Racelogic PBT-V1 Manual de usuario

Performance Box Touch Decel Mode - Quick Start Guide

Performance Box Touch features a 10 Hz GPS receiver and a responsive 4.3” colour touch screen. The Decel Mode

allows you to perform acceleration tests using pre-defined configurations, or using your own specified values.

Registration

So that Racelogic can continue to provide you with notification of the latest software releases, firmware upgrades and to

offer technical support, please register your Performance Box Touch.

What’s Included

RLPBT-V1

Product Code Quantity Description

PBT-V1 1 Performance Box Touch Unit

RLACS184 1 Cigar Plug USB Adapter

USB2-007241 1USB 2.0 A to Right Angle Micro B

data and Charging Cable, 1.5 m

RLACS313 18 GB SD Ultima Pro UHS-1 Memory

Card

RLACS277 1 Swivel Neck Richter Suction Mount

https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Quick_Start_Guides/

Performance_Box_Touch_Decel_Mode_-_Quick_Start_Guide

RLPBT/B

Product Code Quantity Description

PBT-V1 1 Performance Box Touch Unit

RLACS184 1 Cigar Plug USB Adapter

USB2-007241 2USB 2.0 A to Right Angle Micro B

data and Charging Cable, 1.5 m

RLACS313 18 GB SD Ultima Pro UHS-1 Memory

Card

RLACS277 1 Swivel Neck Richter Suction Mount

RLACS290 1 Performance Box Touch Battery

RLACS284 1GPS/GLONASS Low Profile

Antenna, 2 m

RLACS281 1 Plastic Carry Case

https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Quick_Start_Guides/

Performance_Box_Touch_Decel_Mode_-_Quick_Start_Guide

https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Quick_Start_Guides/

Performance_Box_Touch_Decel_Mode_-_Quick_Start_Guide

Hardware Overview

Left Side

Right Side

https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Quick_Start_Guides/

Performance_Box_Touch_Decel_Mode_-_Quick_Start_Guide

Logging

Performance Box Touch logs data via an SD card inserted in to the Left Side of the Unit. The unit is supplied with an 8

GB SDHC card in a FAT32 file format, which is the only file format supported. If you are looking to purchase a new SD

card, it is recommended that any card used has a write speed of above 7 MB/s (4 MB/s absolute minimum) and a speed

class of 10 (4 absolute minimum). Racelogic recommend SD cards from quality brands such as Transcend, SanDisk,

Kingston or Lexar to ensure best results.

IMPORTANT – If an SD card is formatted in the exFAT or NTFS file formats, it will need to be reformatted into

a FAT32 file system before it will work with a Performance Box Touch unit. More information on this can be

found here.

Screen Overview

https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Quick_Start_Guides/

Performance_Box_Touch_Decel_Mode_-_Quick_Start_Guide

Setup

1. Performance Box Touch has an internal patch antenna, meaning that in many circumstances, where the unit has a

clear view of the sky without any interference, an additional antenna is not required.

However, if required, mount the external GPS antenna (RLACS284) in the centre of the roof of the vehicle, away

from roof bars and other antennas. For more information on antenna mounting positions click here.

2. If applicable, connect the external GPS antenna to the Performance Box Touch.

3. Connect the Battery (RLACS290) if required. For more information on the battery click here.

4. Connect the Swivel Neck Richter Suction Mount (RLACS277) to the rear of the unit or battery and attach to the

vehicle windscreen. For more information on mounting click here.

5. Connect the power via the Power socket, or if using the battery independent of a power source, press and hold

the Power button on the battery for a few seconds.

6. Insert the SD card into the Side of the Unit. The SD Card Icon should display as green

as long as the card has free space.

https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Quick_Start_Guides/

Performance_Box_Touch_Decel_Mode_-_Quick_Start_Guide

7. When the unit has booted, select the Mode Button

and press DECEL if it is not already selected.

8. Select the Settings Button

, then the Decel option and choose from either a Preset Test, or use Custom Start and End Parameters.

9. If you would like an audible and visual alert when the test is completed, enable Alert at End within the Settings.

10. Press the Exit Button

to return to the Decel Test screen.

https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Quick_Start_Guides/

Performance_Box_Touch_Decel_Mode_-_Quick_Start_Guide

11. Take the vehicle outside and wait for the Performance Box Touch to gain satellite lock. The Satellite Icon

should display as solid green

Note: The first time that the unit is used, it may take up to 10 – 15 minutes to fully acquire satellites. After this, it

will usually take 1 – 2 minutes to acquire satellites.

12. The unit is now ready to display live Decel Test results.

13. By default, Performance Box Touch will automatically start recording when travelling over 0.5 km/h, this can be

changed within the General Settings.

14. Tapping on the SD Card Icon when green

will manually start or stop logging data, overriding the Configured Logging Strategy.

15. The Record Icon

will show when the unit is logging data to the SD card.

If you have come to a stop, but the Record Icon is still on, press the SD Card Icon to stop the logging before

removing the card.

Sometimes, due to poor satellite visibility in a garage or close to a building, the box may start recording, even if the

car is stationary. Always check the Record Icon before ejecting the card.

IMPORTANT – The SD card shouldn't be removed when the Record Icon is on as you may lose data.

Note: If for some reason the SD card is removed whilst still recording, it may need to be repaired using a PC

before it can be reused.

https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Quick_Start_Guides/

Performance_Box_Touch_Decel_Mode_-_Quick_Start_Guide

16. A screenshot of what is displayed on the screen can be taken at any time by pressing the Screenshot Button

17. To reset all test results shown on the current screen, press the Reset Button

18. When you have finished your testing, completed test results can be viewed by pressing the Results Button

More information on Decel Mode testing can be found here.

Data Analysis

A recorded session will be saved within the SD card as a .vbo file. This can be later analysed using VBOX Test

Suite or Circuit Tools software, which can be downloaded from the VBOX Automotive Website. Features include

graphical display of logged parameters, full circuit plot, overlaid comparison laps and detailed performance analysis.

VBOX Test Suite Circuit Tools

https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch/Quick_Start_Guides/

Performance_Box_Touch_Decel_Mode_-_Quick_Start_Guide

Tabla de contenidos

Otros manuales de Instrumento de medición de Racelogic

Racelogic

Racelogic VBOX 20SL Manual de usuario

Racelogic

Racelogic RLPBT-V1 Manual de usuario

Racelogic

Racelogic RLACS184 Manual de usuario

Racelogic

Racelogic Performance Box Touch V2 Manual de usuario

Racelogic

Racelogic RLVBTOUCH-M Manual de usuario

Racelogic

Racelogic VBOX Touch Motorsport V1 Manual de usuario

Racelogic

Racelogic RLACS277RLACS29 Manual de usuario

Racelogic

Racelogic VIPS Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario