Radionics D205 Manual de usuario

Security System Users Guide

Table of Contents

About This Users Guide ......................................................... 2

Introduction ............................................................................ 2

Security System Basics ............................................................ 3

Controlled Points .................................................................... 4

24-Hour Points ........................................................................ 5

Keypad Keys ............................................................................ 5

Keypad Lights ......................................................................... 6

Keypad Tones .......................................................................... 7

System Events ......................................................................... 8

Silencing Alarms ..................................................................... 9

Turning the System Off ........................................................ 10

Turning the System All On ................................................... 11

Turning the System All On, with No Delay ......................... 12

Turning On Part of the System (Part On) ............................ 13

Turning the System Part On, with No Delay ....................... 14

Turning System On, With Points Open (Bypassing Points) 15

Viewing Alarm Memory ........................................................ 16

Resetting the System ............................................................. 17

Selecting Watch Tone ........................................................... 18

Selecting Watch Points ......................................................... 19

Checking System Troubles ................................................... 20

Changing Passcodes ............................................................. 21

Step Outside .......................................................................... 22

Exit Only ............................................................................... 23

Silencing the Trouble Tone .................................................. 24

Show Passcode Types ........................................................... 25

Change Passcode Type ......................................................... 26

Change Other Users Passcodes ........................................... 27

System Test ........................................................................... 28

Security System Limitations ................................................. 29

Fire Safety and Evacuation ................................................... 30

Security System Glossary ...................................................... 31

Maintenance and Service ...................................................... 32

How to Clean the keypad ..................................................... 32

About This Users Guide

This users guide shows you how to use and maintain your

security system. It covers basic system functions, such as turning

the system on and off.

The functions described in this guide are programmed by your

security company. Some of them may not be included in your

system. Some of the functions covered may require you to enter

your personal passcode.

Introduction

Your system helps to secure life, property, and investments

against fire, theft, and bodily harm. It consists of a keypad (or

keypads), sensors such as motion detectors or devices located on

doors and windows, and other sensing devices designed to detect

the presence of smoke or combustion. Each of these devices is

connected to a sophisticated electronic brain, which processes all

events registered by the system.

Control of your security system is achieved through the keypad,

which offers a variety of basic and advanced features. Its function,

versatility, and ease of operation make it ideal for home or office.

The keypad is tailored to meet your individual needs. Moreover, it

has been designed with you, the user, in mind.

Security System Basics

What is a Point?

A point is a detection device, or group of devices connected

to your security system. The keypad shows point status through

the lights numbered 1 through 8 on the keypad display. Each point

can represent a single door, window, motion sensor, smoke detec-

tor, or other detection device.

What is a Faulted Point?

When a point (such as a door or window) is closed, it is said to

be normal. When the door or window is open, the point is said

to be faulted, or not normal. When you turn your system on, you

will usually want all of the points in your system to be normal. You

can turn your system on with faulted points by using the Bypassing

Points procedure.

The keypad shows faulted points by lighting the point status

display (numbered 1 through 8) .

Are All Points the Same?

No. There are two basic types of points, Controlled and 24-hour.

Controlled Points

Controlled points respond to alarm conditions depending upon

whether the system is turned on or turned off . They are pro-

grammed to either respond instantly to alarm conditions or to

provide a delay for you to reach the keypad and turn the system off.

Various controlled points may be located throughout your house.

When you turn your system on, you have the option of turning on

all controlled points (All On) or just some of the controlled points

(Part On).

All On

When you turn your system All On, you are turning on all

controlled points, both interior (motion detectors) and exterior

(doors and windows of the building).

Part On

When you turn your system Part On, you are turning on a

portion of the controlled points. The particular points included in

this portion are determined by your alarm company. Part points

may include only the exterior (doors and windows) of your system,

or the points on the first floor of a two-story house. Check with

your security company to learn which points are Part points.

24-Hour Points

24-hour points are always on, even when the system is turned

off. There are two types of 24-hour points, Fire points and Non-

Fire points.

Fire Points

Fire points only monitor fire detection devices, such as smoke

detectors. They are always on and cannot be turned off.

Non-Fire 24-Hour Points

Non-fire points are always on and cannot be turned off.

Keypad Keys

Your keypad has 15 keys. These keys perform various functions,

as described below.

1, 2, 3, 4, 5, 6, 7, 8, 9, 0

Each of the numeric keys performs a different function. For a

description of each, refer to the section of this guide that describes

the various system functions.

CLEAR

Use the CLEAR key to exit any function and start over.

A special function may be assigned to this key by your security

company. For your system this key_________________________.

A special function may be assigned to this key by your security

company. For your system this key_________________________.

A special function may be assigned to this key by your security

company. For your system this key_________________________.

✽✽

✽

This key is not used.

Keypad Lights

The keypad uses lights to indicate various conditions, such as

whether your system is on or off, the status of protective points,

whether there is a system trouble, and whether there is an alarm.

Light Function

On Lights when the system is All or Part On.

Flashes during exit delay and when an alarm

occurs

No Delay Lights when the system is All or Part On

without entry or exit delay. Flashes during Step

Outside function.

1 to 8 Point lights show the status of each point.

When a point light is on steadily, that point

has been turned on. When the point light is

winking, the point is faulted. When the point

light is flashing, an alarm is indicated.

All Lights when the system is All On. When the

system is off, the All light comes on when all

points are ready to turn on (no doors or

windows are open). Winks when turning All On

with door or windows open.

Part Lights when the system is Part On. When the

system is off, lights when Part points are ready

to turn on. Flashes when changing passcodes.

OK Flashes when an alarm occurs. Winks when

there is a system trouble.

Keypad Tones

Your keypad emits several distinct tones and flashes keypad

lights to alert you to system events. Additional bells or sirens may

also be connected to your system. Bells or sirens mounted on the

exterior of your premises alert neighbors to emergencies and

provide an audible guide for police and fire fighters.

1. Fire Alarm Tone: When a fire point activates, the keypad

emits a warble tone on for one second, then briefly off (repeatedly).

2. Burglary Alarm Tone: When a burglary point activates

while your system is on, your keypad emits a continuous warble

tone. The tone sounds for the time set by your security company.

3. Trouble Tone: When a system component is not function-

ing properly, your keypad emits a warble tone that is on briefly,

followed by a pause, followed by the warble tone (repeatedly). If

the problem is with a point, the system display indicates which

point is faulted.

4. Keypress Tone: Pressing any key on the keypad sounds a

short pip, indicating that the entry is accepted.

5. Entry Delay Tone: When you enter the premises through a

point programmed for entry delay, the keypad emits a repeating

short beep, long beep tone to remind you to turn off your system.

If the system is not turned off before the entry delay expires, an

alarm report may be sent to your alarm company.

6. Exit Delay Tone: After you turn your system on, the keypad

emits an intermittent beep tone and counts down the exit delay

time. If you dont exit before the delay time expires, and an exit

delay door is faulted, an alarm occurs.

7. Error Tone: If you press an incorrect key, your keypad emits

an error tone to indicate an invalid entry. The error tone is the same

warble tone as the Trouble Tone, but it is not repeated.

8. OK Tone: Indicates that a keypad entry is accepted; for

example, that a correct passcode has been entered. The keypad

emits a single, high-pitched beep tone for one second.

9. Watch Tone: The keypad emits a tone to alert you when any

watched point is faulted. The tone varies in duration, depending

upon the Watch Tone selected (see Selecting Watch Tone).

System Events

Your system responds to four types of events. If more than one

event occurs, your system sorts them into one of four groups. The

groups (highest priority first) are: Fire Alarms, Burglary Alarms,

Fire Troubles, and Non-Fire Troubles.

Fire Alarms

Fire alarms are the highest priority events. When a fire point

activates, your keypad emits a warble tone that is on for one

second, then briefly off (repeatedly). Evacuate all occupants and

investigate for smoke or fire. Ensure that all occupants know the

difference between the burglary tone and the fire tone. The tone

sounds for the time set by your security company.

The keypad lights the point lights of the points that go into

alarm.

Burglary Alarms

Burglary alarms are the second priority. When a burglary point

activates while your system is turned on, your keypad emits a

constant warble tone. The tone sounds for the time set by your

security company.

The keypad lights the point lights of the points that go into

alarm.

Fire Trouble Events

When a fire trouble (such as a loose wire) occurs, your keypad

emits a trouble tone, which is a warble tone that is on briefly, then

followed by a pause, followed by the warble tone (repeatedly).

The keypad display winks the OK light to indicate the presence

of a system trouble. See Checking System Troubles to determine the

nature of the trouble.

Non-Fire Trouble Events

When a trouble event (e.g. power failure) occurs, your keypad

emits a trouble tone, which is a warble tone that is on briefly,

followed by a pause, followed by the warble tone (repeatedly).

The keypad display winks the OK light to indicate the presence

of a system trouble. See Checking System Troubles to determine the

nature of the trouble.

How Your System Reports Alarms

Your security system may be programmed to automatically

disconnect your telephones when sending reports to your security

company. Once the report is completed, your security system

returns the telephones to normal operation (check with your

security company).

Your system makes repeated attempts to send reports to your

security company. In the event your system fails to report, the

keypad will signal a system trouble. Follow the Checking System

Troubles procedure.

Note: If your telephone ser vice is interrupted, your security

system cannot send reports to your security company unless it has

an alternate means of transmitting them.

Silencing Alarms

When there is an alarm, the alarm tone sounds and the point or

points in alarm light up. If you enter your passcode before the

system dials your alarm company, the alarm is canceled.

1. When an alarm occurs, the OK light and point lights (1 to 8)

flash. For example if point 4 produces the alarm event, then point

4 flashes:

2. Enter your passcode to silence the alarm. If you enter your

passcode before the system dials your alarm company, the alarm is

canceled and the OK light stops flashing. If the OK light contin-

ues to flash, an alarm report was sent to your alarm company.

3. Use Viewing Alarm Memory to review the points that caused

the alarm. Use Resetting The System to reset the OK light and clear

alarm memory.

Otros manuales para D205

Otros manuales de Sistema de seguridad de Radionics

Radionics

Radionics D9412 Manual de usuario

Radionics

Radionics Security System 8112 Manual de usuario

Radionics

Radionics D8112 Manual de usuario

Radionics

Radionics Security System Manual de usuario

Radionics

Radionics Security System Manual de usuario

Radionics

Radionics 6112 Manual de usuario

Radionics

Radionics Security System 8112 Manual de usuario

Radionics

Radionics D2112 Manual de usuario

Radionics

Radionics READYKEY K1100 Manual de usuario

Radionics

Radionics D7212 Manual de usuario

Radionics

Radionics D2112 Manual de usuario

Radionics

Radionics READYKEY K6100 Manual de usuario

Radionics

Radionics D6112 Manual de usuario

Radionics

Radionics D8112 Manual de usuario

Radionics

Radionics D7212 Manual de usuario

Radionics

Radionics 7112 Manual de usuario

Radionics

Radionics D636 Manual de usuario

Manuales populares de Sistema de seguridad de otras marcas

Inner Range

Inner Range Concept 2000 Manual de usuario

Climax

Climax Mobile Lite R32 Instrucciones de montaje

CADDX

CADDX NX-6 Manual de usuario

FBII

FBII XL-31 Series Manual de usuario

Johnson Controls

Johnson Controls PENN Connected PC10 Manual de usuario

Aeotec

Aeotec Siren Gen5 Manual de usuario

Blaupunkt

Blaupunkt SA 2700 Manual de usuario

IDEAL

IDEAL Accenta Manual del propietario

AJAX

AJAX DoubleButton Manual de usuario

Swann

Swann SW-P-MC2 Manual de usuario

Ecolink

Ecolink Siren+Chime Manual de usuario

Digital Monitoring Products

Digital Monitoring Products XR150 Manual de usuario

EDM

EDM Solution 6+6 Wireless-AE Manual de usuario

Highway Safety Group

Highway Safety Group EA401 Manual de usuario

Siren

Siren LED GSM Manual de usuario

Detection Systems

Detection Systems 7090i Instrucciones de montaje

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manual de usuario

Siemens

Siemens FDM273 Manual de usuario