Reliable F3QR56 Manual de usuario

The Reliable Automatic Sprinkler Co., Inc., 103 Fairview Park Drive, Elmsford, New York 10523

Multilingual document:

Select your language below

Model F3QR56

Dry K5.6 (80 metric)

Quick-Response,

Standard Spray Sprinklers

Features

1. Available in the following conﬁgurations:

• Pendent with standard escutcheon

• Pendent with Model HB extended escutcheon

• Pendent with Model FP recessed escutcheon

• Pendent with Model F1 recessed escutcheon

• Concealed Pendent with Model CCP cover plate

• Horizontal Sidewall with Standard escutcheon

• Horizontal Sidewall with Model HB extended

escutcheon

• Horizontal Sidewall with Model FP

recessed escutcheon (FM Standard Response)

• Horizontal Sidewall with Model F1

recessed escutcheon (FM Standard Response)

2. Available with 1" NPT, ISO 7‑1R1, 3/4" NPT, or ISO 7‑1

3/4inlet ﬁtting.

3. 3/4" NPT inlet ﬁttings permit replacement of older 3/4"

inlet dry sprinklers without changing to a larger sprinkler

ﬁtting.

4. Sprinklers, escutcheons, and cover plates are available

in a wide variety of standard and special application

ﬁnishes.

5. White polyester, black polyester, and Electroless

Nickel PTFE (ENT) ﬁnish sprinklers are cULus Listed as

Corrosion Resistant.

6. Available with cULus Listed 250 psi (17.2 bar) pressure

rating for Dry Pendent and select HSW conﬁgurations.

FM Approved for 175 psi (12 bar).

Product Description

Model F3QR56 Dry sprinklers are quick‑response,

standard coverage sprinklers with a nominal K‑factor of

5.6 (80 metric). Available in Dry Pendent or Dry Horizontal

Sidewall conﬁgurations, Model F3QR56 Dry sprinklers all use

a 3 mm glass bulb operating element. See the Temperature

Ratings table in this Bulletin for available temperature ratings.

Model F3QR56 Dry sprinklers are intended for installation

on wet‑pipe, dry‑pipe, or preaction sprinkler systems in

accordance with NFPA 13, FM Property Loss Prevention

Data Sheets, and other applicable installation standards.

Model F3QR56 Dry sprinklers are available with a variety

of escutcheon options as illustrated in Figs. 1 through 3 and

Figs. 5 through 9. In addition, Model F3QR56 Dry Pendent

sprinklers are also available with the Model CCP conical

concealed cover plate as illustrated in Fig. 4. Available

sprinkler, escutcheon, and cover plate ﬁnishes are identiﬁed

in the Finishes table in this Bulletin. The Model F1 escutcheon,

Model FP escutcheon, and Model CCP cover plate are the

Concealed

(See Fig. 4)

Recessed FP Pendent

(See Fig. 3)

Recessed F1

Horizontal Sidewall

(See Fig. 9)

Horizontal Sidewall

(See Fig. 6)

Pendent

(See Fig. 1)

Recessed F1 Pendent

(See Fig. 5)

Recessed FP

Horizontal Sidewall

(See Fig. 8)

Pendent / HB

(See Fig. 2)

Horizontal Sidewall / HB

(See Fig. 7)

Bulletin 157 Rev. M_Multilingual

only recessed escutcheons and cover plate listed for use with

Model F3QR56 Dry sprinklers; the use of any other recessed

escutcheon or cover plate with Model F3QR56 Dry sprinklers

will void all guarantees, warranties, listings and approvals.

Inlet ﬁttings are available with 1" NPT, ISO 7‑1R1, 3/4"

NPT, or ISO 7‑1R

3/4threads. Sprinklers with 3/4" NPT

and ISO 7‑1R

3/4inlet ﬁttings are intended primarily for

replacement of existing 3/4" or ISO 7‑1R

3/4inlet dry

sprinklers, but may also be used in new installations.

See the Available Conﬁgurations, Listings, and Approvals

table in this Bulletin for further information on Model F3QR56

Dry sprinklers.

Available Conﬁgurations, Listings, and Approvals

Sprinkler Model Escutcheon or

Cover Plate Available Length

(See Figs. 1-9) Listings and

Approvals(1) Inlet Threads Sprinkler Identiﬁcation

Number (SIN)

F3QR56 Dry Pendent

Standard Escutcheon 2"‑36" (50‑900 mm)

cULus, NYC

3/4" NPT

ISO 7‑1R

3/4

R5714

HB Extended Escutcheon

‑

1/2"‑36"

(90‑900 mm)

F1 Recessed Escutcheon

FP Recessed Escutcheon

CCP Cover Plate

Standard Escutcheon 2"‑48" (50‑1200 mm)

cULus, FM, NYC 1" NPT

ISO 7‑1R1

HB Extended Escutcheon

‑

1/2"‑48"

(90‑1200 mm)

F1 Recessed Escutcheon

FP Recessed Escutcheon

CCP Cover Plate

F3QR56 Dry

Horizontal Sidewall

Standard Escutcheon 2"‑48" (50‑1200 mm)

cULus(2), NYC(2)

3/4" NPT

ISO 7‑1R

3/4

R5734

HB Extended Escutcheon

‑

1/2"‑48"

(90‑1200 mm)

F1 Recessed Escutcheon

FP Recessed Escutcheon

Standard Escutcheon 2"‑48" (50‑1200 mm)

cULus(2), FM(3), NYC(2)

1" NPT

ISO 7‑1R1

HB Extended Escutcheon 3

‑

1/2"‑48"

(90‑1200 mm)

F1 Recessed Escutcheon 3

‑

1/2"‑48"

(90‑1200 mm) cULus(2), FM(3)(4), NYC(2)

FP Recessed Escutcheon

(1) For available temperature ratings and ﬁnishes see the Temperature Ratings and Finishes tables, respectively, in this Bulletin.

(2) cULus Listing and NYC for Light Hazard and Ordinary Hazard only.

(3) FM Approved for Light Hazard only.

(4) Model F3QR56 Dry Horizontal Sidewall with Model F1 or Model FP recessed escutcheon are FM Approved as Standard Response.

Patents

Model F3QR56 Dry series sprinklers may be covered by one or more of the following patents:

US Patent No. 5.775.431

US Patent No. 5.967.240

Listing and Approval Agencies

See the Available Conﬁgurations, Listings, and Approvals table in this Bulletin for listings and approvals applicable to each

available conﬁguration.

1. Listed by Underwriters Laboratories, Inc. and UL Certiﬁed for Canada (cULus)

2. Certiﬁed by FM Approvals (FM)

3. Permitted in New York City based on UL Listing per Local Law 33/2007 (NYC)

Technical Data

Nominal K‑factor: 5.6 gpm/psi½(80 l/min/bar½)

Sprinkler Listing or Approval Deﬂector to Ceiling Distance Maximum Working Pressure

F3QR56 Dry Pendent cULus, NYC —250 psi (17.2 bar)

FM —175 psi (12 bar)

F3QR56 Dry Horizontal Sidewall cULus, NYC 4"‑6" 250 psi (17.2 bar)

6"‑12" 175 psi (12 bar)

FM —175 psi (12 bar)

Temperature

Classiﬁcation Glass Bulb Color Sprinkler

Temperature Rating Cover Plate

Temperature Rating Maximum Ceiling

Temperature Listings and Approvals(1)

Ordinary Orange 135 °F (57 °C) 135 °F (57 °C) 100 °F (38 °C) cULus, FM, NYC

Red 155 °F (68 °C)

Intermediate Yellow 175 °F (79 °C) 165 °F (74 °C) 150 °F (66 °C) cULus, NYC

Intermediate Green 200 °F (93 °C) 165 °F (74 °C) 150 °F (66 °C) cULus, FM, NYC

High Blue 286 °F (141 °C) None 225 °F (107 °C) cULus, FM(2), NYC

165 °F (74 °C) 150 °F (66 °C) cULus, NYC

(1) For listed and approved sprinkler, escutcheon, and inlet conﬁgurations see the Available Conﬁgurations, Listings, and Approvals table in this Bulletin.

(2) High temperature classiﬁcation is FM Approved with Standard and Model HB escutcheons only.

Finishes

Component Sprinkler Escutcheon(1) Cover Plate

Standard Finishes

Bronze Brass(3) White Paint

White Polyester(2) White Polyester Chrome

Chrome Chrome

Special Application Finishes

Electroless Nickel PTFE(2)

Electroless Nickel PTFE

Black Polyester

Customer Color Polyester

Satin Chrome

Black Paint

Custom Color Paint

Black Plating

Black Polyester(2)

Custom Color Polyester

(1) Standard and Model HB escutcheons are supplied with both the can and escutcheon ﬁnished. Model F1 escutcheons are supplied with both the collar

and escutcheon ﬁnished. Model FP escutcheons are supplied with the escutcheon ﬁnished; the cup is galvanized steel with no further ﬁnish.

(2) cULus Listed as a Corrosion Resistant Sprinkler.

(3) Brass ﬁnish available for standard, Model F1, and Model FP escutcheons only.

153FG01-G

Note: The sprinkler can protrudes 1/4" when escutcheon is in nominal position. Escutcheon adjustment provides −1/4" (−6 mm) to +1

‑

1/4" (+32 mm) “A”

dimension adjustment range.

Sprinkler Guard: Model C2

Fig. 1

Model F3QR56 Dry Pendent Sprinkler with Standard Escutcheon (SIN R5714)

“A” Dim. 2" to 48" (51 mm to 1219 mm) in 1/4" (6 mm) increments for 1" connections or

2" to 36" (51 mm to 914 mm) in 1/4" (6 mm) increments for 3/4" connections

SYSTEM FITTING

INLET FITTING

“A” DIMENSION

‑

1/8" (54 mm DIA.

HOLE IN CEILING

‑

21/32" DIA. (42 mm)

SPRINKLER CAN

ESCUTCHEON

NOMINAL

ESCUTCHEON

POSITION

1/4" (6 mm) PROTRUSION AT

NOMINAL ESCUTCHEON POSITION

‑

1/2" (38 mm)

TOTAL ADJUSTMENT

‑

1/4" (32 mm)

ESCUTCHEON ADJUSTMENT

1/4" (6 mm)

ESCUTCHEON ADJUSTMENT

‑

5/8" (41 mm)

3" (76 mm) DIA.

CEILING

157FG02B

Model F3QR56 Dry Pendent Sprinkler with Model HB Extended Escutcheon (SIN R5714)

“A” Dim. 3

‑

1/2" to 48" (89 mm to 1219 mm) in 1/4" (6 mm) increments for 1" connections or

‑

1/2" to 36" (89 mm to 914 mm) in 1/4" (6 mm) increments for 3/4" connections

Note: The sprinkler can protrudes 1

‑

1/4" when escutcheon is in nominal position. Escutcheon adjustment provides −1/2" (−12.7 mm) to +1/2" (+12.7 mm) “A”

dimension adjustment range.

Sprinkler Guard: Model C2

Fig. 2

SYSTEM FITTING

INLET FITTING

1/2" (12.5 mm)

ESCUTCHEON ADJUSTMENT

1" (25 mm) TOTAL

ESCUTCHEON ADJUSTMENT

1/2" (12.5 mm)

ESCUTCHEON ADJUSTMENT

NOMINAL POSITION

OF ESCUTCHEON

‑

5/8" (41 mm)

‑

1/2" (89 mm)

ESCUTCHEON DIA.

‑

1/2" (64 mm DIA.

HOLE IN CEILING

“A” DIMENSION

CEILING

ESCUTCHEON

‑

1/4" (32 mm) PROTRUSION AT

NOMINAL ESCUTCHEON POSITION

‑

3/16" (56 mm) DIA.

SPRINKLER CAN

153FG02-F

Note: Do not install the Model F3QR56 Dry Pendent sprinkler with the Model FP escutcheon in ceilings which have positive pressure in the space above.

Fig. 3

Model F3QR56 Dry Pendent Sprinkler with Model FP Recessed Escutcheon (SIN R5714)

“A” Dim. 3

‑

1/2" to 48" (89 mm to 1219 mm) in 1/4" (6 mm) increments for 1" connections or

‑

1/2" to 36" (89 mm to 914 mm) in 1/4" (6 mm) increments for 3/4" connections

SYSTEM FITTING

INLET FITTING

1/4" (6 mm)

ESCUTCHEON ADJUSTMENT

‑

1/2" (64 mm DIA.

HOLE IN CEILING

“A” DIMENSION

CEILING

ESCUTCHEON

NOMINAL

ESCUTCHEON

POSITION

‑

7/32" (82 mm) DIA.

SPRINKLER

CUP

CEILING

1/4" (6 mm)

ESCUTCHEON ADJUSTMENT

1/2" (12 mm) TOTAL

ESCUTCHEON ADJUSTMENT

‑

9/32" (58 mm) DIA.

153FG03-F

Model F3QR56 Dry Pendent Sprinkler with Model CCP Cover Plate (SIN R5714)

“A” Dim. 3

‑

1/2" to 48" (89 mm to 1219 mm) in 1/4" (6 mm) increments for 1" connections or

‑

1/2" to 36" (89 mm to 914 mm) in 1/4" (6 mm) increments for 3/4" connections

Note: Do not install the Model F3QR56 Dry Pendent sprinkler with the Model CCP cover plate in ceilings which have positive pressure in the space above.

Fig. 4

‑

1/2" (64 mm DIA.

HOLE IN CEILING

NOMINAL COVER

PLATE POSITION

3/16" (5 mm) COVER

PLATE ADJUSTMENT

3/16" (5 mm) COVER

PLATE ADJUSTMENT

3/8" (10 mm) TOTAL COVER

PLATE ADJUSTMENT

SYSTEM FITTING

INLET FITTING

SPRINKLER CUP

ASSEMBLY

MODEL CCP 1/2 COVER PLATE

ASSEMBLY (ADJUSTMENT

LIMITED TO 3/8" [10 mm])

CEILING

‑

5/16"

(84 mm) DIA.

‑

9/32" (58 mm) DIA.

“A” DIMENSION

157FG05B

Model F3QR56 Dry Pendent Sprinkler with Model F1 Recessed Escutcheon (SIN R5714)

“A” Dim. 3

‑

1/2" to 48" (89 mm to 1219 mm) in 1/4" (6 mm) increments for 1" connections or

‑

1/2" to 36" (89 mm to 914 mm) in 1/4" (6 mm) increments for 3/4" connections.

Fig. 5

SYSTEM FITTING

INLET FITTING

1/4" (6 mm)

ESCUTCHEON ADJUSTMENT

‑

1/4" (57 mm DIA.

HOLE IN CEILING

“A” DIMENSION

CEILING

ESCUTCHEON

CEILING

‑

27/32" (72 mm) DIA.

1/4" (6 mm)

ESCUTCHEON ADJUSTMENT

1/2" (12 mm) ADJUSTMENT

‑

15/16" (49 mm) DIA.

1/8" (3 mm)

NOMINAL

ESCUTCHEON POSITION

157FG06B

Note: The sprinkler can protrudes 1/4" when escutcheon is in nominal position. Escutcheon adjustment provides −1/4" (−6 mm) to +1

‑

1/4" (+32 mm) “A”

dimension adjustment range.

Fig. 6

Model F3QR56 Dry Horizontal Sidewall Sprinkler with Standard Escutcheon (SIN R5734)

“A” Dim. 2" to 48" (51 mm to 1219 mm) in 1/4" (6 mm) increments for 1" connections or

2" to 36" (51 mm to 914 mm) in 1/4" (6 mm) increments for 3/4" connections

‑

1/8" (54 mm) DIA.

HOLE IN WALL

‑

1/4" (32 mm)

ESCUTCHEON ADJUSTMENT

‑

1/2" (38 mm) TOTAL COVER

PLATE ADJUSTMENT

SYSTEM FITTING

INLET FITTING

SPRINKLER CAN

1/4" (6 mm) PROTRUSION AT

NOMINAL ESCUTCHEON POSITION

CEILING

WALL

5/8" (16 mm)

“A” DIMENSION

1/4" (6 mm)

ESCUTCHEON ADJUSTMENT

3" (76 mm)

NOMINAL ESCUTCHEON POSITION

WALL

4" (102 mm) MIN.

12" (305 mm) MAX.

‑

3/32"

(53 mm)

157FG07B

Model F3QR56 Dry Horizontal Sidewall Sprinkler with Model HB Escutcheon (SIN R5734)

“A” Dim. 3

‑

1/2" to 48" (89 mm to 1219 mm) in 1/4" (6 mm) increments for 1" connections or

‑

1/2" to 36" (89 mm to 914 mm) in 1/4" (6 mm) increments for 3/4" connections

Note: The sprinkler can protrudes 1

‑

1/4" when escutcheon is in nominal position. Escutcheon adjustment provides −1/2" (−12.7 mm) to +1/2" (+12.7 mm) “A”

dimension adjustment range.

Fig. 7

SYSTEM TEE INLET FITTING

1/2" (12.7 mm)

ESCUTCHEON ADJUSTMENT

‑

1/2" (63.5 mm) DIA.

HOLE IN WALL

“A” DIMENSION

CEILING

ESCUTCHEON

WALL

‑

1/2" (88.9 mm)

ESCUTCHEON

DIA.

4" (101.60 mm) MIN.

12" (304.80 mm) MAX.

‑

13/64"

(55.88 mm)

DIA.

NOMINAL POSITION

OF ESCUTCHEON

SPRINKLER CAN

‑

3/32"

(53.18 mm)

DIA.

‑

1/4" (31.75 mm) NOMINAL PROTRUSION

1/2" (12.7 mm)

ESCUTCHEON ADJUSTMENT

1" (25.4 mm) TOTAL ADJUSTMENT

Otros manuales para F3QR56

Este manual sirve para los siguientes modelos

Otros manuales de Sistema de riego de Reliable

Reliable

Reliable F1FR Manual de usuario

Reliable

Reliable F1FR80VdS Series Manual

Reliable

Reliable Concealer G4A Manual de usuario

Reliable

Reliable F1-42 Series Manual

Reliable

Reliable F1 LO Manual de usuario

Reliable

Reliable N25 ESFR Manual de usuario

Reliable

Reliable F1FR28 Series Manual de usuario

Reliable

Reliable XL Manual de usuario

Reliable

Reliable DDX Type D Manual de mantenimiento

Reliable

Reliable F1FR LO Series Manual

Reliable

Reliable F1FR80 Series Manual de usuario

Reliable

Reliable F1FR Manual de usuario

Reliable

Reliable G Manual de usuario

Reliable

Reliable F1FR56-300 QREC Series Manual de usuario

Reliable

Reliable DH56 HSW Manual de usuario

Reliable

Reliable N252 EC Manual de usuario

Reliable

Reliable F3QR80 Dry Pendent Manual del operador

Reliable

Reliable G6-80 Manual de usuario

Reliable

Reliable F156 Series Manual

Reliable

Reliable F1FR-300 Manual de usuario

Reliable

Reliable J112SS Series Manual

Reliable

Reliable RFC30 LL Manual de usuario

Reliable

Reliable F3QR80 Series Manual de usuario

Reliable

Reliable RFS42 Manual

Manuales populares de Sistema de riego de otras marcas

Hunter

Hunter Institutional Series Manual de usuario

Cellfast

Cellfast 52-305 Manual de usuario

Tyco Fire Product

Tyco Fire Product Star Galaxy SGQR Manual de usuario

Tyco Fire Product

Tyco Fire Product CENTRAL A Manual de usuario

Oral Care Technologies

Oral Care Technologies Hydro Floss Manual de usuario

Tyco Fire Product

Tyco Fire Product Gem F892 Manual de usuario

Netafim

Netafim NETBEAT Manual de usuario

Irrigation-Mart

Irrigation-Mart KIT-GK100-RV-B Manual de usuario

Tyco

Tyco CC3 Manual de usuario

OpenSprinkler

OpenSprinkler OSPi Manual de usuario

EINHELL

EINHELL GE-WW 5537 E Manual de usuario

Valley

Valley Bender160 Manual de usuario

Toro

Toro 730 Series Guía rápida

Eden

Eden 97063-EDAMZ Manual de usuario

Tyco

Tyco TY-L Series Manual de usuario

Tyco Fire Product

Tyco Fire Product CENTRAL ELO-231 Manual de usuario

Johnson Controls

Johnson Controls tyco ESFR-17 Manual de usuario

Victaulic

Victaulic VicFlex I-VICFLEX.AQC-U Manual de usuario