Raven SmarTrax Manual de usuario
Supplement & Installation Manual
Ford NH 9280
W/O High Flow
DISCLAIMER
While every effort has been made to ensure the accuracy of this document, Raven
Industries assumes no responsibility for omissions and errors. Neither is any liability
assumed for damages resulting from the use of information contained herein.
Raven Industries shall not be held responsible or liable for the effects of atmospheric
conditions and sunspot activity on the performance of our products.
Raven Industries cannot guarantee the accuracy, integrity, continuity, or availability of
the GPS signal from the US Department of Defense/NAVSTAR GPS satellites, the
OmniSTAR correction service or the WAAS correction service.
Raven Industries accepts no responsibility for the use of the signal for other than the
stated purpose. Raven Industries shall not be responsible or liable for incidental or
consequential damages or a loss of anticipated benefits or profits, work stoppage or
loss or impairment of data arising out of the use or inability to use the Smartrax or any
of its components.
Manual # 016-0190-046
1
CHAPTER
I
NTRODUCTION
Congratulations on your purchase of the Raven SmarTrax system! This system is
designed to provide cutting-edge, hands-free steering of your machine via GPS
coordinates.
Ford NH 9280 W/O High Flow SmarTrax Supplement & Installation Manual
2
Basic Kit
Contents
Below you will see the kit contents that you should have received with this
SmarTrax kit.
Miller MD SmarTrax Kit Contents
Quantity Item Description Part Number
1 Kit, S.P.S. 063-0181-003
1 Weldment, Brkt, Universal Hyd. Mount-
ing, Part “A” 116-0159-527
1 Hose, Hyd., 3/4” JIC (F) to 1 1/16” JIC
(F), 42” 214-1000-208
1 Hose, Hyd., 3/4” JIC (F) to 1 1/16” JIC
(F), 24” 214-1000-209
1 Hose, Hyd., 9/16” JIC (F) to 3/4” JIC (F),
48” 214-1000-210
2 Hose, Hyd., 9/16” JIC (F) to 7/8” JIC (F),
36” 214-1000-211
1 Switch, Pres., Micro, HD, 15-100 Bar
Adj., w/90° fitting 422-0000-074
1 Valve, Hyd., Open Center, PWM 334-0003-064
2 Ftg., Elbow, 45° Swivel, 9/16” JIC M/F 333-0012-027
3 Ftg., Elbow, 90° Swivel, 3/4” JIC M/F 333-0012-064
1 Ftg., Elbow, 90° Swivel, 1 1/16” JIC M/F 333-0012-099
2 Ftg., Elbow, 90° Swivel, 7/8” JIC M/F 333-0012-108
2 Ftg., Adapter, Swivel Run Tee, 7/8” JIC
M/M/F 333-0012-113
2 Ftg., Reducer, 1 5/16” JIC (F) to 1 1/16”
JIC (M) 333-0012-116
1 Ftg., Adapter, Swivel Run Tee, 1 5/16”
JIC M/M/F 333-0012-117
4 Bolt, 5/16-18 x 7/8” Hex 311-0052-104
4 Bolt, Hex, 3/8”-16 UNC x 1” 311-0054-105
4 Nut, 3/8-16 312-1001-037
4 Washer, Lock, 5/16” 313-1000-019
Manual # 016-0190-046
3
4 Washer, Lock, Split, 3/8” 313-1000-022
4 Washer, Flat, 3/8” 313-2300-013
1 Manual, Installation 016-0190-046
1 Manual, Installation, Smartrax 016-9001-008
1 Label, Warning, Do Not Step 041-0159-688
1 Label, Warning, Tampering 041-0159-689
1 Cable, Hydraulic Solenoid/Override 115-0171-466
Quantity Item Description Part Number
Ford NH 9280 W/O High Flow SmarTrax Supplement & Installation Manual
4
Notes:
Manual # 016-0190-046
5
CHAPTER
S
AFETY
Hydraulic
Safety
Precautions
When disconnecting the hydraulic hoses or when purging is required, be aware
that the hydraulic oil within the machine system may be extremely hot and under
high pressure. Caution must be exercised. Any work carried out on the hydraulic
system must be performed in accordance with the machine manufacturer’s
approved maintenance instructions. Raven Industries recommends that
appropriate protective equipment be worn when working on the hydraulic system.
Objects or materials that are able to bypass the machine’s hydraulic filtration
system will adversely reduce performance and possibly damage the hydraulic
valves.
ElectricalSafety
Precautions
Do not reverse the power leads. Doing so will cause severe damage to the
equipment. Always check to make sure that the power leads are connected to the
right polarity as marked. Ensure that the power cable is the last cable to be
connected.
Important: Hydraulics are under pressure. Never attempt to
open or work on a hydraulic system with the
equipment running. Care should always be taken when first
opening a system that was previously pressurized.
Ford NH 9280 W/O High Flow SmarTrax Supplement & Installation Manual
6
Contacting
Raven
Industries
We welcome your feedback about this manual. If you have any comments or
suggestions for improvement, please let us know by contacting our Customer
Support Center by any of the following methods:
•Via phone: 1-800-243-5435
•Via mail:
Raven Industries
Flow Control Division
205 E. 6th St.
Sioux Falls, SD 57104
•Via email: fcdinfo@ravenind.com
Manual # 016-0190-046
7
CHAPTER
M
OUNTING
THE
U
NIVERSAL
B
RACKET
AND
V
ALVE
Position the bracket on the steel hood support plate between the engine and the
front of the cab. Drill holes to fit the mounting bracket pattern and attach the uni-
versal mounting bracket to the machine using the provided 1/2” hex-head bolts.
Figure above shows the bracket mounted to the machine with the valve and hoses
attached.
Ford NH 9280 W/O High Flow SmarTrax Supplement & Installation Manual
8
Position the hydraulic valve on the universal bracket over the top of the proper
hole pattern. Secure the valve to the bracket using the provided metric bolts and
lock washers.
Attach the pressure switch to the PS-port on the Steering Assist valve using the
provided JIC fittings.
Note: Prior to attaching the steering assist valve to the mount-
ing bracket, remove the existing T-port fitting and install the
provided larger fitting..
Note: It may be necessary to drill additional holes in the
mounting bracket if the valve is not in an accessible position.
Otros manuales para SmarTrax
79
Otros manuales de Accesorios para tractores de Raven
Raven
Raven SmarTrax Steering Kit Manual de usuario
Raven
Raven AccuBoom Manual de usuario
Raven
Raven AccuBoom Manual de usuario
Raven
Raven SmarTrax Manual de usuario
Raven
Raven RS1 Manual de usuario
Raven
Raven SmarTrax Manual de usuario
Raven
Raven SC1 Manual de usuario
Raven
Raven SmarTrax MD Manual de uso y cuidado
Raven
Raven AutoBoom Rogator 54 Series 1997+ Manual de usuario
Raven
Raven SmarTrax Manual de usuario
Raven
Raven SmarTrax Manual de usuario
Raven
Raven TC1 Manual de usuario
Raven
Raven AutoBoom XRT Manual de usuario
Raven
Raven AutoBoom Manual de usuario
Raven
Raven SBGuidance Auto Manual de usuario
Raven
Raven SmarTrax Manual de usuario
Raven
Raven SmarTrax MD Manual de usuario
Raven
Raven TC1 Manual de usuario
Raven
Raven ICD Sidekick Pro Manual de usuario
Raven
Raven VSN Manual de usuario
