REDZ BSB Series Manual de usuario
BSB Series Industrial Unmanaged EthernetBSB Series Industrial Unmanaged Ethernet
Switch with 10/100Base-T(x) Ports and/orSwitch with 10/100Base-T(x) Ports and/or
BPL ( Broadband Power Line Link) UserBPL ( Broadband Power Line Link) User
ManualManual
1. About BSB Series Industrial Unmanaged Ethernet Switch1. About BSB Series Industrial Unmanaged Ethernet Switch
BSB Series Industrial Unmanaged Ethernet Switches are designed for industrial-grade Ethernet, and
particularly for facilities of rugged industry and infrastructure. BSB Series Industrial Unmanaged Ethernet
Switches are tailored to perform various features, such as wide temperature, wide range power input
range... etc. Thus, BSB Series Industrial Unmanaged Ethernet Switches are the best choice for facility
management, sewage treatment, power utility, telecommunication, transportation and all other
applications that require reliable Ethernet connectivity.
BSB Series has models also with REDZ Broadband Power Line (BPL) communication. BPL link allows device
to communicate with full transparent TCP/IP standard over Low Voltage power lines and allows easy
connection between TCP/IP based terminals without use of extra cables.
2. Hardware Features2. Hardware Features
BSB Series Industrial Unmanaged Ethernet Switches has the versions with and without BPL (Broadband
Power Line) Link.
2.1 Features2.1 Features
Supports up to 8 x 10/100Base-T(X) ports
AC or DC wide range power options
Supports Full/Half-Duplex, auto MDI/MDI-X on each port
Wide operating temperature range from -25 to 70 °C AC and -40 to 85 °C DC power input versions
Rugged Metal IP-40 housing design
DIN-Rail mounting
2.2 Extra Features for Models with BPL2.2 Extra Features for Models with BPL
Supports up to 7 x 10/100Base-T(X) ports + 1 x BPL link
Wide range 3 phase AC input
Supports up to 30Mbps PHY rate on BPL with Up to 10 hops and 1000 nodes
Up to 432 sub-carriers from 2 to 28MHz analog bandwidth
Support LDPC-C FEC with 128-bit AES core
Plug and play with Master/Slave selection via switch
3. Installation3. Installation
Each switch has a Din-Rail kit on rear panel. The Din-Rail kit helps switch to fix on the Din-Rail. Slant the
switch and mount the metal spring to Din-Rail.
Then Push the switch toward the Din-Rail until you heard a “click” sound.
4. Front Panel Description4. Front Panel Description
4.14.1 BSB115 & BSB215BSB115 & BSB215
1. 10/100Base-T(X) Ethernet ports 1, 2, 3 and 4.
2. ETHERNET Activity LEDs for port 1, 2, 3 and 4. Blinks during ethernet activity.
3. 10/100Base-T(X) Ethernet port 5.
4. ETHERNET Activity LED for port 5. Blinks during ethernet activity.
4.24.2 BSB118 & BSB218BSB118 & BSB218
1. 10/100Base-T(X) Ethernet ports 1, 2, 3 and 4.
2. ETHERNET Activity LEDs for port 1, 2, 3 and 4. Blinks during ethernet activity.
3. ETHERNET Activity LEDs for port 5, 6, 7 and 8. Blinks during ethernet activity.
4. 10/100Base-T(X) Ethernet ports 5, 6, 7 and 8.
4.34.3 BSB612BSB612
1. 10/100Base-T(X) Ethernet port.
2. BPL Activity LED. Blinks during BPL & Ethernet activity.
3. BPL Link LED. LED Turns ON if the link can be established.
4. Master Indication LED. LED Turns ON if the device is started as “Master” device.
5. Switch position to select the device as “Master” or “Slave”. Device must be repowered after
changing the setting to take into effect.
4.44.4 BSB615BSB615
1. 10/100Base-T(X) Ethernet ports 1, 2, 3 and 4.
2. ETHERNET Activity LEDs for port 1, 2, 3 and 4. Blinks during ethernet activity
3. BPL Activity LED. Blinks during BPL & Ethernet activity
4. BPL Link LED. LED Turns ON if the link can be established.
5. Master Indication LED. LED Turns ON if the device is started as “Master” device.
6. Switch position to select the device as “Master” or “Slave”. Device must be repowered after
changing the setting to take into effect.
4.54.5 BSB618 BSB618
1. 10/100Base-T(X) Ethernet ports 1, 2, 3 and 4.
2. ETHERNET Activity LEDs for port 1, 2, 3 and 4. Blinks during ethernet activity.
3. ETHERNET Activity LEDs for port 5, 6, and 7. Blinks during ethernet activity.
4. 10/100Base-T(X) Ethernet ports 5, 6, and 7.
5. BPL Activity LED. Blinks during BPL & Ethernet activity.
6. BPL Link LED. LED Turns ON if the link can be established.
7. Master Indication LED. LED Turns ON if the device is started as “Master” device.
8. Switch position to select the device as “Master” or “Slave”. Device must be repowered after
changing the setting to take into effect.
5. Top Panel Description5. Top Panel Description
5.1 BSB115 & BSB1185.1 BSB115 & BSB118
1. Power Input DC: 5-60V DC. Polarity protected so that the power input can be connected in any
direction.
2. Power LED: Turns ON when there is power in device.
3. Reset Button: Reset the device.
5.2 BSB215 & BSB2185.2 BSB215 & BSB218
1. Power Input AC: 90 - 265V AC (100 – 370V DC), 47Hz to 63Hz AC input.
2. Power LED: Turns ON when there is power in device.
3. Reset Button: Reset the device.
5.3 BSB612 & BSB615 & BSB6185.3 BSB612 & BSB615 & BSB618
1. Power Input AC: 3 phase input, 110V–240V/50-60Hz. It is also ok to connect only single phase to
the device such as L1-N connection only.
AC Power supply use L1-N only. Phase 2-3 connections are used to BPL signal transmission.
2. Power LED: Turns ON when there is power in device.
6. Ethernet Cables6. Ethernet Cables
BSB Series Industrial Unmanaged Ethernet Switches have standard Ethernet ports. According to the link
type, the switches use CAT 3, 4, 5, 5e UTP cables to connect to any other network device (PCs, servers,
switches, routers, or hubs).
6.1 Cable Type and Specifications6.1 Cable Type and Specifications
CableCable TypeType Max. LengthMax. Length ConnectorConnector
10BASE-T Cat. 3, 4, 5 100-ohm UTP 100 m (328 ft) RJ-45
100BASE-TX Cat. 5 100-ohm UTP UTP 100 m (328 ft) RJ-45
Otros manuales para BSB Series
1
Este manual sirve para los siguientes modelos
7
Tabla de contenidos
Otros manuales de Cambiar de REDZ
