of an application that uses Renesas products. Other reproduction or use of these resources is strictly

prohibited. No license is granted to any other Renesas intellectual property or to any third party intellectual property.

Renesas disclaims responsibility for, and you will fully indemnify Renesas and its representatives against, any claims,

damages, costs, losses, or liabilities arising out of your use of these resources. Renesas' products are provided only subject

to Renesas' Terms and Conditions of Sale or other applicable terms agreed to in writing. No use of any Renesas resources

expands or otherwise alters any applicable warranties or warranty disclaimers for these products.

(Rev.1.0 Mar 2020)

Tabla de contenidos

Otros manuales de Placa madre de Renesas

Renesas

Renesas ZMOD4410 Manual de usuario

Renesas

Renesas RA2L1 Manual de usuario

Renesas

Renesas RL78/G10 Manual de usuario

Renesas

Renesas ISL9241EVAL1Z Manual de usuario

Renesas

Renesas R0K572167 Manual de usuario

Renesas

Renesas ISL68137-61P-EV1Z Manual de usuario

Renesas

Renesas ISL91127IRN-EVZ Manual de usuario

Renesas

Renesas OB1203SD-BT-EVK Manual de usuario

Renesas

Renesas ZL9024MEVAL1Z Manual de usuario

Renesas

Renesas RTKA214401DR0000BU Manual de usuario

Renesas

Renesas intersil ISL73007SEH Manual de usuario

Renesas

Renesas SDAH01 Manual de usuario

Renesas

Renesas ISL8106EVAL1Z Manual de usuario

Renesas

Renesas ZSSC3240KIT Manual de usuario

Renesas

Renesas RTK7FPA2E1S00001BE Manual de usuario

Renesas

Renesas ISL8277M Manual de usuario

Renesas

Renesas RTD120D-EVK Manual de usuario

Renesas

Renesas MS7724 Manual de usuario

Renesas

Renesas RH850/F1x Manual de usuario

Renesas

Renesas ISL81801EVAL1Z Manual de usuario

Renesas

Renesas EK-RA6M1 Manual de usuario

Renesas

Renesas DA9066 Manual de usuario

Renesas

Renesas R9A06G062GNP Manual de usuario

Renesas

Renesas FPB-RA2E2 v1 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario