Renesas FP-80B Manual de usuario

H8/3637 Series

FP-80B

User System Interface Cable

(HS3637ECF61H)

for E6000 Emulator

User’s Manual

ADE-xxx-xxx

Rev. 4.0

4/1/03

Renesas Technology Corp.

HS3637ECF61HE

Cautions

1. Renesas neither warrants nor grants licenses of any rights of Renesas’s or any third party’s

patent, copyright, trademark, or other intellectual property rights for information contained in

this document. Renesas bears no responsibility for problems that may arise with third party’s

rights, including intellectual propertyrights, in connection with use of the information contained

in this document.

2. Products and product specifications may be subject to change without notice. Confirm that you

have received the latest product standards or specifications before final design, purchase or use.

3. Renesas makes every attempt to ensure that its products are of high quality and reliability.

However, contact Renesas’s sales office before using the product in an application that demands

especially high quality and reliability or where its failure or malfunction may directly threaten

human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power,

combustion control, transportation, traffic, safety equipment or medical equipment for life

support.

4. Design your application so that the product is used within the ranges guaranteed by Renesas

particularly for maximum rating, operating supply voltage range, heat radiation characteristics,

installation conditions and other characteristics. Renesas bears no responsibility for failure or

damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider

normally foreseeable failure rates or failure modes in semiconductor devices and employ

systemic measures such as fail-safes, so that the equipment incorporating Renesas product does

not cause bodily injury, fire or other consequential damage due to operation of the Renesas

product.

5. This product is not designed to be radiation resistant.

6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document

without written approval from Renesas.

7. Contact Renesas’s sales office for any questions regarding this document or Renesas

semiconductor products.

Preface

Thank you for purchasing this user system interface cable (HS3637ECF61H) for the Renesas’s

original microcomputer H8/3637 series.

The HS3637ECF61H is a user system interface cable that connects an H8/3637series E6000

emulator (HS3L08EPI60H; hereinafter referred to as the emulator) to the IC socket for a FP-80B

package for the H8/3637 series MCU on the user system.

Contents

Section 1 Configuration....................................................................................1

Section 2 Connection Procedures......................................................................4

2.1 Connecting User System Interface Cable to Emulator Station .........................................4

2.2 Connecting User System Interface Cable to User System................................................6

2.2.1 Installing IC Socket .............................................................................................6

2.2.2 Soldering IC Socket.............................................................................................6

2.2.3 Inserting Cable Head ...........................................................................................7

2.2.4 Fastening Cable Head..........................................................................................7

2.2.5 Fastening Cable Body..........................................................................................9

2.3 Recommended Dimensions for User System Mount Pad.................................................10

2.4 Dimensions for User System Interface Cable Head..........................................................11

2.5 Resulting Dimensions after Connecting User System Interface Cable.............................12

Section 3 Installing the MCU to the User System.............................................13

Section 4 Verifying Operation...........................................................................15

Section 5 Notice ................................................................................................17

Section 1 Configuration

CAUTION

Use an IC149-080-012-B5 socket (manufactured by

YAMAICHI ELECTRONICS Co., Ltd.) for the FP-80B

package IC socket on the user system.

Figure 1 shows the configuration of the HS3637ECF61H user system interface cable for the

FP-80B package.

User system

IC socket

Cable head

Screws (M2 x 12 mm)

with flat washers

(for fastening cable head)

Screws (M2 x 8 mm)

with flat washers

Socket cover

To emulator station

Cable body

Figure 1 HS3637ECF61H User System Interface Cable

Table 1 lists the HS3637ECF61H components. Please make sure you have all of these components

when unpacking.

Table 1 HS3637ECF61H Components

No. Component Quantity Remarks

1 Cable body 1 Flat cable

2 Cable head 1

3 IC socket 1 For the FP-80B package

4 Socket cover 1 For installing an FP-80B-packaged MCU

5 Screws (M2 x 12 mm) 4 For fastening cable head (with four flat washers)

6 Screws (M2 x 8 mm) 4 For installing an FP-80B-packaged MCU (with four

flat washers)

7 Documentation 1 User’s manual for HS3637ECF61H (this manual)

Section 2 Connection Procedures

2.1 Connecting User System Interface Cable to Emulator Station

WARNING

Observe the precautions listed below. Failure to do so

will result in a FIRE HAZARD and will damage the user

system and the emulator product or will result in

PERSONAL INJURY. The USER PROGRAM will be

LOST.

1. Always switch OFF the user system and the emulator

product before the USER SYSTEM INTERFACE CABLE

is connected to or removed from any part. Before

connecting, make sure that pin 1 on both sides are

correctly aligned.

2. The user system interface cable dedicated to the

emulator must be used.

To connect the cable body to the emulator station, follow the instructions below.

1. Make sure the user system and emulator station are turned off.

CAUTION

When connecting or removing the user system interface

cable, apply force only in the direction suitable for

connection or removal, while making sure not to bend or

twist the cable or connectors. Otherwise, the connectors will

be damaged.

2. After making sure the direction of the cable body connector is correct, firmly insert the cable

body connector into the emulator station socket (figure 2).

Figure 2 Connecting User System Interface Cable to Emulator Station

2.2 Connecting User System Interface Cable to User System

WARNING

Always switch OFF the user system and the emulator

product before the USER SYSTEM INTERFACE CABLE

is connected to or removed from any part. Before

connecting, make sure that pin 1 on both sides are correctly

aligned. Failure to do so will result in a FIRE HAZARD and

will damage the user system and the emulator product or

will result in PERSONAL INJURY. The USER PROGRAM will

be LOST.

To connect the cable head to the user system, follow the instructions below.

2.2.1 Installing IC Socket

After checking the location of pin 1 on the IC socket, apply epoxy resin adhesive to the bottom of

the IC socket for an FP-80B package, and fasten it to the user system before soldering.

2.2.2 Soldering IC Socket

After fastening, solder the IC socket for an FP-80B package to the user system. Be sure to

completely solder the leads so that the solder slops gently over the leads and forms solder fillets.

(Use slightly more solder than the MCU.)

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de computadora de Renesas

Renesas

Renesas H8 Series Manual de usuario

Renesas

Renesas SuperH E10A Manual de usuario

Renesas

Renesas M-Station Manual de usuario

Renesas

Renesas R8C/2F Manual de usuario

Renesas

Renesas SH7727 Guía de configuración

Renesas

Renesas R0E33062PMSRC0 Manual de usuario

Renesas

Renesas R-IN32M4-CL2 TESSERA Manual de usuario

Renesas

Renesas SuperH SH-4A Manual de usuario

Renesas

Renesas M3T-FLX-80NRA Manual de usuario

Renesas

Renesas RH850 Series Instrucciones de instalación y funcionamiento

Renesas

Renesas ReMarkey R5H30101 Manual de usuario

Renesas

Renesas F-ZTAT H8 Series Manual de usuario

Renesas

Renesas Converter Board R0E5212L4CFG00 Manual de usuario

Renesas

Renesas R0E001000PKZ00 Manual de usuario

Renesas

Renesas HSG2005 Manual de usuario

Renesas

Renesas R0E0100TNPFK00 Manual de usuario

Renesas

Renesas H8S/2646 Series Manual de usuario

Renesas

Renesas RZ/N1D Series Manual de usuario

Renesas

Renesas PRQP0100JE-B Manual de usuario

Renesas

Renesas SH7709S Manual de usuario

Renesas

Renesas M16C FAMILY Manual de usuario

Renesas

Renesas RH850/F1KM-S4 233pin Manual de usuario

Renesas

Renesas R0E53036ACFK40 Manual de usuario

Renesas

Renesas RL78G14 Manual de usuario

Manuales populares de Hardware de computadora de otras marcas

EMC2

EMC2 VNX Series Manual del propietario

Panasonic

Panasonic DV0PM20105 Manual de usuario

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manual de usuario

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manual de usuario

Raidon

Raidon iT2300 Manual de usuario

National Instruments

National Instruments PXI-8186 Manual de usuario

Hauppauge

Hauppauge WinTV-HVR-2250 Manual de usuario

Kontron

Kontron CP6002 Manual de usuario

Manhattan

Manhattan 702843 Manual de usuario

Aphex

Aphex 230 Manual de usuario

AMD

AMD Phenom II Manual operacional

Intel

Intel NUC 12 Pro Manual de usuario

dbx

dbx Zone Pro 1260 Manual de usuario

Galaxy

Galaxy GHDX2-2430S-24F4D Manual de usuario

Intel

Intel AXXRMFBU4 Manual de usuario

Kontron

Kontron DIMM-PC/MD Manual de usuario

ST X-NUCLEO-SAFEA1B Instrucciones de funcionamiento

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manual de usuario