Racelogic VBVDHD2 Manual de usuario
Quick Start Guide – VBOX Video HD2 (v1-5)
Introduction
The VBOX Video HD2 system is a twin camera 1080p video system, with a live time graphical overlay display. The HD2
is compatible with existing OLED systems, as well as Racelogic modules such as the Micro Input Module and Mini Input
Module.
The system is supplied with VBOX Video HD2 setup software, which allows the user to fully customise the graphical
overlay and configure CAN channels to be captured from a connected vehicle CAN bus, or Racelogic module.
VBOX Video Registration
So that Racelogic can continue to provide you with notification of the latest software releases, firmware upgrades and to
offer technical support, please register your VBOX Video.
Please register your unit here.
What’s included in the kit
The standard inventory and optional extras available for the VBOX Video HD2 are listed below.
VBOX Video HD2 Standard Inventory
Description Quantity Product Code
VBOX Video HD2 Unit 1 VBVDHD2
VBOX Video 1080p Camera (3 m),
IP65 Rated 1 or 2 (dependent on package) RLACS222
Mono Microphone (2.5 m) 1 RLACS221
Lightweight Windscreen Suction
Mount 2 RLACS287
https://en.racelogic.support//Product_Info/Video_Data_Loggers/VBOX_Video_HD2/
VBOX_Video_HD2_(v1-5)/Quick_Start_Guide_%E2%80%93_VBOX_Video_HD2_(v1-5)/Quick_Start_Guide_%E2%80%93_VBOX_Video_HD2_(v1-5)
1
Description Quantity Product Code
Cigar Plug Power Supply (2 m) 1 RLCAB010LE
GPS/GLONASS/Galileo Low Profile
Antenna (3 m) 1 RLACS262
32 GB SD Card - Including VBOX
Video Software 1 RLACS231
Camera Clamp 2 RLACS269
VBOX Video HD2 Optional Extras
Description Product Code
Unterminated Power Supply (2 m) RLCAB014LE
CAN / Serial Splitter RLCAB081
USB Logging Cable RLCAB073
Dual Microphone Splitter RLCAB132
Mono Microphone (for use with RLCAB132) RLACS133
OLED Laptiming Display RLVBDSP05 / 04
Micro Input Module RLVBMICIN01L
Mini Input Module RLVBMIM01
CAN Gateway RLVBCGW01
CAN Cables – OBD/Unterminated RLCAB069L /RLCAB015L
Clip on CAN bus Interface RLACS182-L
Bluetooth Remote Start/Stop Logging Switch RLACS224
Heavy-Duty Camera Clamp RLACS270
Roll Cage Mount RLACS286
Roll Cage Bracket RLACS267
https://en.racelogic.support//Product_Info/Video_Data_Loggers/VBOX_Video_HD2/
VBOX_Video_HD2_(v1-5)/Quick_Start_Guide_%E2%80%93_VBOX_Video_HD2_(v1-5)/Quick_Start_Guide_%E2%80%93_VBOX_Video_HD2_(v1-5)
2
Description Product Code
Camera Mount Extension Bar RLACS273
Mounting Cradle Suction Cups DBSUCSETX3
Li-ion Battery Pack RLACS112
Bluetooth Heart Rate Monitor RLACS227
Bluetooth OBD Module RLACS228
Quick Release Unit Mounting Bracket RLACS258
Roll Cage Unit Mount RLACS268
Harsh Environment Fan RLACS247
Second Car Kit RLACS274
Tyre Temperature Monitoring System RLACS272
Tyre Temperature Monitoring System RLACS182L
Clip-on CAN bus Interface RLACS298
LIVEU Solo HDMI RLACS333-L
Hardware Overview
https://en.racelogic.support//Product_Info/Video_Data_Loggers/VBOX_Video_HD2/
VBOX_Video_HD2_(v1-5)/Quick_Start_Guide_%E2%80%93_VBOX_Video_HD2_(v1-5)/Quick_Start_Guide_%E2%80%93_VBOX_Video_HD2_(v1-5)
3
Front Panel
Rear Panel
LED Behaviour
If two solid green LEDs are shown, the system is ready to record.
If the system is permanently fitted to a vehicle, it should be possible to view the front panel when it is mounted. A brief
overview of the LED behaviour is below.
https://en.racelogic.support//Product_Info/Video_Data_Loggers/VBOX_Video_HD2/
VBOX_Video_HD2_(v1-5)/Quick_Start_Guide_%E2%80%93_VBOX_Video_HD2_(v1-5)/Quick_Start_Guide_%E2%80%93_VBOX_Video_HD2_(v1-5)
4
OK LED
Green – Fast Flash System powering up or updating firmware/ scene
Green – Slow Flash Fully powered - No SD Card/ USB Memory
Green – Solid SD Card/ USB Memory OK – READY TO LOG
Orange – Slow Flash Requires reboot
Red – Solid
System Error
The unit will automatically power cycle after
approximately 30 seconds
GPS LED
Green – Slow Flash Searching for Satellites
Green – Solid GPS Lock OK – READY TO LOG
REC LED
Blue – Solid Recording – DO NOT REMOVE MEDIA
Blue – Fast Flash Closing Files – DO NOT REMOVE MEDIA
There is a fourth LED on the rear of the system. If the mounting solution only allows the back panel to be visible, this
status LED works on a simple ‘traffic light’ style system.
Status LED
Red System Error
Orange Not ready to record (either no GPS or no SD Card USB
Memory OK)
Green Ready to record – system all OK
Blue Recording – DO NOT REMOVE MEDIA
https://en.racelogic.support//Product_Info/Video_Data_Loggers/VBOX_Video_HD2/
VBOX_Video_HD2_(v1-5)/Quick_Start_Guide_%E2%80%93_VBOX_Video_HD2_(v1-5)/Quick_Start_Guide_%E2%80%93_VBOX_Video_HD2_(v1-5)
5
VBOX Video iOS/Android Application
To easily check and fine tune camera mounting positions and to pair bluetooth devices, the VBOX Video application can
be downloaded from the Apple App Store or the Google Play Store.Search for 'VBOX Video'.
Once you have downloaded the application to your phone, you will be able to pair with the HD2 unit’s wifi connection,
and see a live camera preview. Note: - password is the serial number of the HD2 - VVH[******].
Hardware Setup
The VBOX Video system is ready to use straight out of the box.
The VBOX Video HD2 is designed to disperse heat from internal components through the lid of the box, as such the unit
will become hot to the touch when running.
The enclosure is designed to use airflow to cool the unit down, so do ensure that the top of the HD2 is left open to the
air.
If VBOX Video HD2 is being used in extreme ambient temperatures (cabin temperature exceeding 50°C), the Harsh
Environment Fan Accessory can be used to reduce the temperature of the unit.
IMPORTANT – If the HD2 is being used in conjunction with a driver communication radio system, ensure that
there is a minimum separation distance of 20 cm between the radio system and the camera units and cables to
avoid any video interference problems.
1. Mount the GPS antenna in the centre of the roof of the vehicle, away from roof bars and other antennas. For more
information on antenna mounting positions, click here.
https://en.racelogic.support//Product_Info/Video_Data_Loggers/VBOX_Video_HD2/
VBOX_Video_HD2_(v1-5)/Quick_Start_Guide_%E2%80%93_VBOX_Video_HD2_(v1-5)/Quick_Start_Guide_%E2%80%93_VBOX_Video_HD2_(v1-5)
6
https://en.racelogic.support//Product_Info/Video_Data_Loggers/VBOX_Video_HD2/
VBOX_Video_HD2_(v1-5)/Quick_Start_Guide_%E2%80%93_VBOX_Video_HD2_(v1-5)/Quick_Start_Guide_%E2%80%93_VBOX_Video_HD2_(v1-5)
7
2. Connect the GPS antenna to the VBOX Video HD2.
3. Attach one of the cameras to the windscreen using the forward facing camera mount. Keep the camera level by
ensuring ‘Racelogic’ faces upwards.
https://en.racelogic.support//Product_Info/Video_Data_Loggers/VBOX_Video_HD2/
VBOX_Video_HD2_(v1-5)/Quick_Start_Guide_%E2%80%93_VBOX_Video_HD2_(v1-5)/Quick_Start_Guide_%E2%80%93_VBOX_Video_HD2_(v1-5)
8
4. Connect this camera to ‘CAM1’
.
5. Connect the second camera to the window, or desired mounting position.
https://en.racelogic.support//Product_Info/Video_Data_Loggers/VBOX_Video_HD2/
VBOX_Video_HD2_(v1-5)/Quick_Start_Guide_%E2%80%93_VBOX_Video_HD2_(v1-5)/Quick_Start_Guide_%E2%80%93_VBOX_Video_HD2_(v1-5)
9
6. Connect this camera to ‘CAM2’.
7. Connect the microphone to the ‘MIC’ input.
https://en.racelogic.support//Product_Info/Video_Data_Loggers/VBOX_Video_HD2/
VBOX_Video_HD2_(v1-5)/Quick_Start_Guide_%E2%80%93_VBOX_Video_HD2_(v1-5)/Quick_Start_Guide_%E2%80%93_VBOX_Video_HD2_(v1-5)
10
Este manual sirve para los siguientes modelos
4
Tabla de contenidos
