Razer Thresher Ultimatefor Xbox One Guía de instalación
FAQ Sheet
Common Questions
How long does it take to charge the Razer Thresher Ultimate for Xbox One?
It takes four hours to completely charge your Razer Thresher Ultimate.
Are my Razer Thresher Ultimate and audio hub pre-paired?
Yes. They are pre-paired out-of-box for your convenience to use them right away.
Simply turn on both devices and they will be connected automatically.
What is the audio system used by the Razer Thresher Ultimate for Xbox One?
It uses the Dolby Digital headphone with 7.1 Surround Sound for a truly immersive gaming
experience.
Can I charge my Razer Thresher headset while playing games?
Yes. You can utilize the charging USB port at the back of the base station to charge your headset
for non-stop gaming action.
Can I use my Razer Thresher Ultimate headset on my desktop or laptop
computer?
Yes. You can flip the switch at the back of the base station from Xbox One or PS4 to PC and
plug in the USB cable to your computer. No driver installation action required.
What are the audio drivers or speakers used in the Razer Thresher headsets?
The Razer Thresher headsets feature 50 mm drivers or speakers with Neodymium magnets for
maximum audio quality.
Are the Razer Thresher headsets supported by Razer Chroma?
No, the Razer Thresher headsets are not supported by Razer Chroma.
Are the mics for the Razer Thresher headsets retractable?
Yes, the Thresher headsets are equipped with retractable boom mics that are conveniently stowed
in the earcups.
What is the material used in the ear cushion for the Razer Thresher headsets?
The Razer Thresher headsets' ear cushions have lightweight memory foam-lined with leatherette
for maximum comfort during long hours of gaming.
Does the Razer Thresher Ultimate for Xbox One come with a USB Dongle?
No, the Razer Thresher Ultimate for PS4 and Xbox One instead come with the convenient base
station that serves as the wireless receiver and headset stand.
How do I enable or disable the Dolby® Surround Sound on the Razer Thresher
Ultimate for Xbox One?
Press the Dolby® Headphone button to turn on/off the virtual surround sound environment on
the Thresher Ultimate.
Troubleshooting
Why is my Razer Thresher Ultimate for Xbox One headset not connecting with
the audio hub even though the LED is blinking?
You may have pressed the “ON” button for too long which causes the headset or audio hub to go
into pairing mode. Simply follow the steps outlined below:
1. Turn off the power of both the headset and audio hub.
2. Press the audio hub power button to turn it on again. The LED indicator will start to blink slowly.
3. Turn on the headset and let go of the power button when you hear the ON tone, the LED
indicator is lit, or when the Razer logo starts blinking slowly.
4. Once the two devices are successfully connected, the LED lights of the headset and audio hub
will become steady.
How do I replace the damaged or worn out earcups on my Razer Headset?
If your headset is still in warranty, you may contact customer support to have your earcups
replaced. Kindly prepare a photo of the earcups for documentation.
However, do note that earcups that show normal wear from extended use cannot be replaced
under warranty. This also applies to earcups that show signs of excessive dirt, liquid spills,
physical damage or other abuse.
If your headset is no longer covered by our warranty period, you may purchase replacement
earcups.
How do I clean my Razer Thresher Ultimate for Xbox One headset?
We cannot say with certainty what type of dirt and debris may be on your product, or how
certain cleaning products may react with it, but we have had good results cleaning Razer
products using commonly available monitor cleaning wipes. To clean the body of your Razer
headset please take a monitor wipe and use gentle wiping motions. Do not scrub the surface of
your Razer headset.
When cleaning the earpads on your headset, take extra care to not get any liquids inside the
earcup and onto the speaker itself, as this may damage your headset.
Why is there no audio coming from my Razer Thresher Ultimate for Xbox One
headset even though the headset and transmitter are already connected?
Check if your headset if it's properly paired to your audio hub. Also, please make sure that the
optical cable is correctly plugged in from the optical input on the audio hub to the optical output
of your console device.
If everything is properly connected, check if the sound settings are configured correctly by
following the steps below:
1. Go to All Settings > Display & Sound > Audio Output
2. Under Optical Audio, select "Bitstream Out".
3. Under Bitstream Format, select "Dolby Digital".
4. Under Headset Format, select "Stereo Uncompressed".
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Auriculares de Razer
Razer
Razer BlackShark V2 X Manual de usuario
Razer
Razer Banshee StarCraft II Manual de uso y cuidado
Razer
Razer BLACKSHARK V2 Manual de usuario
Razer
Razer RZ04-0348 Manual de usuario
Razer
Razer TIAMAT 7.1 Manual de uso y cuidado
Razer
Razer KRAKEN Pro Manual de usuario
Razer
Razer RC30-015902 Manual de usuario
Razer
Razer KRAKEN V3 PRO Manual de usuario
Razer
Razer Chimaera 5.1 Manual de uso y cuidado
Razer
Razer BLACKSHARK V2 PRO 2023 Manual de uso y cuidado
Razer
Razer RZ04-0347 Manual de usuario
Razer
Razer RZ04-0352 Manual de usuario
Razer
Razer NARI Guía de instalación
Razer
Razer RZ04-024901 Manual de usuario
Razer
Razer KAIRA PRO HYPERSPEED Manual de uso y cuidado
Razer
Razer RZ04-0376 Manual de usuario
Razer
Razer CHIMAERA Manual de uso y cuidado
Razer
Razer RZ04-0343 Manual de usuario
Razer
Razer BlackShark V2 HyperSpeed Manual de uso y cuidado
Razer
Razer KRAKEN V3 X Manual de usuario
