RADLEY 1900PSI Manual de usuario
5044-033
1
1900PI PSU WSE
OWNER’S MANUAL
2 Year Limited Warranty on tool
WEAR CSA APPROVED
EYE PROTECTION
WEAR EAR
PROTECTION
WEAR FACE
PROTECTION
1900PSI
PRESSURE WASHER
2 Year
warranty
1
POC SEFCTOS
1900PSI PRESSURE WASHER
Rated voltage AC 120 V , 60 Hz
Rated current 13 A
Rated pressure 1300 PSI
Maximum pressure 1900 PSI
Maximum water inlet pressure 170 PSI
Maximum water inlet temperature 122°F / 50°C
1.4 GPM
Machine weight 18.3 lbs / 8.3 kg
NEED ASSISTANCE?
Call us on our toll free customer support line:
∫
∫Replacement parts
∫Parts missing from package
5044-033
2
1900PI PSU WSE
TBE F CNET
..........................................................................................................1
.................................................................................................................. 2
..................................................................................................................... 3
Included Pieces ..................................................................................................................... 7
Preparation for Operation ................................................................................................... 8
Operation ............................................................................................................................... 11
Maintenance ........................................................................................................................ 14
....................................................................................................................15
...................................................................................................................... 17
Parts ........................................................................................................................................18
...............................................................................................................................20
IMPORTANT!
SAFETY INSTRUCTIONS
ALL OPERATORS MUST READ THESE INSTRUC-
TIONS BEFORE USE
SFT ANNS
DANGER
-
ing:
∫
∫
∫
∫
∫
∫
Risk of electric shock. Inspect the cord before using the device. Do not use it if the
cord is damaged.
∫
dangerous if misused, and therefore must not be directed at people, animals, electri-
cal devices or the unit itself.
∫
-
tion.
-
WARNING - INJECTION HAZARD
∫
CAUTION - DETERGENTS
∫
-
CAUTION - SPRAY GUN
∫
-
3
5044-033
4
1900PI PSU WSE
CAUTION - WATER CONNECTIONS
∫
∫
∫
∫
READ ALL INSTRUCTIONS BEFORE USING THIS PRESSURE WASHESR
∫
∫Suitable water temperature: from 5 to 40°C/41 to 104°F
CAUTION - USE
∫
with the controls.
∫
∫Avoid accidental starts. Shut power OFF before connecting or disconnecting the
power cord.
∫
∫Do not pull on the cord to disconnect from the outlet.
∫
operation.
∫
∫Do not stand on unstable surfaces. Stand with both feet balanced at all times.
∫Keep the operating area clear of people and pets.
IMPORTANT - MAINTENANCE
∫
∫
∫
parts.
∫
∫
the pressure.
INTENDED APPLICATION
not designed for industrial use. Please refer to the icons below for suggested applica-
5
IMPORTANT
Stairs Lawn
equipment
Vehicle Driveway
Siding Fencing Deck or patio Garage
SAVE THESE INSTRUCTIONS FOR REFERENCE
SAFETY WARNING AND ELECTRICAL INFORMATION
WARNING
∫
EXTENSION CORDS
observe all warnings and instructions listed below:
WARNING
∫
CAUTION - USE A SUFFICIENT GAUGE
∫
∫
store indoors while not in use.”
∫
∫
disconnect the device.
∫
∫
the extension cord from the product.
∫
touch the plug with wet hands.
5044-033
6
1900PI PSU WSE
SERVICING OF A DOUBLE INSULTATED APPLIANCE
grounding. Grounding means are not provided for a double insulated product, nor
should grounding means be added to the product. Servicing a double insulated product
-
Replacement parts for a double insulated product must be identical to the original
READ ALL INSTRUCTIONS BEFORE USING THIS PRESSURE WASHER
7
ICDD PES
missing and damaged, do not attempt to assemble or use the product.
567910
11
12
13
8
14
15
16
17
1
2
3
4
1. Handle 2. Hose reel
17. Crank
5044-033
8
1900PI PSU WSE
PERTO FR ORTO
ALWAYS USE THE HANDLE TO TRANSPORT.
HOW TO SET UP YOUR UNIT
1. Install gun holder.
NOTE:
3. Install hose reel crank to hose reel handle after have the grooves aligned.
9
4.
Insert the lance into the gun. Push and turn the lance clockwise onto the gun until
-
be inserted into the gun for proper use.
5. Attach the high pressure hose to the pressure water outlet of the machine.
Push button to remove hose.
2
1
If there is a hose with universal connector at hand to use, attach the hose connect
the hose to the thread end of hose connect adapter.
Hose connect adapter (Quick release-thread connect)
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Hidrolavadora de RADLEY
