Reliable Empressa S500 Manual de usuario
DIGITAL STEAM PRESS
INSTRUCTION MANUAL
MODEL NO.: Empressa S500
Features of the Digital Steam Press.........................................1
Safety Reminders.....................................................................2
Part Identification.................................................................3-4
oreparation for use...........................................................5
oFilling the water tank.......................................................5
oTurning on the power.......................................................5
oSelecting the temperature.................................................6
oSteam Control Notes........................................................7
oPressing............................................................................8
oFinishing Pressing............................................................9
oCleaning.........................................................................10
Suggestion for Success...........................................................11
Use of the Pressing Cushion..................................................12
Techniques for Pressing......................................................13-14
Troubleshooting..................................................................15-16
AA a
AA a
AA a
AA a
AA a
AA a
AA a
AA a
P
Steam Press Operation
CONTENTS
Digital Steam Press Instruction Manual
Digital Steam Press Instruction Manual Page1
Features of the Digital Steam Press
Your Steam Press provides clean, professional results every time!
Reduces ironing time by up to 50%
Multiple dry-heat and steam settings for all types of fabric
Burst setting removes stubborn wrinkles
Variable temperature selection
Automatic shut-off safety feature while open or closed with audible alert
Over 100lbs. of even pressure ensures sharp, long lasting creases
Easy-to-use one hand operation
Protects delicate fabrics like silk
Non-stick padded ironing board cover
Non stick coating on pressing plate reduces starch build-up and eases cleaning (Optional)
Locking handle makes unit portable
Stores upright
Digital Steam Press Instruction Manual
Page2
SAFETY REMINDERS
WARNING - Read all of the instructions and then save them for future reference.
THIS UNIT IS FOR HOUSEHOLD USE ONLY.
SAVE THESE INSTRUCTIONS
!
!
!
!
!
!
!
!
!
!
To protect against the risk of electric shock, do not immerse
the appliance in water.
Do not let the cord hang over the edge of counters.
Do not allow the cord to touch hot surfaces.
Always allow the appliance to cool for at least thirty minutes
before storing.
Always put the appliance in a secure place on a table or
counter when using.
Do not move the appliance without unplugging it first.
The appliance has very hot surfaces - Do not allow
unsupervised children to use the appliance.
Always disconnect the appliance from the outlet before
filling with or removing water. Be careful to avoid spilling
water on the appliance when filling.
Use distilled water in the appliance. Do not use perfumed or
products containing alcohol in the appliance.
Always disconnect the appliance when not in use.
!
!
!
!
!
!This appliance IS NOT intended for use by young children
or infirm persons unless they have been adequately
supervised by a responsible person to ensure that they can
use the appliance safely.
Do not use the appliance if the cord is damaged. Return the
appliance or have the cord repaired by the manufacturer,
service agent or a similarly qualified person.
Do not operate the appliance if it has been dropped or
damaged. Do not disassemble the appliance. Incorrect
reassembly can cause a risk of electric shock. Send it to an
authorized service center for repair.
Do not operate another high wattage appliance on the same
circuit.
This appliance must be grounded. Do not alter the plug or
attempt to defeat this feature.
Be careful. Burns can occur from touching hot metal parts,
hot water or steam.
Digital Steam Press Instruction Manual Page3
PART IDENTIFICATION
The Pressing Handle raises and lowers the Pressing Plate.
By lowering the Pressing Handle until it reaches the lowest
point possible you automatically obtain maximum pressure.
The Locking Knob will lock together the Pressing Plate and
Ironing Board. Turn the Locking Knob to the locked position
to carry or store the Steam Press.
The Steam Burst Button on the handle grip produces a
burst of steam when pressed.
The Pressing plate is the temperature controlled surface that
heats and presses the fabric.
The Ironing Board is the padded surface that holds the
fabric during pressing.
The [Power] Light (Red) is illuminated when the unit is on.
The [Ready] Light (Green) goes off when the Press has
reached the selected temperature.
The [Steam] Ready Light (yellow) goes on when the unit is
ready to produce bursts of steam.
The *POWER* button turn the appliance ON/OFF.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Press the *SELECT* button arrows to set the desired
temperature for each fabric. NOTE: Steam will only be
available on the three highest settings.(wool cotton linen)
The Water Tank slides forward and is filled through holes
in the top. The Water Level can be seen through the front of
the tank. Slide the tank forward for a better view.
The Ironing Board Cover is removable and washable for
extended use.
10.
11.
12.
Digital Steam Press Instruction Manual
Page4
The multiple function safety features of this appliance turns off electric power to the heater when the Pressing plate has been left against
the Ironing Board for about 10 seconds. If the Pressing plate is left in the open (up) position without use after approximately 15 minutes,
the unit will be automatically shut-off. In both cases press the *POWER* button to restart the steam press.
13. The Pressing Cushion is a fabric covered pad used for pressing gathered or
contoured areas such as sleeves, darts, and yokes.
14. The plastic water Spray Bottle is used for dampening fabric before pressing.
15. The Water Container is used for filling the Water Tank.
The following information is provided for service by a qualified electrician only:
Rated voltage: 120V~, 60Hz, 1350W
WARNING:
This appliance must be grounded. Use only the proper type outlet when plugging in the appliance. Do not attempt to override the
ground wire feature.
100
200
300
400ml
Digital Steam Press Instruction Manual Page5
STEAM PRESS OPERATION
STEP1 - PREPARATION FOR USE
Place the appliance on a sturdy work surface. Unlock the Locking Knob.
STEP 2 - FILLING THE WATER TANK
BEFORE PLUGGING IN THE APPLIANCE, fill the water tank;
1. Always make sure the appliance is unplugged before filling the tank.
2. Fill the Water Tank with the Pressing Plate lifted to the raised (up) position.
Slide the Water Tank towards the front of the unit. It will not come
completely out so do not force it to do so. Using the Water Container,
slowly pour the distilled water into the Water Tank Fill Hole(C).
3. Be careful to avoid spilling water onto the Steam Press when filling.
4. Slide the Water Tank back into its recessed position.
STEP 3 - TURNING ON THE POWER
1. Make sure the Locking Knob (D) is in the open position allowing free
movement of the Pressing Plate before plugging in the appliance.
2. Lift the Pressing plate to the fully raised (up) position.
3. Plug the appliance into an electric outlet.
4. Press the *POWER* button and the Red Power light will illuminate.
Digital Steam Press Instruction Manual
Page6
STEP 4 SELECTING THE TEMPERATURE
Press the *SELECT* arrow buttons to choose the kind of fabric you wish to press. Press to move selection to higher setting and
press to move selection to lower setting.
1. Examine the garment label if unsure and look up the type on the chart.
IMPORTANT NOTE: If you can not determine the type of fabric, begin with the lowest setting and increase the temperature as
desired until you obtain the proper results.
2. When the Green [Ready] Light goes off, the Pressing Plate has reached the correct temperature for the desired setting.
3. When changing the setting from a higher selection to a lower setting allow several minutes for the Pressing Plate to cool
sufficiently after making the change.
IMPORTANT NOTE: You may find it more efficient to arrange your fabrics from those requiring the lowest setting to those
requiring the highest setting and proceed accordingly. This will avoid any unnecessary delays as you wait
for the Pressing Plate to cool.
Digital Steam Press Instruction Manual Page7
STEP 5 - STEAM CONTROL
IMPORTANT NOTE: Steam is produced only when the Yellow [Steam]
Ready light is on.
The Green [Ready] Light goes off when the unit has reached the desired
temperature. The Yellow [Steam] Ready Light will come on when the unit is
ready to produce steam.
IMPORTANT NOTE: If this is the first time you are using the Steam Press
or you have been storing it for some time, lift the
Pressing plate into the raised position and press the
Steam Burst Button several times until the steam
begins to flow.
IMPORTANT NOTE: The Steam Burst function can only be used when the
[Steam] Ready Light is on AND the steam press is
in a slightly opened position. Do not use the Steam
Burst function when the steam press is closed, or
you may damage the unit.
IMPORTANT NOTE: Do not press the Steam Burst Button for more than 5
seconds or water may drip on to your garment.
Digital Steam Press Instruction Manual
Page8
IMPORTANT NOTE: If you forget to raise the Pressing Plate or become distracted, the machine will give a warning beep and
automatically shut-off heating after approximately 10 seconds. The steam press will be completely shut-off after
15 minutes of no activity with the press in the open position.
STEP 6 - PRESSING
1. Lift the Pressing Handle (A). The Pressing Plate (B) moves to the up
position.
2. Carefully arrange the garment to be pressed onto the Ironing Board (C).
3. Grab the handle of the Pressing Plate(A) and lower it onto the Ironing
Board (C), capturing the garment between the two halves of the Steam
Press. For light duty Pressing, simply lowering the handle and allowing the
Pressing Plate to rest on the Ironing Board will be sufficient. Return to the
open position. For heavier duty pressing, continue to grab the handle and
press downward until the Pressing Plate is pushed to its lowest position,
then open the press.
4. If the temperature is set high enough you may give the fabric a burst of
steam by pressing the Steam Burst Button (D) to remove stubborn wrinkles.
Lower the pressing plate until it is about two inches from the garment.
Press the Steam Burst Button for about 3-5 seconds. After releasing the
Steam Burst Button you may fully lower the pressing plate.
NOTE: Do not press the Steam Burst Button when the pressure plate is
in its lowest (closed) position.
5. After a few seconds, lift the handle and raise the Pressing Plate back to the
raised position.
Otros manuales para Empressa S500
1
Tabla de contenidos
Otros manuales de Hierro de Reliable
Reliable
Reliable C81 Manual de usuario
Reliable
Reliable 526HA Manual de usuario
Reliable
Reliable Longboard C55LB Manual de usuario
Reliable
Reliable THE BOARD 100IB Manual de usuario
Reliable
Reliable C81 Manual de usuario
Reliable
Reliable 3000IS Manual de usuario
Reliable
Reliable Velocity V95 Manual de usuario
Reliable
Reliable 424HAB Manual de usuario
Reliable
Reliable 2300IR Manual de usuario
Reliable
Reliable ARIA 350SP Manual de usuario
Reliable
Reliable Velocity V50 Manual de usuario
Reliable
Reliable i300 Manual de usuario
Reliable
Reliable The Board C60 Manual de usuario
Reliable
Reliable 5000 SERIES Manual de usuario
Reliable
Reliable i700 Manual de usuario
Reliable
Reliable Pantman F1 Manual de usuario
Reliable
Reliable I500A Manual de usuario
Reliable
Reliable i30 Manual de usuario
Reliable
Reliable Pantman F1 Manual de usuario
Reliable
Reliable C88 Manual de usuario
