Reed Instruments R9260 Manual de usuario

Radiation

Dose

Meter

Instruction

Manual

R9260

1 YEAR

1 AN

White background

Transparentbackground

White

Black

1 YEAR1AN

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

Table of Contents

Introduction ................................................................................................ 3

Product Quality........................................................................................... 3

Safety ......................................................................................................... 3

Features...................................................................................................... 3

Included...................................................................................................... 4

Specications............................................................................................. 4

Instrument Description............................................................................... 5

Display Description .................................................................................... 5

Operating Instructions...........................................................................6-11

How the Meter Detects Radiation ...................................................... 6

Power ON/OFF................................................................................... 6

Measurement Interface Screen .......................................................... 6

Setup Mode...................................................................................7-11

Measurement Interface Screen (Measure) .................................. 7

Set Delayed Start/Measurement Time (Schedule) ...................7-8

View the Recorded Logs............................................................. 8

Delete the Recorded Data........................................................... 8

Set Alarm Values......................................................................... 9

Select Unit of Measure................................................................ 9

Set Alarm Frequency and Volume..........................................9-10

Set the Date and time ............................................................... 10

Set Auto Power Off/Sleep Settings and Screen Brightness ....... 11

Charging the Battery ................................................................................ 12

Applications.............................................................................................. 12

Accessories and Replacement Parts ....................................................... 12

Product Care ............................................................................................ 12

Product Warranty ..................................................................................... 13

Product Disposal and Recycling .............................................................. 13

Product Support....................................................................................... 13

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

Introduction

Thank you for purchasing your REED R9260 Radiation Dose Meter.

Please read the following instructions carefully before using your

instrument. By following the steps outlined in this manual your meter will

provide years of reliable service.

Product Quality

This product has been manufactured in an ISO9001 facility and has been

calibrated during the manufacturing process to meet the stated

product specications.

Safety

• Do not leave the meter in temperatures over 100°F (38°C) or in direct

sunlight for an extended period of time.

• This meter may be sensitive to and may not operate properly in radio

frequency, microwave, electrostatic, and electromagnetic elds.

• Never attempt to repair or modify the instrument. Dismantling the

product, other than for the purpose of replacing batteries, may cause

damage that will not be covered under the manufacturer's warranty.

Servicing should only be provided by an authorized service center.

Features

• Detects Beta, Gamma, and X radiation

• Measures dose rate in real-time and records total doses

• Automatic selection of measurement range

• User-adjustable alarms (audio/visual indicators)

• Internal memory stores up to 10 groups of data internally

• Auto shut-off and low battery indicator

continued...

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

Included

• Radiation Dose Meter

• USB Cable

• Lanyard

• Carrying Case

Specifications

Sensor Type: G-M Counter Tube

Measured Rays: Beta, Gamma, X

Radiation Dose Range: 0.05uSv to 50mSv

Accumulated Radiation Dose Value: 0.1µSv to 9999mSv

Accuracy: ≤25%

Energy Range: 80keV to 1.5MeV

Source: Cs-137

Response Time: ≤10 seconds

Display: 2" Color TFT LCD Display

Backlit Display: Yes

Adjustable Alarms: Yes (Audible/Visual Indicators)

Natural Environment Reading: 0 to 0.2µSv/h

Datalogging Capabilities: Yes

Real-Time Clock and Date Stamp: Yes

Internal Memory: Yes (up to 10 groups of data)

Power Supply: Built-in lithium battery

(3.7V 1800mAh)

Battery life: Approx. 20 days (Fully Charged)

Product Certications: CE, UKCA, RoHS

Operating Temperature: 32 to 104°F (0 to 40°C)

Operating Humidity Range: 20 to 80%

Storage Temperature: 14 to 122°F (-10 to 50°C)

Storage Humidity Range: 20 to 70%

Dimensions: 4.7 x 2.6 x 1.0" (120 x 65 x 25mm)

Weight: 4.48oz (127g)

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

Instrument Description

1. LCD Display

2. Geiger-Mueller Tube Screens

3. Power/Select Button

4. Right/Add Button

5. Left/Subtract Button

Display Description

1. Battery Status Indicator

2. Date and Time Stamp

3. Real-Time Dose Rate

Measurement Value

4. Average Dose Rate

Measurement Value

5. Total Dose

Measurement Value

R9260

Radiation Dose Meter

23-03-10

Real-time Dose Rate(uSv/h)

Average Dose Rate(uSv/h)

Total Dose 000:02:40 (uSv)

13:52:54

1 2

23-03-10

Real-time Dose Rate(uSv/h)

Average Dose Rate(uSv/h)

Total Dose 000:02:40 (uSv)

13:52:54

R9260

Radiation Dose Meter

23-03-10

Real-time Dose Rate(uSv/h)

Average Dose Rate(uSv/h)

Total Dose 000:02:40 (uSv)

13:52:54

1 2

23-03-10

Real-time Dose Rate(uSv/h)

Average Dose Rate(uSv/h)

Total Dose 000:02:40 (uSv)

13:52:54

continued...

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

Operating Instructions

The R9260 is intended to detect the radiation dose rate of

and X-rays radiated from an object and not the physical quantit

describing the radioactivity of an object/area.

How the Meter Detects Radiation

The meter uses a Geiger-Mueller counter tube to detect radiation. The

Geiger tube generates a pulse of electrical current each time radiation

passes through the halogen quenched tube. Each pulse is electronically

detected and registers as a count. The unit displays the counts in the

selected mode.

The number of counts detected by the unit varies from moment to

moment due to the random nature of radioactivity. A reading is expressed

more accurately as an average over time, and the average is more

accurate over a longer time period.

Power ON/OFF

To turn the meter ON or OFF, press and hold the

button for

approximately 3 seconds.

Measurement Interface Screen

When the meter is powered on, the measurement interface screen

automatically appears which displays the real-time dose rate

(0.05uSv-50mSv), average dose rate (0.05uSv-50mSv) and total dose

(0.1uSv-9999mSv) of the test source/area.

continued...

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

Setup Mode

1. While in the measurement interface screen, press the button to

enter Setup Mode.

2. Use the or buttons to scroll through the following parameters:

Parameter Description

Measure Measurement Interface Screen

Schedule Set delayed start/measurement times

Records View recorded logs

Delete Delete recorded data

Alarm Set alarm values

Unit Select unit of measure

Sound Set alarm frequency and volume

Clock Set the date and time

Sleep Set auto power off, sleep settings and screen brightness

3. Once the appropriate parameter has been selected, follow the

instructions below.

Measurement Interface Screen (Measure)

Press the button when "Measure" is highlighted to return to the

measurement interface screen.

Set Delayed Start/Measurement Time (Schedule)

1. Press the

button when "Schedule" is highlighted to set the delayed

start/measurement times.

2. While in this mode, press the or buttons to toggle through the

adjustable parameters for "Start Delay" and "Measurement Time".

3. Press the button to activate the desired parameter

(i.e. Hour/Minute/Second).

4. Press the and buttons to adjust the applicable value.

continued...

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

5. Press the button to conrm selection and move on to the next

parameter, if required.

6. Once all parameters have been adjusted, select "Start Timing" and

press the button.

7. Press the button to conrm the scheduled delayed start/

measurement times or press the button to cancel, when the "Yes" or

"No" dialog box appears.

Note: The test will not start until the programmed delayed time has

elapsed (if applicable).

8. At any time, select "stop timing" to the end and press the button to

manually stop the measurement time.

9. When done, select "Return" and press the button to exit the

"Setting the Delayed Start/Measurement Times" screen and return to

the setup mode screen.

View the Recorded Logs

Press the button when "Records" is highlighted to view the

recorded logs.

2. Press the and buttons to scroll through the list of recorded log

les (if applicable).

3. Press the button to exit the "Viewing the Recorded Logs" screen

and return to the setup mode screen.

Delete the Recorded Data

1. Press the button when "Delete" is highlighted to delete any

stored data.

2. Press the and buttons to select between "Delete Current Data"

and "Delete History Data".

3. Press the button to activate the desired parameter.

4. Press the button to conrm deletion or press the button to cancel,

when the "Yes" or "No" dialog box appears.

5. When done, select "Return" and press the button to exit the

"Deleting the Recorded Data" screen recording time screen and return

to the setup mode screen. continued...

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

Set Alarm Values

1. Press the button when "Alarm" is highlighted to set the alarm values.

2. While in this mode, press the or buttons to toggle through the

adjustable parameters for "Dose Rate" and "Total Dose".

3. Press the button to activate the desired parameter.

4. Press the and buttons to adjust the applicable value within the

meters limit range.

5. Press the button to conrm selection and move on to the next

parameter if required.

6. When done, select "Return" and press the button to exit the

"Setting Alarm Values" screen and return to the setup mode screen.

Select Unit of Measure

1. Press the button when "Unit" is highlighted to set the

measurement unit.

2. While in this mode, press the or buttons to toggle to the

adjustable parameter for "Unit".

3. Press the button to activate the desired parameter.

4. Press the and buttons to toggle between the applicable

measurement unit.

5. Press the button to conrm selection and move on to the next

parameter if required.

When done, select "Return" and press the button to exit the

"Selecting Unit of Measure" screen and return to the setup mode screen.

Set Alarm Frequency and Volume

1. Press the button when "Sound" is highlighted to set the alarm

frequency and volume.

2. While in this mode, press the or buttons to toggle through the

adjustable parameters for "Alarm Volume", "Alarm Times" and

"Particle Sounds".

3. Press the button to activate the desired parameter.

continued...

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

4. For alarm volume, press the or buttons to toggle up and down

the alarm volume range between 0 and 9.

5. Press the button to conrm selection and move on to the next

parameter if required.

6. For alarm frequency, press the or buttons to toggle up and down

the frequency range between 1 and 10.

7. Press the button to conrm selection and move on to the next

parameter if required.

8. For particle sounds, press the or buttons to toggle between

ON or OFF.

9. Press the button to conrm selection.

10. When done, select "Return" and press the button to exit the

"Setting Alarm Frequency and Volume" screen and return to the setup

mode screen.

Set the Date and time

1. Press the button when "Clock" is highlighted to set the delayed

start/measurement times.

2. While in this mode, press the or buttons to toggle through the

adjustable parameters for "Date" and "Time".

3. Press the button to activate the desired parameter

(i.e. Year/Month/Day/Hour/Minute/Second).

4. Press the and buttons to adjust the applicable value.

5. Press the button to conrm selection and move on to the next

parameter if required.

6. When done, select "Return" and press the button to exit

the "Setting the Date and Time" screen and return to the

setup mode screen.

continued...

REED Instruments

1-877-849-2127 | [email protected] | www.reedinstruments.com

Tabla de contenidos

Otros manuales de Instrumento de medición de Reed Instruments

Reed Instruments

Reed Instruments Smart Series Manual de usuario

Reed Instruments

Reed Instruments SMART Series Manual de usuario

Reed Instruments

Reed Instruments R8180 Manual de usuario

Reed Instruments

Reed Instruments R8008 Manual de usuario

Reed Instruments

Reed Instruments R7900 Manual de usuario

Reed Instruments

Reed Instruments R1620 Manual de usuario

Reed Instruments

Reed Instruments R6013 Manual de usuario

Reed Instruments

Reed Instruments SL-417 Manual de usuario

Reed Instruments

Reed Instruments LM-81HT Manual de usuario

Reed Instruments

Reed Instruments R3530 Manual de usuario

Reed Instruments

Reed Instruments R8080 Manual de usuario

Reed Instruments

Reed Instruments R9920 Manual de usuario

Reed Instruments

Reed Instruments LM-8000 Manual de usuario

Reed Instruments

Reed Instruments R4700SD Manual de usuario

Reed Instruments

Reed Instruments R6000 Manual de usuario

Reed Instruments

Reed Instruments R9400 Manual de usuario

Reed Instruments

Reed Instruments R7920 Manual de usuario

Reed Instruments

Reed Instruments R5090 Manual de usuario

Reed Instruments

Reed Instruments R9905 Manual de usuario

Reed Instruments

Reed Instruments SD-4023 Manual de usuario

Reed Instruments

Reed Instruments Smart Series Manual de usuario

Reed Instruments

Reed Instruments R7150 Manual de usuario

Reed Instruments

Reed Instruments R5065 Manual de usuario

Reed Instruments

Reed Instruments R8130 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario