Quer URZ0181 Manual de usuario
URZ0181
MPEG-4 TERRISTERIAL
RECEIVER
USER MANUAL
Deutsch 43-56 English 1-14
Românã29- 42 Polski 15- 28
English
463
IMPORTANT SAFETY INSTRUCTIONS
WARNING
?TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PRESENT BLADE EXPOSURE.
?TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
?TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE PLUG TO WIDE
SLOT FULLY INSERTED.
1. ANT IN
2. LOOP OUT
3. IR
4. USB
5. DC 5V
REMOTE CONTROL:
1. Mute: Turn off / on voice.
2. Number key: <0,9>
3. Menu: Enter main menu
4. VOL -/+: Volume adjustment
5. EPG: Electronic program guide
6. AUDIO: Audio mode operation
7. Info: Display program information in full-
screen playing or show operation guide in
current menu
8. RECALL: Change back to previous channel
9. RECORD: TV program recording
10. MEDIA: Play media
11. STOP: Stop program playing
12. PLAY/PAUSE: Pause/Play program
playing or movie playing
13. POWER: Turn on / off, standby
14. EXIT: Cancel current operation and return
to previous menu
15. OK: Confirm selection on operating menu
16. CH+/-: Channel up/down
17. TTX: DVB teletext
18. SUBTITLE: Subtitle
19. FAV: Display favourite programs
20. TV/RADIO: Switch between TV and Radio
mode
21. PROG: Recorder / wake up timer editing
22. PAGE UP: To the previous page
23. PAGE DOWN: To the next page
24. PREV: Play previous USB media
25. NEXT: Play next USB media
26. FF and FR: Screen image zoom in / out
when in zoom mode. Speed up / slow down
when USB media playing
English
46
English
4
Connecting your Set Top Box
a) Antenna to set top box connection
Connect the aerial to the unit through ANT IN jack.
b) Set top box to TV connection
Connect the unit to TV with scart cable through scart socket.
c) Turn on your TV and the unit, then select AV IN.
Main menu
1. Installation
When user connects set top box (STB) for the first time, no channels are stored in
the unit, User should search channels first as below:
Figure 1
Figure 2
1.1. Press <OK> to enter
Installation page , then press
<CH+> / <CH-> to select the item
you want to set up, <V-> / <V+>
and <OK> to select OSD
language, Country, Time Zone
where user locates in. Also turn
on/off Summer time, LCN (Logic
channel number list an exclusive
number for every channel in ON
mode), ANT Power (Supply power
for antenna connected). Press
<OK> to save the settings. See
figure 1.
1.2. Press red button <EPG> to
confirm the setting, system will
start to search channels
automaticcaly. Green button
<AUDIO> for search channels
when user know the frequency
point. See figure 2 & 3.
English
46
English
5
Figure 3
Figure 4
<NOTE> before searching, make
sure the antenna is connected to
the STB. Once the channel scan is
finished and all the channels are
stored into the database, you can
start to watch the digital TV
channels, some typical operations
are given in this chapter. Following
is Main Menu for operating
functions.
1. Press <MENU> to enter Main
Menu.
2. Press <LEFT> / <RIGHT> to
select item you want to operate.
2. Channel Manager
2.1. Press <OK> to enter „Channel
Manager” page through „Main
Menu - Channel Manager - OK”.
2.2. Press <CH+> / <CH-> to
select a TV channel, press <EPG>
<AUDIO> <SUBTITLE> <TTX> to
edit the channel, four functions are
available for editing channels, Skip
/ Delete / Fav / Lock. See figure 4.
Skip: Press red button <EPG> to
skip selected channel.
Delete: Press green button
<AUDIO> to delete selected
channel.
Fav: Press yellow button <SUBTITLE> to edit selected channel as a favourite
channel (Note: After setting favourite channel & exit „Channel Manager” page, user
may press hot key „FAV” on remote control to find them directly).
Lock: Press blue button <TTX> to lock a selected channel, see figure 3. If you want
to remove the lock function, pls re-press the blue button <TTX>.
NOTE: Press <TV/RADIO> button to operate same for radio channel edit. After you
have finished press, exit the „Channel Manager” page, system will automatically
save changes.
English
46
English
6
Figure 5
Figure 6
Figure 7
3. Time Manager
Press <OK> to enter „Time
Manager” page through „Main
Menu - Timer Manager - OK”, than
see figure 5.
3.1. Program Timer
Press <OK> to enter Program
Timer page, then press green
button <AUDIO> to set the
TV/Radio channel, Date, Start
Time, Duration, Mode, Function
which you’d like to record. Press
<OK> to confirm the setting. See
figure 6.
3.2. Sleep Timer
Press <OK> to enter Sleep Time
page. Press <CH+> / <CH-> to
select the item you wish to set, and
press <V+> / <V-> to set the time
for sleeping. While on mode for
„Auto Power Down”, it means the
unit enter standby mode after 3h
automatically (default set is ON for
this function, please press red
button <POWER> to restart
playing). See figure 7.
English
46
English
7
Figure 9
4. Multimedia
Insert USB device into USB slot,
then press <OK> to enter
„Multimedia” page through „Main
Menu - Multimedia - OK”, then se
figure 9.
4.1. Multimedia supported files ar ilustrated below. NTFS, FAT32 and FAT16 file
system can be supported at the moment.
1) Video sice: up to SD (standard definition)
2) Photo size: up to 256M pixels (16376*16376)
3) Audio channels: 2 channels
English
46
English
8
Figure 10
Figure 11
4.2. Press <CH+> / <CH-> to
select the item (Music, Photo,
Movie, PVR) you wish to play,
<OK> to enter playing mode.
NOTE: In PVR mode, if there isn’t
any recorded files on USB drive,
you can record live program first as
per below steps:
(a) Insert USB drive into USB
socket, after seeing a hint
message on the screen „Insert
USB device”, select a channel you
want to record, then press <REC>
on remote control. See figure 10.
(b) To stop recording, press
<STOP> button, a dialogue „Do
you want to stop record now?”
display, select „OK” to stop
recording and select „Exit” to
continue. A icon always display on
left-up side of the screen during
recording. See figure 11.
Note: When USB drive if full,
system will display a message
„Disk Full Error, Leaving...”.
English
46
English
9
Formats Extension
Figure 12
Figure 13
Figure 14
5. Settings
Press <OK> to enter „Settings”
page through „Main Menu -
Settings - OK”, <CH+> / <CH-> to
select the items you wish to adjust.
See figure 12.
5.1<OK> to enter Language
Preference page after you choose
this item, using <CH+> / <CH-> &
<V+> / <V-> to select language for
Program Guide, Audio, Subtitle.
See figure 13.
5.2. Press <OK> to enter Display
Preference page after you choose
this item, using <CH+> / <CH-> &
<V+> / <V-> to select the modes
(for Display Mode , Aspect Ratio,
Video Output) which are suitable
for user’s TV. See figure 14.
English
46
English
10
Tabla de contenidos
Idiomas:
