RANGEFUL Spear 300 PRO Manual de usuario
Repeater
Spear 300 PRO, Spear 300 V4G, Spear 300 V3G,
Spear 300 V4G-L, Spear 300 V4G-H, Spear 300 V3G-L,
Spear 1000 PRO, Spear 1000 V4G, Spear 1000 V3G,
Spear 1000 V4G-L, Spear 1000 V4G-H, Spear 1000 V3G-L,
Spear 2000 V4G, Spear 2000 V3G, Spear 2000 V4G-L,
Spear 2000 V4G-H, Spear 2000 V3G-L, Spear 2000 V5G
Installation Manual
Rev. 1.3
EN
1. Product Features ......................................................................................3
2. Safety Information ..................................................................................5
3. Functional elements ..............................................................................6
3.1. Appearance of the Repeater ..............................................................6
3.2. LED Display ....................................................................................................7
3.2.1. 5-band amplification system .....................................................7
3.2.2. 3-band amplification system .....................................................8
3.2.3. 2-band amplification system ..................................................10
3.3. Alarm LED .....................................................................................................12
3.4. Manual Gain Control (MGC) ................................................................13
3.5. Smart function ............................................................................................13
4. Installation ................................................................................................13
4.1. General conditions ...................................................................................13
4.2. Outdoor antenna installation ............................................................14
4.3. Indoor antenna installation ................................................................19
4.4. Repeater installation ..............................................................................21
4.5. Lightning Surge Protector Installation .......................................23
5. Troubleshooting .....................................................................................24
6. Contact Information .............................................................................25
Content
3
1. Product Features
Coverage area
Spear 300 PRO
Spear 300 V4G
Spear 300 V3G
Spear 300 V4G-L
Spear 300 V4G-H
Spear 300 V3G-L
Spear 1000 PRO
Spear 1000 V4G
Spear 1000 V3G
Spear 1000 V4G-L
Spear 1000 V4G-H
Spear 1000 V3G-L
Spear 2000 V4G
Spear 2000 V3G
Spear 2000 V4G-L
Spear 2000 V4G-H
Spear 2000 V3G-L
Spear 2000 V5G
Coverage area Up to 300m2Up to 1000m2Up to 2000m2
Internal
antennas 1-3 Up to 8 Up to 10
Rangeful Spear is an advanced repeater created for boosting 5
different types of a mobile signal at the same time and works
for all mobile operators in Europe. This repeater is a perfect
option if you use several mobile operators or need to improve
all types of connection. RANGEFUL Spear is a newly designed
signal repeater with smart functions.
Rangeful Spear is the perfect solution for improving the
mobile signal at home, office, restaurant, hotel, apartment
building, warehouse or supermarket, in the quickest time
possible. One repeater covers up to 300, 1000 or 2000 m2
(depends on a repeater modification).
4
Coverage area
Model GSM
calls
900Mhz
4G LTE
internet
800Mhz
GSM
calls
1800Mhz
4G LTE
internet
1800Mhz
3G
internet
900Mhz
4G LTE
internet
2600Mhz
3G
internet
2100Mhz
5G
internet
700Mhz
Spear 300 PRO
Spear 1000 PRO •••••••
Spear 2000 V5G • • • •
Spear 300 V4G
Spear 1000 V4G
Spear 2000 V4G • • • • •
Spear 300 V3G
Spear 1000 V3G
Spear 2000 V3G •••• •
Spear 300 V4G-L
Spear 1000 V4G-L
Spear 2000 V4G-L •••
Spear 300 V4G-H
Spear 1000 V4G-H
Spear 2000 V4G-H • • •
Spear 300 V3G-L
Spear 1000 V3G-L
Spear 2000 V3G-L • • •
Rangeful Spear is compatible with all mobile devices and
supports all services (voice, Internet, SMS, MMS, etc.) provided
by the mobile operators and presented on the site. RANGEFUL
Spear supports all mobile networks in Europe and most
countries of the world.
ATTENTION! Repeater’s signal performance and coverage
area directly depends on the signal performance of the mobile
operator’s base station. Correct installation of the repeater,
antennas and cables is crucial. It is important to understand
that abnormal use of the repeater will lead to its malfunction,
performance deterioration, as well as malfunctions in mobile
operator’s base station. The user is responsible for all possible
problems caused by abnormal use.
5
•
•
•
•
•
•
2. Safety Information
Only qualified personnel are allowed to install the repeater,
cables and antennas.
The antennas and the cables must be connected only when
the repeater power is off to avoid damage to the repeater.
Connection to different power source than those specified
may result in equipment malfunction and damage. If the
restrictions are not followed, fire hazard is possible.
Do not disassemble the repeater, install or remove accessories
by yourself. This may result in equipment malfunction or electric
shock.
Do not install the repeater near the heating equipment to
avoid heating the operating repeater.
Do not cover the repeater, as this may affect the heat
dissipation.
6
1 – Indoor Antenna Connector (N-Female)
2 – Power LED
3 – On / Off Switch
4~8 – Alarm LED 800 / 900 / 1800 / 2100 / 2600 MHz
9 – Power supply input
10 – Smart function LED
11 – Outdoor Antenna Connector (N-Female)
12 – Ground
3. Functional elements
1
2 4 5 6 7 8 10
3 9 11 12
3.1. Appearance of the Repeater
7
1
8 9 10 11 12
25
67
3 4
3.2. LED Display
3.2.1. 5-band amplification system
Applies to models Spear 300 PRO, Spear 1000 PRO
1 – 5 bars of the output signal strength indicator, which show
you the maximum output power of the repeater. Each signal bar
represents 5dB.
4 – Antenna Isolation Detection. When the repeater is first
powered up, the repeater will detect the oscillation
automatically between the outdoor antenna and indoor
antenna.
5 – Uplink Sleep Mode. The uplink of the repeater is in standby
mode when there is no call or data transmission. It will activate
immediately when a call/data session is initiated.
2 – The specific value of the input signal strength measured in
dBm, tells the exact input signal level.
3 – Shows the UL&DL central frequency of the supporting
system.
6 – Shows the UL maximum gain.
7 – Shows the DL maximum gain.
8
3.2.2. 3-band amplification system
1
2
3
4
9 10 11 12 13
5 6 7 8
8 – Selection or confirmation of the settings
LCD screen shows one working frequency at a time, and it will
change automatically each 5 seconds from low frequency to
high frequency.
1 – The line shows the working status of amplification system 1.
– The line shows the working status of amplification system 2.2 – The line shows the working status of amplification system 3.3
Applies to models Spear 300 V4G, Spear 1000 V4G, Spear 2000
V4G, Spear 300 V3G, Spear 1000 V3G, Spear 2000 V3G, Spear
2000 V5G.
9 – Back to the previous page or cancel the settings.
10 – Increase the gain oradjust the center frequency upward.
11 – Decrease the gain or adjust the center frequency downward.
12 – Smart function that repeater could set the gain
automatically to prevent the Alarm. Press this icon to turn ON
or turn OFF this function.
9
4 – 5 bars of the output signal strength indicator, which shows
you the maximum output power of the repeater. Each signal bar
represents 5dB.
8 – Antenna Isolation detection. When you turn on the repeater
for the first time, the repeater automatically detects the
oscillation between the outdoor antenna and the indoor
antenna.
7 – Displays the maximum Upload and Download gain.
6 – Uplink Sleep Mode. The uplink of the repeater is in standby
mode when there is no call or data transmission. It will be
activated immediately when a call or data session is initiated.
5 – The specific value of input signal strength measured in dBm,
which shows us the exact input signal level.
13 – Smart function. The repeater can automatically adjust the
gain to prevent Alarm.
9 – Enter to select or confirm the settings.
10 – Return to the previous page or cancel the settings.
11 – Increase the gain.
12 – Decrease the gain.
10
3.2.3. 2-band amplification system
1
2
7
9 10 11 12 13
8
3 4 5 6
Applies to models Spear 300 V4G-L, Spear 1000 V4G-L, Spear
2000 V4G-L, Spear 300 V4G-H, Spear 1000 V4G-H, Spear 2000
V4G-H, Spear 300 V3G-L, Spear 1000 V3G-L, Spear 2000 V3G-L.
1 – The line shows the working status of amplification system 1.
5 – Show the maximum Upload gain.
7 – Show the status of Uplink Sleep mode and ISO for system1.
11 – Increase the gain.
9 – Enter or confirm the settings for selection.
13 – Smart function. The repeater can automatically adjust the
gain to prevent Alarm.
2 – The line shows the working status of amplification system 2.
6 – Display the Download maximum gain.
8 – Show the status of Uplink Sleep mode and ISO for system2.
12 – Decrease the gain.
10 – Return to the previous page or cancel the settings.
3 – 5 bars of the output signal strength indicator, which shows
you the maximum output power of the repeater. Each signal ba
represents 5dB.
4 – The specific value of input signal strength measured in dBm,
which shows us the exact input signal level.
Este manual sirve para los siguientes modelos
17
Tabla de contenidos
Idiomas:
Otros manuales de Reloj de repetición de RANGEFUL
