R&S SMCVB-K167 Manual de usuario
R&S®SMCVB-K167
DVB-S
User Manual
User Manual
Version 02
1179105802
(;Ý:È2)
This document describes the following software option:
●R&S®SMCVB-K167
1434.3954.02
This manual describes firmware version FW 4.70.176.xx and later of the R&S®SMCV100B.
© 2020 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: +49 89 41 29 - 0
Email: [email protected]
Internet: www.rohde-schwarz.com
Subject to change – Data without tolerance limits is not binding.
R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
1179.1058.02 | Version 02 | R&S®SMCVB-K167
The following abbreviations are used throughout this manual: R&S®SMCVB is abbreviated as R&S SMCVB
Contents
R&S®SMCVB-K167
3User Manual 1179.1058.02 ─ 02
Contents
1 Preface.................................................................................................... 5
1.1 About this Manual......................................................................................................... 5
1.2 Documentation Overview............................................................................................. 6
1.2.1 Getting Started Manual................................................................................................... 6
1.2.2 User Manuals and Help...................................................................................................6
1.2.3 Service Manual............................................................................................................... 6
1.2.4 Instrument Security Procedures......................................................................................7
1.2.5 Printed Safety Instructions.............................................................................................. 7
1.2.6 Data Sheets and Brochures............................................................................................ 7
1.2.7 Release Notes and Open Source Acknowledgment (OSA)............................................ 7
1.2.8 Application Notes, Application Cards, White Papers, etc................................................7
2 Welcome to the DVB-S / DVB-S2 Option..............................................8
2.1 Accessing the DVB-S / DVB-S2 Dialog....................................................................... 8
2.2 Scope............................................................................................................................. 9
2.3 Notes on Screenshots.................................................................................................. 9
3 About the DVB-S / DVB-S2 Option..................................................... 10
3.1 Required Options........................................................................................................ 10
4 DVB-S Configuration and Settings..................................................... 11
4.1 General Settings..........................................................................................................11
4.2 Input Signal Settings.................................................................................................. 12
4.2.1 General Settings........................................................................................................... 13
4.2.2 Info................................................................................................................................ 16
4.2.3 Test Signal Settings.......................................................................................................17
4.2.4 IP Channnel x Settings..................................................................................................19
4.3 Coding Settings...........................................................................................................22
4.4 Special Settings.......................................................................................................... 24
4.5 Global Connector Settings.........................................................................................25
4.6 TS Player......................................................................................................................25
4.6.1 TS Player Settings........................................................................................................ 26
4.6.2 Player Output................................................................................................................ 29
Contents
R&S®SMCVB-K167
4User Manual 1179.1058.02 ─ 02
4.6.2.1 General......................................................................................................................... 29
4.6.2.2 Stuffing.......................................................................................................................... 31
4.6.3 Seamless Loop Settings............................................................................................... 32
4.7 Local IP Data Network Settings................................................................................. 34
5 Performing DVB-S / DVB-S2 Signal Generation Tasks.....................37
5.1 Configuring the Input Signal......................................................................................37
5.1.1 How to Apply an External IP Input Signal..................................................................... 37
5.1.2 How to Apply an External TS Input Signal.................................................................... 40
5.1.3 How to Generate an Internal TS Signal........................................................................ 41
5.2 Monitoring the Input Signal........................................................................................41
5.2.1 How to Monitor External IP Input Data..........................................................................42
5.2.2 How to Monitor an External TS Input Signal................................................................. 42
5.2.3 How to Monitor an Internal TS Player Signal................................................................ 43
6 Remote-Control Commands............................................................... 44
6.1 General Commands.................................................................................................... 45
6.2 Input Signal Commands............................................................................................. 46
6.2.1 General Commands...................................................................................................... 46
6.2.2 Info Commands.............................................................................................................48
6.2.3 Test Signal Commands................................................................................................. 49
6.2.4 IP Subsystem................................................................................................................ 51
6.3 Coding Commands..................................................................................................... 54
6.4 Special Commands..................................................................................................... 55
6.5 TSGen Subsystem...................................................................................................... 56
6.6 BCIP Subsystem......................................................................................................... 63
Glossary: Abbreviations......................................................................67
Glossary: Specifications..................................................................... 69
List of Commands................................................................................70
Index......................................................................................................72
Preface
R&S®SMCVB-K167
5User Manual 1179.1058.02 ─ 02
1 Preface
1.1 About this Manual
This user manual provides all the information specific to the DVB-S / DVB-S2 option
R&S SMCVB-K167. All general instrument functions and settings common to all appli-
cations and operating modes are described in the main R&S SMCV100B user manual.
The main focus in this manual is on the provided settings and the tasks required to
generate a signal. The following topics are included:
●Welcome to the DVB-S / DVB-S2 option R&S SMCVB-K167
Introduction to and getting familiar with the option
●About the DVB-S / DVB-S2
Background information on basic terms and principles in the context of the signal
generation
●DVB-S / DVB-S2 Configuration and Settings
A concise description of all functions and settings available to configure signal gen-
eration with their corresponding remote control command
●How to Generate a Signal with the DVB-S / DVB-S2 Option
The basic procedure to perform signal generation tasks and step-by-step instruc-
tions for more complex tasks or alternative methods
As well as detailed examples to guide you through typical signal generation sce-
narios and allow you to try out the application immediately
●Remote Control Commands
Remote commands required to configure and perform signal generation in a
remote environment, sorted by tasks
(Commands required to set up the instrument or to perform common tasks on the
instrument are provided in the main R&S SMCV100B user manual)
Programming examples demonstrate the use of many commands and can usually
be executed directly for test purposes
●List of remote commands
Alphabetical list of all remote commands described in the manual
●Index
Contents and scope
This description assumes R&S SMCV100B equipped with all available options.
Depending on your model and the installed options, some of the functions may not be
available on your instrument.
Notes on screenshots
When describing the functions of the product, we use sample screenshots. These
screenshots are meant to illustrate as much as possible of the provided functions and
possible interdependencies between parameters. The shown values may not represent
realistic usage scenarios.
About this Manual
Preface
R&S®SMCVB-K167
6User Manual 1179.1058.02 ─ 02
The screenshots usually show a fully equipped product, that is: with all options instal-
led. Thus, some functions shown in the screenshots may not be available in your par-
ticular product configuration.
1.2 Documentation Overview
This section provides an overview of the R&S SMCV100B user documentation. Unless
specified otherwise, you find the documents on the R&S SMCV100B product page at:
www.rohde-schwarz.com/manual/smcv100b
1.2.1 Getting Started Manual
Introduces the R&S SMCV100B and describes how to set up and start working with the
product. Includes basic operations, typical measurement examples, and general infor-
mation, e.g. safety instructions, etc. A printed version is delivered with the instrument.
1.2.2 User Manuals and Help
Separate manuals for the base unit and the software options are provided for down-
load:
●Base unit manual
Contains the description of all instrument modes and functions. It also provides an
introduction to remote control, a complete description of the remote control com-
mands with programming examples, and information on maintenance, instrument
interfaces and error messages. Includes the contents of the getting started manual.
●Software option manual
Contains the description of the specific functions of an option. Basic information on
operating the R&S SMCV100B is not included.
The contents of the user manuals are available as help in the R&S SMCV100B. The
help offers quick, context-sensitive access to the complete information for the base unit
and the software options.
All user manuals are also available for download or for immediate display on the Inter-
net.
1.2.3 Service Manual
Describes the performance test for checking the rated specifications, module replace-
ment and repair, firmware update, troubleshooting and fault elimination, and contains
mechanical drawings and spare part lists.
The service manual is available for registered users on the global Rohde & Schwarz
information system (GLORIS):
Documentation Overview
Preface
R&S®SMCVB-K167
7User Manual 1179.1058.02 ─ 02
https://gloris.rohde-schwarz.com
1.2.4 Instrument Security Procedures
Deals with security issues when working with the R&S SMCV100B in secure areas. It
is available for download on the Internet.
1.2.5 Printed Safety Instructions
Provides safety information in many languages. The printed document is delivered with
the product.
1.2.6 Data Sheets and Brochures
The data sheet contains the technical specifications of the R&S SMCV100B. It also
lists the options and their order numbers and optional accessories.
