Safety Information & Precautions
• Install the AWG on a flat surface to minimize vibration and/or
noise.
• Inspect the power cord before use. Never operate the AWG
when the power cord or plug is damaged.
• Do not insert or unplug the power cord with wet hands.
• Do not share the electrical outlet with other appliances.
• Always use replacement and maintenance parts supplied by
Real Spirit USA/H2O Machine. Failure to do so will void the
warranty.
• Insert the three-prong plug on the power cord into a matching
electrically grounded outlet (110-120V/60 Hz, 15A at least).
• Never cut off the third prong. Do not modify the power cord
length.
• Do not operate the AWG in standing water. Keep motor and
wiring dry.
• Never immerse the AWG into water or other liquids.
• Do not put the AWG close to heat-generating devices, including
flammable or dangerous materials.
• Unplug the power supply before cleaning or storing the AWG.
Always grasp the plug (not the cord) to unplug.
• Do not put fingers or other items into the air inlet or air outlet.
• Never insert any other objects into the AWG body.
• Do not sit, stand or put heavy objects on the AWG.
• Make sure to turn off and unplug the AWG before cleaning.
• Keep the AWG away from any toxic gases or liquids.
• Disconnect the power if strange sounds, odors, or smoke come
from the AWG.
• Do not operate or turn off the AWG by plugging in or unplugging
the AWG, use the power switch instead.
• This AWG should only be used by adults who have read the
manual and understand the operating procedure of the AWG.
To prevent injury and property damage, the following
instructions must be followed when using the
Atmospheric Water Generator (AWG).
1
