Renau SKT T-2268 Manual de usuario
INSTRUCTION MANUAL
2022
6.8” SMART KITCHEN TIMER
T-2268
SKT
SMART KITCHEN TIMER
We Do More Than Design, We Invent
2
The Kitchen
Timer of the
Future Has
Arrived
SKT
3
Smart Kitchen Timer (SKT) Instruction Manual
About the SKT
Safety and General Information
Accessing the Conguration Tool
Creating a Food Group
Creating an Item
Pairing SKTs
Creating a Transferable Item
Creating Job Aids
Sending Conguration to the SKT
Glossary
Accessing and Navigating the SKT Menu
Uploading/Downloading Conguration Files
Adding a Gateway and Wireless Sensor Modules
Operating the SKT
4
5
6-7
8
9
10-11
12
13
14
15
16-17
18
19-20
21
4
The Smart KitchenTimerfeatures a durable 1280×480 displayalong with an incredibly
fast quad-core ARM Cortex A-7 microprocessor. As a result, the SKT oers superior
display capabilities when compared to our competitors. Congurable in either
horizontal or vertical orientation, the SKT is an extremely versatile food service timer
which can be mounted and used in many dierent areas of the kitchen. These areas
include the grill, retherm station, fryer, hot/cold holding bins and prep table. What’s
more, the SKT can even be used for front of house tasks! Mounting the unit is simple
with the included bracket. The Smart Kitchen Timer can also be embedded in various
pieces of equipment and areas of the kitchen.
When in Holding Mode, each screen displays 9 items in horizontal orientation and
up to 8 in vertical orientation. When in Cook Mode, the left panel displays up to 4
items and up to 12 active timers on the right panel. In both modes you can scroll
through items, with up to 1000 programmable items total per unit. Use the timer as
a standalone or connect up to 7 additional units for added functionality such as the
ability to transfer items from a cook timer to a hold timer. Chiey, with the ability to
wirelessly program the SKT through PC or laptop the customization, adaptability, and
value provided are unrivaled.
Looking to monitor temperature or humidity as well? Pair a Gateway and up to 20
Wireless Sensor Modules for the ultimate freshness timer! Furthermore, when
connected to the Renau Cloud the SKT interfaces with our Smart Kitchen System
allowing it to be monitored and programmed remotely from anywhere in the world
with a Wi-Fi connection!
Are you ready to start building your very own connected kitchen? Our sleek 6.8″ Smart
Kitchen Timer provides a much needed alternative to the big, unruly, and expensive
eyesores that have become so common in the kitchen. Bring your kitchen into the
future with Renau’s T-2268 Smart Kitchen Timer!
• Durable and glove safe 6.8” touch screen
• Compatible with Renau’s Wireless Sensor Modules
• Multi-language support
• Simple wireless conguration
• Customizable action messages
• Congurable task reminders
• Extensive library of icons with the ability to upload your own
• Transfer items between cook and hold timers
• Customizable day parts
• Congurable in vertical and horizontal orientation
• Job aids
• Use as a standalone unit or connect up to 7 additional SKTs
• And much more!
Renau’s T-2268 6.8” touchscreen cook/hold Smart Kitchen Timer (SKT)
gives food service operators total oversight of their operations while
guaranteeing freshness and consistency to their customers.
Features Include:
About the SKT
5
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
Clean only with a damp cloth. No detergents or substances containing alcohols or solvents may
be used to clean this device.
This device meets the emission and immunity requirements of PN-EN IEC 55014-1: 2021 on the
EU market.
Safety and General Information
Cleaning and Care:
General:
Caution:
6
Accessing the Conguration Tool
The Conguration Tool is accessed through your browser. It’s used to add and change
programming for the SKT. In the Conguration Tool you may create food groups, items, job aids,
devices, as well as add Wireless Sensor Modules and Gateways.
1. Connecting for the rst time: Connect the included power supply to the back of the
unit and insert the plug into a wall outlet. Initial power up may take up to 30 seconds.
Once the Smart Kitchen Timer has powered on, rotate the screen by tapping on the blue
button until the desired orientation is set. Once nished, tap “Next.” Continue with steps
2-6.
Reconnecting to the Conguration Tool: Hold the “RENAU” logo in the main screen,
enter the PIN number, Click on “Setup”, and nally select “Recongure Device.” Continue
with steps 2-6.
Warning: You must use the included power supply, or a Renau approved replacement.
Use of a third-party power supply or any other replacement not approved by Renau will
void the warranty.
2. Select the desired device operation mode:
Connected: Allows for communication between multiple SKT’s. If this is the main
connected SKT, select “Master.” Otherwise, select “Slave.” If selecting Slave, refer to pages
10-11 on how to establish a Master/Slave relationship. If you will be adding a Gateway or
Sensor Module, the SKT must be used in connected mode.
Standalone: Allows for the SKT to work as a single standalone device with reduced setup
requirements. Once congured, Standalone Devices do not require a WiFi dongle inserted
at all times.
3. The SKT should now display a screen with an SSID, an IP Address, and a Conguration
Tool PIN.
Note: Before getting started, ensure that the Wi-Fi Dongle provided in the packaging is inserted
into the USB port on the SKT.
Note: The preprogrammed PIN number for all new units is 4444. If you would like to change this
number, you may do so later in the SKT menu.
7
Accessing the Conguration Tool (cont.)
4. Open the Wi-Fi settings in your computer and connect to the Wi-Fi network matching the SSID.
If your computer is currently using Wi-Fi to access the internet, you will no longer have an
internet connection during conguration. If you are connected to the internet via Ethernet
cable, you will not lose your connection.
Note: When connecting your PC to the SSID displayed on the SKT you may see that initially
the network is locked. If this is the case, simply close the network selection window, wait a few
seconds, and then reopen it until the network is open.
5. After the WiFi connection has been established open a web browser and enter the IP address
listed on the SKT screen into the browser bar to access the Conguration Tool.
Tip: It is recommended that you enable either private browsing or incognito mode on your
browser in order to avoid any possible caching issues with cookies. The Conguration Tool has
been optimized for Google Chrome and Safari browsers.
Note: The SKT should remain on the SSID screen for the duration of programming. If at any
point during programming through the Conguration Tool the SKT is powered down or you exit
the SSID screen, the SKT will lose its connection. To return to the SSID screen, access the menu
on the SKT and locate “Recongure Device” inside the “Setup” tab. If you accidentally skipped
ahead to the “Device Assignment” or “Conguration Summary” page, simply tap the “Back”
button on the SKT until you return to the SSID screen. Reconnect the SKT to the Conguration
Tool to continue.
6. Login with the PIN provided on the SKT
to access the Conguration Tool.
(Pin # will be unique each new session.)
7. You will not land in the Conguration Tool dashboard.
To help familiarize yourself with the Conguration Tool, follow the “Tutorial Wizard” on the home
page. You can also nd instructional videos on the renau.com website.
8
Creating a Food Group
The SKT allows for the programming of 16 groups with up to 4 groups per SKT. Food Groups
are useful for navigating larger menus by grouping and categorizing items which are similar or
related.
1. Click “Food Groups” in the “Components” side menu
2. Click “+ Add Group,” then enter the desired group name and group label before saving by
clicking the oppy disk icon.
3. Repeat as necessary for any additional Food Groups
Note: Group Labels will display on the SKT with the given Group Label. When deselected
they will appear gray and when selected they will appear green.
9
Creating an Item
The SKT allows for the programming of up to 1000 items on a single device, and up to 8 duty
cycles and messages fora standard item. Items can be anythingfrom food items and ingredients
to tasks and events. To create a new item, rst access the Conguration Tool, click “Items” in
the “Components” side menu, then click “Add Item” to begin the item creation process. Before
continuing, decide whether you would like to create a standard timer, a Daily Based Timer, or a
Continuous Timer.
Standard Timer: This is the default timer when creating a new item. A standard timer will count
down from the set total time, display the desired alert message(s), and then complete once the
nal message is cleared by the user.
1. First, enter the desired item name.
2. Click the “+” button under the message label, enter the desired cook/hold time, enter the
message you would like displayed upon timer completion and select “Create.” Repeat as
necessary for any additional duty cycles.
Tip: You can also manage all of your programmed messages through the “Messages” tab in
the side menu. Adding messages in this menu also provides the option to add the same
message translated to the desired language.
3. Click the question mark under “Add or Select Icon” and either select an icon from the
database or upload your own by accessing the “Icons” tab.
4. Select the group you would like to associate the item with or select “Non-Group.”
Tip: If you would rather have an item visible on the SKT screen at all times, selecting Non-
Group would be the preferred option.
5. Lastly, save your changes by clicking the oppy disk icon.
Daily Based Timer: This creates a timer for which an alert will be displayed every day at the
specied time. You also have the ability to select multiple times of the day for which you would
like to receive the alert.
Continuous Timer: Selecting this option will create a timer that will repeat at a specied interval.
You must rst clear the triggered alert message before the timer will automatically reset.
10
Pairing SKTs
The SKT allows for the pairing of up to 7 Slave units with a Master. The Slave units do not need to
be individually programmed. You will create congurations for all paired SKT’s using the Master
by connecting it to the Conguration Tool and creating individual Devices to be assigned as
stations for the Slave units. To use SKT’s in a Master/Slave relationship, you must have a WiFi
dongle inserted into the USB port of all devices at all times.
1. To start, be sure that all SKT’s are congured in the “Connected” operating mode. To
do this, enter the “Setup” tab in the SKT menu, tap “Recongure Device”, and select
“Connected” as the operating mode. Do this on all units you wish to pair.
2. Select “Master” as the device type on the primary SKT (normally this would be the unit
you plan on using as a cook timer) and select “Slave” for the remaining units.
Note: There can only be one Master device in a setup.
3. At this point you will leave the Slave unit(s) alone and continue by connecting the Master
to the Conguration Tool.
4. Once the Master is connected to the Conguration Tool, proceed with programming all of
your items not just for the Master but for the Slave unit(s) as well. When nished, click the
“+” under “Devices” on the side menu, set the desired device conguration for the Master
device, click “Next Step”, and populate the mock screen as desired with the appropriate
items. Once nished, click “Save Device”. Repeat the last step but this time create Devices
for all Slave units. When nished, click “Send to Device” on the side menu.
Tabla de contenidos
Otros manuales de Minutero de Renau