The brochure provides an overview of the instrument and deals with the specific char-
acteristics.
See www.rohde-schwarz.com/brochure-datasheet/smcv100b
1.2.7 Release Notes and Open Source Acknowledgment (OSA)
The release notes list new features, improvements and known issues of the current
firmware version, and describe the firmware installation.
The open-source acknowledgment document provides verbatim license texts of the
used open source software.
See www.rohde-schwarz.com/firmware/smcv100b
1.2.8 Application Notes, Application Cards, White Papers, etc.
These documents deal with special applications or background information on particu-
lar topics.
See www.rohde-schwarz.com/application/smcv100b
Documentation Overview
Welcome to the DVB-S / DVB-S2 Option
R&S®SMCVB-K167
8User Manual 1179.1058.02 ─ 02
2 Welcome to the DVB-S / DVB-S2 Option
The R&S SMCVB-K167 is a firmware application that adds functionality to generate
signals in accordance with the DVB-S / DVB-S2 digital standards.
The R&S SMCVB-K167 option features:
●DVB-S signal generation
●Basic DVB-S2 signal generation
This user manual contains a description of the functionality that the application pro-
vides, including remote control operation.
All functions not discussed in this manual are the same as in the base unit and are
described in the R&S SMCV100B user manual. The latest version is available at:
www.rohde-schwarz.com/manual/SMCV100B
Installation
You can find detailed installation instructions in the delivery of the option or in the
R&S SMCV100B service manual.
2.1 Accessing the DVB-S / DVB-S2 Dialog
To open the dialog with DVB-S / DVB-S2 settings
► In the block diagram of the R&S SMCV100B, select "Baseband > DVB-S / DVB-
S2".
A dialog box opens that displays the provided general settings.
The signal generation is not started immediately. To start signal generation with the
default settings, select "State > On".
Accessing the DVB-S / DVB-S2 Dialog
Welcome to the DVB-S / DVB-S2 Option
R&S®SMCVB-K167
9User Manual 1179.1058.02 ─ 02
2.2 Scope
Tasks (in manual or remote operation) that are also performed in the base unit in the
same way are not described here.
In particular, it includes:
●Managing settings and data lists, like storing and loading settings, creating and
accessing data lists, or accessing files in a particular directory.
●Information on regular trigger, marker and clock signals and filter settings, if appro-
priate.
●General instrument configuration, such as checking the system configuration, con-
figuring networks and remote operation
●Using the common status registers
For a description of such tasks, see the R&S SMCV100B user manual.
2.3 Notes on Screenshots
When describing the functions of the product, we use sample screenshots. These
screenshots are meant to illustrate as many as possible of the provided functions and
possible interdependencies between parameters. The shown values may not represent
realistic usage scenarios.
The screenshots usually show a fully equipped product, that is: with all options instal-
led. Thus, some functions shown in the screenshots may not be available in your par-
ticular product configuration.
Notes on Screenshots
About the DVB-S / DVB-S2 Option
R&S®SMCVB-K167
10User Manual 1179.1058.02 ─ 02
3 About the DVB-S / DVB-S2 Option
DVB-S and DVB-DSNG are DVB standards for satellite services. DSNG is the abbrevi-
ation for digital news gathering.
DVB-S complies with specification EN 300 421.
DVB-DSNG complies with specification EN 301 210.
3.1 Required Options
The equipment layout for generating DVB-S / DVB-S2 signals includes:
●Base unit
●Option Enable Broadcast Standard (R&S SMCVB-K519)
●Option DVB-S / DVB-S2 (R&S SMCVB-K167)
Required Options
Tabla de contenidos
Otros manuales de Unidad de control de R&S
Manuales populares de Unidad de control de otras marcas
Festo
Festo Compact Performance CP-FB6-E Manual de lista de piezas
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manual de usuario
JS Automation
JS Automation MPC3034A Manual de usuario
JAUDT
JAUDT SW GII 6406 Series Guía rápida
Spektrum
Spektrum Air Module System Manual de usuario
BOC Edwards
BOC Edwards Q Series Manual de usuario
