Reliable JL-17 Guía del usuario
The Reliable Automatic Sprinkler Co., Inc., 103 Fairview Park Drive, Elmsford, New York 10523
Bulletin 019 Rev. A
Bulletin 019 Rev. A
Model JL-17 (SIN RA1914)
Early Suppression
Fast Response Sprinkler
Product Description
The Reliable Model JL-17 Early Suppression Fast Re-
sponse (ESFR) Sprinkler is intended for use against
severe fire challenges. This sprinkler is designed to re-
spond quickly to growing fires and will deliver a heavy
water discharge to “suppress” rather than “control”
fires.
Note: The Model JL-17 ESFR sprinkler utilizes a le-
vered fusible alloy solder link in either a 165°F (74°C)
or a 212°F (100°C) rating. FM Global considers this
a “Quick Response” storage sprinkler for use in Data
Sheet 8-9.
The sprinkler has a Nominal K Factor of 16.8 (metric
241,9) and will deliver approximately 121 gpm (458 L/
min) of water at 52 psi (3,6 bar).
The smaller deflector and frame provide a broad, very
symmetrical, hemispherical pattern capable of sup-
pressing fires between sprinklers in high storage height
areas and at the same time retaining a high momentum
central core to penetrate and suppress fires occurring
directly beneath the sprinkler in low storage height ar-
eas.
The JL-17 ESFR sprinkler was designed to be short-
er, and more compact than other ESFR sprinklers. The
shorter sprinkler allows piping to be installed further from
the ceiling and obstructions. The JL-17 ESFR sprinkler is
also less susceptible to damage due to smaller deflec-
tor and frame design. The lighter JL-17 ESFR passed
rough use and abuse test in the labs without plastic pro-
tectors.
Application and Installation
The Model JL-17 ESFR sprinkler is intended for instal-
lation in accordance with NFPA 13 and FM Loss Preven-
tion Data Sheets 2-0 and 8-9, as well as the Authority
Having Jurisdiction.
The Model JL-17 ESFR sprinkler is designed for ceil-
ing only sprinkler system with no in-rack sprinklers re-
quired. For encapsulated or non-encapsulated includ-
ing cartoned unexpanded plastics of up to 35 ft (10,7m)
with ceiling heights to 40 ft (12,2m). Model JL-17 ESFR
is also use for cartoned expanded plastics up to 25 ft
(7,6m) with ceilings heights to 30 ft (9,1m) as well as
some storage arrangements of rubber tires, rolled pa-
per, and aerosols.
For storage protection that have up to 40 ft (12,2m)
storage heights with 45 ft (13.7m) ceiling heights, Model
JL-17 ESFR can be used with one level of in-rack sprin-
klers.
Model JL-17 ESFR Sprinkler
Design Criteria
General guidelines:
Sprinkler Position: Pendent, align frame arms with
the pipe. Deflectors should be parallel with the ceil-
ing or roof.
System Type: Wet Pipe Systems Only
Maximum area of coverage: 100 ft2(9,3m2), greater
coverage area are allowable in some cases.
Minimum area of coverage: 64 ft2(5,8m2)
Maximum slope ceiling: 2/12 pitch (9.5°)
Maximum spacing: 12 ft (3,7m) for building heights
up to 30 ft (9,1m) and 10 feet (3,1m) for building
heights greater than 30 ft (9,1m)
Minimum spacing: 8 feet (2,4m2)
Deflector distance from walls: At least 4 inches
(102mm) from walls, and no more than one-half the
allowable distance permitted between sprinklers.
Deflector to Top of Storage: at least 36in (914mm).
Deflector to ceiling Distance: 6-14 in (152-356mm)
per NFPA 13. 5-14 in (121-35mm) per FM 2-2.
Center Line of Thermal Sensing
Element To Ceiling Distance: 4-13 in (102-330mm)
per FM
Listings and Approvals
Listed by Underwriters Laboratories Inc. and UL certified
for Canada (cULus)
FM Approved as a storage sprinkler
VdS Schadenverhütung GmbH (VdS)
Loss Prevention Certification Board (LPCB)
1.
2.
3.
4.
Model JL-17 Temperature Ratings and Approvals
Classification
Sprinkler
Temperature Link
Color
Frame
Color
Maximum Ambient
Temperature Approvals
Sprinkler
Identification
Number
(SIN)
°F °C °F °C
Ordinary
Intermediate
165
212
74
100
Black
White
Uncolored
White
100
150
38
66
UL, FM, VdS, LPCB
UL, FM, VdS, LPCB RA1914
Installation Data
Sprinkler
Type
Thread
Size
“K” Factor Maximum
Working
Pressure
Finish
US Metric
Pendent
Only ¾” (R¾) 16.8 241,9 175 psi (12,1 bar) Bronze
Maintenance
The Model JL-17 ESFR Sprinkler should be inspected
quarterly and the sprinkler system maintained in accor-
dance with NFPA 25. Do not clean sprinkler with soap and
water, ammonia or any other cleaning fluid. Remove any
sprinkler that has been painted (other than factory applied)
or damaged in any way. A stock of spare sprinklers should
be maintained to allow quick replacement of damaged or
operated sprinklers. Prior to installation, sprinklers should
be maintained in the original cartons and packaging until
used, to minimize the potential for damage to sprinklers
that would cause improper operation or non-operation.
Once operated, automatic sprinklers cannot be reassem-
bled and reused. New sprinklers of the same size, type
and temperature rating must be installed. A cabinet of re-
placement sprinklers should be provided for this purpose.
Model JL-17 ESFR Sprinkler Specification
Sprinklers shall be Early Suppression Fast Response
(ESFR) pendent suppression mode sprinklers specifically
tested and [UL Listed] [FM Approved] for commodity stor-
age applications. Sprinkler frame and deflector to be of
bronze construction. Fusible link assembly shall utilize the
strut and lever principle of operation with approved fast
response black-painted or white-painted beryllium-nickel
thermal element. Water seal shall consist of a Teflon-coated
Bellville spring washer and brass cap assembly contain-
ing no plastic parts. ESFR sprinklers shall have a nominal
K-factor of 16.8 with ¾” NPT threaded end connections.
Sprinkler temperature rating shall be [Ordinary 165°F
(74°C)] [Intermediate 212°F (100°C)]. ESFR pendent
sprinklers shall be Reliable Model JL-17 (Bulletin 019).
Use only the Model J1
sprinkler wrench for re-
moval and installation. Any
other type of wrench may
damage the sprinkler.
Model J1 Sprinkler Wrench
Note: When handling sprinklers, hold sprinklers only on
frame arms and do not apply any force on the link as-
sembly. Sprinklers should be tightened between 14-20
ft-lbs (19-27,1 Nm) torque.Sprinklers not tightened to
recommended torque may cause leakage or impairment
of the sprinkler. Damage sprinklers must be replaced im-
mediately.
Ordering Information
Specify:
1. Temperature rating
2. Thread type 3/4” NPT or ISO 7-R3/4
Note: Grooved sprinkler boss provided to ensure that the
sprinkler wrench does not slip during installation.
2.
Palletize and Solid Pile Storage
Commodity Max. Building Height
ft (m)
Max. Storage Height
ft (m)
Min. Pressure
psi (bar)
cULus FM
Class I, II, III, IV
Encapsulated or Unencapsulated
Cartoned Unexpanded Plastics
45 (13,7) 35 (10,7) -- 63 (4,3)
40 (12,2) 35 (10,7) 52 (3,6) 52 (3,6)
35 (10,7) 30 (9,1) 52 (3,6) 52 (3,6)
32 (9,7) 25 (7,6) 42 (2,9) 52 (3,6)
30 (9,1) 25 (7,6) 35 (2,4) 35 (2,4)
Uncartoned (Exposed)
Unexpanded Plastics
45 (13,7) 35 (10,7) -- 63 (4,3)
40 (12,2) 35 (10,7) 52 (3,6) 52 (3,6)
32 (9,7) 25 (7,6) 42 (2,9) 52 (3,6)
30 (9,1) 25 (7,6) 35 (2,4) 35 (2,4)
Cartoned
Expanded Plastics
32 (9,7) 25 (7,5) 42 (2,9) --
30 (9,1) 25 (7,6) 35 (2,4) 35 (2,4)
Rack Storage
Class I, II, III, IV
Encapsulated or Unencapsulated
Cartoned Unexpanded Plastics
45(1) (13,7) 40(1) (12,2) 63 (4,3) 63 (4,3)
40 (12,2) 35 (10,7) 52 (3,6) 52 (3,6)
35 (10,7) 30 (9,1) 52 (3,6) 52 (3,6)
32 (9,7) 25 (7,6) 42 (2,9) 52 (3,6)
30 (9,1) 25 (7,6) 35 (2,4) 35 (2,4)
Uncartoned (Exposed)
Unexpanded Plastics
45(1) (13,7) 40(1) (12,2) 63 (4,3) 63 (4,3)
40 (12,2) 35 (10,7) 52 (3,6) 60 (4,1)
35 (10,7) 30 (9,1) 52 (3,6) 52 (3,6)
32 (9,7) 25 (7,6) 42 (2,9) 52 (3,6)
30 (9,1) 25 (7,6) 35 (2,4) 35 (2,4)
Cartoned
Expanded Plastics
32 (9,7) 25 (7,6) 42 (2,9) --
30 (9,1) 25 (7,6) 35 (2,4) 35 (2,4)
(1) One level of in-rack sprinklers required
Idle Pallet Storage
Type of Arrangement
and Method
Max. Building Height
ft (m)
Max. Storage Height
ft (m)
Min. Pressure
psi (bar)
cULus FM
Wood or Plastic Pallets
on Floor
40 (12,2) 35 (10,7) 52 (3,6) 52 (3,6)
32 (9,7) 25 (7,6) 42 (2,9) 52 (3,6)
30 (9,1) 25 (7,6) 35 (2,4) 35 (2,4)
Plastic Pallets in Open Racks
40 (12,2) 35 (10,7) 75 (5,2) 60 (4,1)
35 (10,7) 30 (9,1) 75 (5,2) 52 (3,6)
35 (10,7) 20 (6,1) 75 (5,2) 52 (3,6)
32 (9,7) 20 (6,1) 60 (4,1) 52 (3,6)
30 (9,1) 25 (7,6) 50 (3,4) 35 (2,4)
30 (9,1) 20 (6,1) 50 (3,4) 35 (2,4)
Rubber Tire Storage
On-side or On-thread
In Palletized Portable Racks
Open Portable Racks or Fixed Racks
Without Solid Shelves
30 (9,1) 25 (7,6) 35 (2,4) 35 (2,4)
Note: Other methods and arrangements follow K-17 ESFR design criteria per NFPA.
For Rolled Paper Storage see NFPA 13.
For Aerosol Storage see NFPA 30B.
3.
The Reliable Automatic Sprinkler Co., Inc.
(800) 431-1588 Sales Offices
(800) 848-6051 Sales Fax
(914) 829-2042 Corporate Offices
www.reliablesprinkler.com Internet Address
Manufactured by
Recycled
Paper
Revision lines indicate updated or new data.
EG. Printed in U.S.A 11/10 P/N 9999970379
The equipment presented in this bulletin is to be installed in accordance with the latest published Standards of the National Fire Protection Association, Factory
Mutual Research Corporation, or other similar organizations and also with the provisions of governmental codes or ordinances whenever applicable.
Productsmanufactured and distributed by Reliable have been protecting life and property for over 90 years, and are installed and serviced by the most highly
qualified and reputable sprinkler contractors located throughout the United States, Canada and foreign countries.
Automatic sprinklers
Flush automatic sprinklers
Recessed automatic sprinklers
Concealed automatic sprinklers
Adjustable automatic sprinklers
Dry automatic sprinklers
Intermediate level sprinklers
Open sprinklers
Spray nozzles
Alarm valves
Retarding chambers
Dry pipe valves
Accelerators for dry pipe valves
Mechanical sprinkler alarms
Electrical sprinkler alarm switches
Water flow detectors
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Deluge valves
Detector check valves
Check valves
Electrical system
Sprinkler emergency cabinets
Sprinkler wrenches
Sprinkler escutcheons and guards
Inspectors test connections
Sight drains
Ball drips and drum drips
Control valve seals
Air maintenance devices
Air compressors
Pressure gaugesIdentification signs
Fire department connection
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Reliable offers a wide selection of sprinkler components. Following are some of the many
precision-made Reliable products that guard life and property from fire around the clock.
Reliable...For Complete Protection
Otros manuales de Sistema de riego de Reliable
Reliable
Reliable RFC43 Manual de usuario
Reliable
Reliable GFR VELO–ECOH Manual
Reliable
Reliable N25 Manual de usuario
Reliable
Reliable DH56 HSW-PL Manual
Reliable
Reliable F156 Series Manual
Reliable
Reliable F1FR Manual de usuario
Reliable
Reliable F1 Res 30 LL Manual
Reliable
Reliable F1FR-FS56 Manual de usuario
Reliable
Reliable F3-80 Dry Pendent Manual de usuario
Reliable
Reliable F1FR QREC Manual
Reliable
Reliable G5-56 Dry Manual de usuario
Reliable
Reliable RFC43 LL Guía del usuario
Reliable
Reliable The Non-Ferrous Concealer F4FR-NF Manual de usuario
Reliable
Reliable RFC30 Manual de usuario
Reliable
Reliable F1FR80 Series Manual de usuario
Reliable
Reliable Concealer G4A Manual de usuario
Reliable
Reliable F3-80 Series Manual de usuario
Reliable
Reliable G Series Manual de usuario
Reliable
Reliable HL22 Manual
Reliable
Reliable G Series Manual
Manuales populares de Sistema de riego de otras marcas
Hunter
Hunter Institutional Series Manual de usuario
Cellfast
Cellfast 52-305 Manual de usuario
Tyco Fire Product
Tyco Fire Product Star Galaxy SGQR Manual de usuario
Tyco Fire Product
Tyco Fire Product CENTRAL A Manual de usuario
Oral Care Technologies
Oral Care Technologies Hydro Floss Manual de usuario
Tyco Fire Product
Tyco Fire Product Gem F892 Manual de usuario
