Rauch QUANTRON Manual de usuario

QUANTRON-A

Complementary instructions

AXIS/MDS

Please read carefully

before using the

machine!

Keep for future use

This operator's and assembly manual is

an integral part of the machine. Suppliers

of new and second-hand machines are

required to document in writing that the

operator's and assembly manual was

delivered with the machine and handed

over to the customer. Version 3.52.00

5902662-h-en-1021

Original instructions

Dear customer,

By purchasing the QUANTRON-A control unit for the AXIS and MDS fertilizer spreader, you have

shown confidence in our product. Thank you very much! We want to justify this confidence. You

have purchased a powerful and reliable machine control unit.

However, in case unexpected problems arise, our customer service department is always there for

you.

Please read this operator's manual as well as the operator’s manual for the machine

carefully before using the machine, and follow the advice given.

This manual may also describe equipment that is not included in your control unit.

Note the serial number of the control unit and of the machine

The control unit QUANTRON-A has been calibrated at the factory for the mineral

fertilizer spreader with which it was supplied.. It cannot be connected to another

machine without new calibration.

Please enter the serial number of the machine control unit and of the machine

here. When connecting the machine control unit to the machine, these numbers

must be checked.

• Serial number of control unit:

• Serial number and year of manufacture of the machine:

Technical improvements

We continuously strive to improve our products. For this reason, we reserve the right to make any

improvements and changes to our machine that we consider necessary without notice. We do not

accept any obligation to make such improvements or changes on machines that have already been

sold.

We will be pleased to answer any other questions that you might have.

Yours sincerely

RAUCH Landmaschinenfabrik GmbH

Table of contents

1 User instructions 6

1.1 About this operator’s manual 6

1.2 Meaning of warnings 6

1.3 Notes on text descriptions 7

1.3.1 Instructions and procedures 7

1.3.2 Lists 7

1.3.3 Menu hierarchy, keys and navigation 7

2 Layout and function 9

2.1 Overview of supported machines 9

2.2 Layout of the control unit 11

2.3 Control elements 12

2.4 Display 14

2.4.1 Description of the operating screen 14

2.4.2 Display of the metering slide status 17

2.4.3 Display of sections 18

2.5 Library of icons used 19

2.5.1 Operating screen icons 19

2.6 Structural menu overview 20

2.7 WIFI module 23

3 Attachment and installation 24

3.1 Tractor requirements 24

3.2 Connections, sockets 24

3.2.1 Power supply 24

3.2.2 Forward speed signal 25

3.3 Connect control unit 25

3.3.1 Overview of connections to tractor 26

3.3.2 Overwiew of connections to machine 28

3.4 Metering slide preparation 32

4 Operation 33

4.1 Switching on the machine control unit 33

4.2 Navigation within the menus 34

4.3 Weighing/Trip counter 36

4.3.1 Trip counter 36

4.3.2 Display rest quantity 37

4.3.3 Zero scales 39

4.4 Main menu 40

4.5 Fertliser settings in Easy-Mode 41

4.6 Fertiliser settings in Expert-Mode 42

Table of contents

QUANTRON-A AXIS/MDS 5902662 3

4.6.1 Application rate 45

4.6.2 Setting the working width 46

4.6.3 Flow factor 46

4.6.4 Drop point 48

4.6.5 Calibration 49

4.6.6 PTO speed 52

4.6.7 Disc type 53

4.6.8 Boundary spreading quantity 53

4.6.9 Calculate OptiPoint 54

4.6.10 GPS Control info 55

4.6.11 Fertilizer charts 55

4.6.12 Calculate VariSpread 57

4.7 Machine settings 58

4.7.1 Forward speed calibration 59

4.7.2 AUTO/MAN mode 62

4.7.3 +/- quantity 66

4.7.4 Signal idle measurement 66

4.7.5 Easy Toggle 66

4.8 Fast emptying 67

4.9 Field data 69

4.9.1 Selecting a field data file 69

4.9.2 Start the recording 70

4.9.3 Stopping the recording 72

4.9.4 Deleting field data 72

4.10 System/Test 73

4.10.1 Setting the language 74

4.10.2 Display configuration 75

4.10.3 Setting the mode 76

4.10.4 Test/diagnosis 77

4.10.5 Data transmission 80

4.10.6 Total data counter 81

4.10.7 Service 81

4.10.8 Changing the system of units 81

4.11 Info 82

4.12 Operating lights (SpreadLight) 82

4.13 Hopper cover 84

4.14 Special functions 85

4.14.1 Entering text 85

4.14.2 Entering values 87

4.14.3 Creating screenshots 88

5 Spreading operation 90

5.1 TELIMAT border spreading unit 90

5.2 GSE sensor 91

5.3 Working with sections 91

5.3.1 Spreading with reduced sections 91

5.3.2 Spreading operation with one section and in boundary spreading mode 92

Table of contents

45902662 QUANTRON-A AXIS/MDS

5.4 Spreading with the automatic operating mode (AUTO km/h + AUTO kg) 94

5.5 Spreading with the AUTO km/h operating mode 96

5.6 Spreading with the MAN km/h operating mode 97

5.7 Spreading in the MAN scale operating mode 97

5.8 GPS control 98

6 Alarm messages and possible causes 102

6.1 Meaning of the alarm messages 102

6.2 Fault/alarm 106

7 Special equipment 107

8 Guarantee and warranty 109

Table of contents

QUANTRON-A AXIS/MDS 5902662 5

1 User instructions

1.1 About this operator’s manual

This operator’s manual is an integral part of the control unit.

The manual contains important instructions for safe, proper, and economic use and maintenance of

the control unit. Compliance with its stipulations helps to avoid risks, reduce repair costs and

downtime, and to increase the reliability and service life of the machine controlled with it..

The operator's manual must be kept in an easily accessible location close to where the control unit is

used (e.g., in the tractor).

The operator's manual does not replace your own responsibility as operator and operational staff of

the control unit.

1.2 Meaning of warnings

The warnings in the operator’s manual are classified according to the severeness of the risk and the

probability of its occurrence.

The warning symbols draw attention to the unavoidable residual risks inherent in the design to which

users of the machine are exposed. The warnings used are structured as follows:

Symbol + signal word

Explanation

Level of danger of warnings

The level of danger is indicated in the signal word. The levels of danger are classified as follows:

DANGER!

Type and source of danger

This warning warns of a danger posing an immediate threat to the health and life of people.

Ignoring these warnings will result in severe injury or death.

▶Always observe the measures described to prevent this danger.

WARNING!

Type and source of danger

This warning warns of a potentially dangerous situation for personal health.

Ignoring these warnings leads to severe injury.

▶Always observe the measures described to prevent this danger.

1. User instructions

65902662 QUANTRON-A AXIS/MDS

CAUTION!

Type and source of danger

This warning warns of a potentially dangerous situation for personal health.

Ignoring these warnings leads to injury.

▶Always observe the measures described to prevent this danger.

NOTICE!

Type and source of danger

This warning warns of material and environmental damage.

Ignoring these warnings will result in damage to the machine and to the environment.

▶Always observe the measures described to prevent this danger.

This is a note:

General information containing application tips and particularly useful information, but which

constitutes neither warnings nor hazards.

1.3 Notes on text descriptions

1.3.1 Instructions and procedures

Steps that the operator must carry out are shown as follows.

uInstruction for action step 1

uInstruction for action step 2

1.3.2 Lists

Lists without a specific sequence are shown as lists with bullet points:

• Property A

• Property B

1.3.3 Menu hierarchy, keys and navigation

Menus are the entries listed in the main menu window.

The menus list submenus and/or menu items where settings can be made (selection lists, text or

number entries, starting a function).

The hierarchy and the path to the requested menu item are marked with an > (arrow) between menu

and/or menu item(s):

1. User instructions

QUANTRON-A AXIS/MDS 5902662 7

• System/Test > Test/diagnosis > Voltage means that you can reach the Voltage menu item via the

System/Test menu and the Test/diagnosis menu item.

○ The arrow > corresponds to confirmation with the enter key.

1. User instructions

85902662 QUANTRON-A AXIS/MDS

2 Layout and function

2.1 Overview of supported machines

Some models are not available in all countries.

MDS

Supported function

• Spreading depending on forward speed

MDS 8.2 Q MDS 10.1 Q

MDS 14.2 Q MDS 11.1 Q

MDS 18.2 Q MDS 12.1 Q

MDS 20.2 Q MDS 17.1 Q

MDS 19.1 Q

AXIS-M V8

8 section steps

Function

AXIS-M 20 Q V8

AXIS-M 30 Q V8

AXIS-M 40 Q V8

AXIS-M 20 EMC V8

AXIS-M 30 EMC V8

AXIS-M 40 EMC V8

AXIS-M 30 EMC + W V8

AXIS-M 40 EMC + W V8

Spreading depending on forward

speed ● ● ● ● ● ● ● ●

Mass flow control by measuring

the torque of the spreading discs ● ● ● ●

Weigh cells ● ●

2. Layout and function

QUANTRON-A AXIS/MDS 5902662 9

AXIS-M VS pro

Continuous section adjustment (VariSpread pro)

Function

AXIS-M 30 EMC VS pro

AXIS-M 40 EMC VS pro

AXIS-M 30 EMC W VS pro

AXIS-M 40 EMC W VS pro

Spreading depending on forward speed ● ● ● ●

Mass flow control by measuring the torque

of the spreading discs ● ● ● ●

Weigh cells ● ●

2. Layout and function

10 5902662 QUANTRON-A AXIS/MDS

Tabla de contenidos

Otros manuales de Unidad de control de Rauch

Rauch

Rauch EcoTron Manual de usuario

Rauch

Rauch QUANTRON-A Manual de usuario

Rauch

Rauch QUANTRON-K2 Manual de usuario

Rauch

Rauch AERO GT ISOBUS Manual de usuario

Rauch

Rauch Axent Isobus Manual de usuario

Rauch

Rauch AXMAT DUO Manual de usuario

Rauch

Rauch QUANTRON-A AXIS-M 20 Q Manual de usuario

Rauch

Rauch AXIS ISOBUS Manual de usuario

Rauch

Rauch E-CLICK Manual de usuario

Rauch

Rauch QUANTRON-A Manual de usuario

Rauch

Rauch QUANTRON-A Manual de usuario

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario