Ranger design C5-BA13-4 Manual de usuario

INSTALLATION GUIDE

C5-BA13-4 BOTTLE HOLDER

QUICK START GUIDE

REQUIRED ITEMS

PERSONS

q1.1 Setup...............................................................................................................................................

q1.2 Bottle holder Assembly....................................................................................................................

3 - 5

Phase 1 - Assembly

Phase 2 - Installation

9 - 10

11 - 12

13 - 14

q2.1 Attach Wall Brackets To The End Panels........................................................................................

q2.2 Mark Holes For Plus Nuts...............................................................................................................

q2.3 Attach Plus Nuts.............................................................................................................................

q2.4 Attach Bottle holder To The Floor...................................................................................................

q2.5 Attach Wall Brackets......................................................................................................................

qCordless Impact

qCordless Drill

qTape Measure

qMarker

q1/2" Socket

q1/2" Drill Bit w/ Drill Collar ( Set at 1/2" )

q3/8" Driver Bit

qKnife

qPlusnut Tool / Plusnut Gun ( 5/16" )

For technical support, contact us at 1-800-565-5321 C5-BA13-4 Installation Guide |REV. A1 | Page 3

PHASE 1 – ASSEMBLY

1.1 SETUP

1.1.1 Unpack components; compare with the bill of materials.

1.1.2 Verify all parts are present.

Item No. Description Qty.

6098 Strap 4

40 - 715 Bracket Head 4

40 - 716 Bracket Arm 4

40 - 744 End Panel ( Left ) 1

40 - 745 End Panel ( Right ) 1

53 - 611 V Shelf 4

60 - 11.875 × 13 Shelf Tray, Black Plywood 1

94- 5024 Assembly Fastener Kit 1

96 - 5023 Install Fastener Kit 1

BILL OF MATERIALS

40 - 745

6098

60 - 11.875 × 13

40 - 744

40 - 716

40 - 715

53 - 611

For technical support, contact us at 1-800-565-5321 C5-BA13-4 Installation Guide |REV. A1 | Page 4

94 - 5024 Fastener Kit Fastener Assembly

1.1.3 Fastener kits.

Hex Bolt

5/16"-18 × 3/4"

GR-5 ZINC

# 90-204

8×8×

Hex Bolt

5/16"-18 × 1"

GR-5 ZINC

# 90-208

8×8×

Hex Bolt

5/16"-18 × 1/2"

GR-5 ZINC

# 90-200

16×16×

# 94-116

Serrated Nut

5/16"-18

ZINC

32×32×

8×8× # 92-102

Screw HWH

#14 × 1"

ZINC

32×32× # 98-116

Flat Washer

5/16"

ZINC

8×8×

Spacer

0.375" ID, × 1.0" OD × 0.25" LONG

NYLON

# 98-157

#90-200 Hex Bolt 5/16" × 1/2"

#98-116 Flat Washer

#94-116 Serrated Nut

16×16×

#90-204 Hex Bolt 5/16" × 3/4"

#98-116 Flat Washer

#94-116 Serrated Nut

8×8×

#92-102 Screw #14 × 1"

8×8×

#90-208 Hex Bolt 5/16" × 1"

#98-116 Flat Washer

#94-116 Serrated Nut

#98-157 Spacers

For technical support, contact us at 1-800-565-5321 C5-BA13-4 Installation Guide |REV. A1 | Page 5

96 - 5023 Fastener Kit Fastener Assembly

8×8×

#90-212 Hex Bolt 5/16" × 1-1/4"

#98-122 Lock Washer

#98-116 Flat Washer

#94-132 5/16" Plusnut

4×4×

#90-011 Hex Bolt 5/16" × 1-3/4"

#98-122 Lock Washer

#98-116 Flat Washer

#98-157 Spacers

( QTY = Gap beTween floor and end panel )

12×12× Plusnut

# 94-132

4×4×

Spacer

0.375" ID, × 1.0" OD × 0.25" LONG

NYLON

# 98-157

Hex Bolt

5/16"-18 × 1 - 1/4"

GR-5 ZINC

# 90-212

8×8×

Hex Bolt

5/16"-18 × 1-3/4"

GR-5 ZINC

# 90-011

4×4×

# 98-116

Flat Washer

5/16", O.D. 7/8"

ZINC

12×12×

# 98-122

Lock Washer

5/16"

ZINC

12×12×

For technical support, contact us at 1-800-565-5321 C5-BA13-4 Installation Guide |REV. A1 | Page 6

TOOLS

qCordless Impact

q3/8" Driver Bit

TOOLS

qCordless Impact

q1/2" Socket

1.2.1 Attach both panels to the shelf trays.

PHASE 1 – ASSEMBLY

1.2 BOTTLE HOLDER ASSEMBLY

13 - 5/8"

14"

11.875" × 13"

53 - 611

IMPORTANT: Assemble the cabinet on a protected clean surface to avoid scratching.

#92-102 Screw #14 × 1"

HARDWARE USED

8× 94 - 5024

HARDWARE USED

16× 94 - 5024

#90-200 Hex Bolt 5/16" × 1/2"

#98-116 Flat Washer

#94-116 Serrated Nut

For technical support, contact us at 1-800-565-5321 C5-BA13-4 Installation Guide |REV. A1 | Page 7

1.2.2 Attach the straps to the end panels.

NOTE: Hand-tighten the bolts for adjustment.

1.2.3 Attach the bracket head to the bracket arm.

TOOLS

qCordless Impact

q1/2" Socket

HARDWARE USED

8× hand-tighten the bolts

#90-204 Hex Bolt 5/16" × 3/4"

#98-116 Flat Washer

#94-116 Serrated Nut

40 - 716

40 - 715

×4

For technical support, contact us at 1-800-565-5321 C5-BA13-4 Installation Guide |REV. A1 | Page 8

PHASE 2 – INSTALLATION

2.1 ATTACH WALL BRACKETS TO THE END PANELS

2.1.1 • Place the assembled bottle holder into the vehicle, at the desired location.

• Attach the bracket arm to the panels aligning the bracket head along the horizontal rim of the vehicle.

HORIZONTAL RIM

BRACKET HEAD

TOOLS

qCordless Impact

q1/2" Socket

HARDWARE USED

8× hand-tighten the bolts

#90-208 Hex Bolt 5/16" × 1"

#98-116 Flat Washer

#94-116 Serrated Nut

#98-157 Spacers

For technical support, contact us at 1-800-565-5321 C5-BA13-4 Installation Guide |REV. A1 | Page 9

2.2.1 After attaching the brackets, mark the plus nut location on the vehicle rim.

PHASE 2 – INSTALLATION

2.2 MARK HOLES FOR PLUS NUTS

TOOLS

qMarker

TOOLS

qMarker

MARK

Mark the 2 holes locating each end

panel to the vehicle oor.

MARK

Mark the 2 holes locating bracket

head on the vehicle horizontal rim.

NOTE: If you are using Ranger oor,

please go to page 12.

NOTE: If you are using Ranger wall

kit, please go to page 14.

For technical support, contact us at 1-800-565-5321 C5-BA13-4 Installation Guide |REV. A1 | Page 10

PHASE 2 – INSTALLATION

2.3 ATTACH PLUS NUTS

2.3.1 • Move the assembled bottle holder on the side.

• Drill all the marks using 1/2" drill bit w/ drill collar, then insert the plus nuts.

WARNING: Before drilling, ensure that you will not hit any critical parts of the vehicle such as the Gas tank,

Wiring Harness and Hose.

NOTE: Use 1/2" drill bit with drill collar to stop drill at 1/2" depth.

PLUSNUT

DRILL COLLAR

( seT aT 1/2")

Drill all the marks then, attach plus nuts to the

holes.

HARDWARE USED

12×

TOOLS

qCordless Drill

q1/2" Drill Bit w/ Drill Collar ( Set at 1/2" )

qPlus Nut Tool ( 5/16" )

#94-132 Plus Nut

Tabla de contenidos

Otros manuales de Rack y soporte de Ranger design

Ranger design

Ranger design C4-BA11-4 Manual de usuario

Ranger design

Ranger design MAX RACK 2.0 Manual de usuario

Ranger design

Ranger design 1530-NL Manual de usuario

Ranger design

Ranger design 1530-PC Manual de usuario

Ranger design

Ranger design 84-U0063 Manual de usuario

Ranger design

Ranger design 1050-FS Manual de usuario

Ranger design

Ranger design 76-U1236 Manual de usuario

Ranger design

Ranger design 1530-NSX Manual de usuario

Ranger design

Ranger design C4-BA11-3 Manual de usuario

Ranger design

Ranger design C4-BA13-3 Manual de usuario

Ranger design

Ranger design S2-RS60-2 Manual de usuario

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario