Quadratec 12033.1000 Manual de usuario

PARTS LIST:

A) 2” Main Tube QTY 1

B) Cargo Rack Halves QTY 2

C) Cross Brace QTY 1

D) M8 x 35 Bolt QTY 2

E) M8 Washer QTY 4

F) M8 Nylock Nut QTY 4

G) M10 x75 Bolts QTY 6

H) M10 Flat Washer QTY 12

I) M10 Nylock Nut QTY 6

J) 2” Receiver Tube QTY 1

K) Plastic End Cap QTY 1

Hitch Pin & Cotter Pin - One Each

REQUIRED TOOLS:

Safety Glasses

17mm Wrench & Socket

13mm Wrench or Socket

14mm Wrench or Socket

The Trusted Source

Quadratec®Compact

Cargo Receiver Rack

Assembly & Installation Manual: for 2” Receiver Hitches

#12033.1000

TO REDUCE RISK OF SERIOUS INJURY OR PROPERTY DAMAGE:

READ ALL SAFETY MESSAGES AND UNDERSTAND ALL INSTRUC-

TIONS AND PROCEDURE NOTICES BEFORE ATTEMPTING TO

INSTALL OR USE THIS PRODUCT. FOLLOW ALL INSTRUCTIONS

AND WARNINGS WITH PRODUCT & VEHICLE OWNERS MANUAL.

REGARDING RECEIVERS: SEE PAGE 2 FOR URGENT RECEIVER

CAPACITY WARNINGS. DO NOT ALLOW RECEIVER MOUNTED

ACCESSORIES (RACKS, ETC.) TO BLOCK VEHICLE MIRRORS

OR LIGHTS. READ AND UNDERSTAND ALL CAPACITY WARNINGS.

RISK OF EYE INJURY! SAFETY GLASSES MUST BE WORN AT

ALL TIMES WHILE INSTALLING OR MAINTAINING THIS PRODUCT.

TORQUE AND RECHECK FASTENERS AFTER 250 MILES AND

FREQUENTLY THEREAFTER. INSPECT BUMPER AND MOUNT

BEFORE USE. DO NOT USE IF DAMAGED.

CHECK STATE AND LOCAL HIGHWAY SAFETY LAWS REGARDING

PERMITTED HITCH MOUNTED ACCESSORIES

Q_RACK_COMPACT_12033_1000_Layout 1 11/13/14 10:15 AM Page 1

11132014101603

The Trusted Source

Figure 1 Figure 2

THIS IS DESIGNED FOR A CLASS II RECEIVER

THE RACK IS RATED FOR A MAXIMUM OF 300 LBS

CONSULT & NEVER EXCEED LESSER OF VEHICLE, RECEIVER

OR TRAILER MAXIMUM TOW OR WEIGHT RATINGS.

DO NOT BLOCK TAILLIGHTS OR LICENSE PLATE WITH CARGO LOAD.

CONSULT AND FOLLOW ALL LIMITATIONS & WARNINGS IN YOUR

VEHICLE OWNERS MANUAL AND SAFE TOWING SUPPLEMENT.

SECURELY FASTEN LOAD TO CARGO CARRIER. ATTACH STRAPS

AND/OR TIE DOWN HOOKS TO THE TUBULAR FRAME OF CARGO RACK.

DO NOT CARRY ANY LOADS WIDER THAN YOUR VEHICLE.

TO REDUCE RISK OF SERIOUS INJURY OR PROPERTY DAMAGE:

INSTALL ACCORDING TO INSTRUCTIONS. TORQUE AND RECHECK

FASTENERS AFTER 250 MILES AND FREQUENTLY THEREAFTER.

INSPECT AND DO NOT USE RECEIVER/BUMPER IF DAMAGED.

Before You Begin Installation:

Congratulations on your purchase of a

Quadratec Cargo Receiver Rack. This

version is specifically designed for use

with a 2” receiver style hitch.

When unpacking, check to make sure all

parts are included and not damaged due

to shipping. If any part is missing or

broken, please call Customer Service at

800-745-6037 as soon as possible.

As cargo racks tend to be bulky, we

suggest you get help for steps involving

lifting, locating or holding the rack as-

sembly during installation.

Thank you again for your purchase

and let’s start the installation process.

a hazardous situation which, if not avoided, could result in death or

serious injury. You CAN be KILLED or SERIOUSLY HURT if you don’t

follow instructions.

a hazardous situation which, if not avoided, could result in minor or

moderate injury. You CAN be moderately HURT and also may suffer

property damage if you don’t follow instructions.

Careful attention is required to this instruction or operation but does

generally not relate to personal injury. Damage to your Quadratec®

product or other property may result if you don’t follow instructions.

A Few Words About Product Safety:

Your Receiver Mounted Cargo Rack is

intended to enhance the utility and en-

joyment of your off road capable vehicle.

Before installation, please take a mo-

ment to review the following safety in-

formation, assembly and installation

instructions. Important safety

information is generally preceded by

one of three signal words indicating the

relative risk of injury.

The signal words mean:

Q_RACK_COMPACT_12033_1000_Layout 1 10/31/14 11:33 AM Page 2

10312014113410

The Trusted Source

Put on safety glasses. Align mounting

holes on the ends of the Right and Left

rack halves (B) with the mounting holes

along the sides of the Main Tube (A).

Fasten the Rack Halves to the Main

Tube using the M10 Bolts (G), Washers

(H), and Nylock Nuts (I).

Set the Cross Brace (C) over the Rack

Halves (B) and fasten the Cross Brace

to the Halves using the M8 Bolts (E),

Washers (F), and Lock Nuts (G). Attach

the 2” Receiver Tube (J) to Main Tube

(A) with the remaining M10 Bolts (G),

M10 Washers (H), and Nylock Nuts (I).

Use 13 & 14mm wrenches or sockets to

tighten the M8 bolts, and two 17mm

wrenches or sockets to tighten the M10

Bolts securely. Finally, insert the End

Cap (K) into Main Tube (A).

Compact Cargo Rack Kits Contents:

PARTS LIST:

A) 2” Main Tube QTY 1

B) Cargo Rack Halves QTY 2

C) Cross Brace QTY 1

D) M8 x 35 Bolt QTY 2

E) M8 Washer QTY 4

F) M8 Nylock Nut QTY 4

G) M10 x75 Bolts QTY 6

H) M10 Flat Washer QTY 12

I) M10 Nylock Nut QTY 6

J) 2” Receiver Tube QTY 1

K) Plastic End Cap QTY 1

Hitch Pin & Cotter Pin One Each

Note: Only finger tighten bolts until

Carrier is fully assembled.

REQUIRED TOOLS:

Safety Glasses

17mm Wrench & Socket

13mm Wrench or Socket

14mm Wrench or Socket

Assembly Instructions:

Q_RACK_COMPACT_12033_1000_Layout 1 11/13/14 10:15 AM Page 3

11132014101603

The Trusted Source

Cargo Rack Installation:

The fully assembled rack should

appear as shown above.

Install the rack into your 2” receiver

hitch and secure with the supplied

5/8” receiver pin and cotter pin.

This convenient design allows swing-

open tailgate access, when cargo is

not installed in the rack.

Instructions Part #12999.3018

Q_RACK_COMPACT_12033_1000_Layout 1 11/12/14 9:32 AM Page 4

11122014093308

Otros manuales de Accesorios para automóviles de Quadratec

Quadratec

Quadratec 16053.5300 Manual de usuario

Quadratec

Quadratec QuadraTop 11051.0415 Manual de usuario

Quadratec

Quadratec 16400.0010 Manual de usuario

Quadratec

Quadratec 11081.02 Series Manual de usuario

Quadratec

Quadratec QuadraTop Manual de usuario

Quadratec

Quadratec JL Manual de usuario

Quadratec

Quadratec 97109.2002 Manual de usuario

Quadratec

Quadratec 12052.0904 Manual de usuario

Quadratec

Quadratec 12057.014 Series Manual de usuario

Quadratec

Quadratec QuadraTop Adventure Top 1113.00 Series Manual de usuario

Quadratec

Quadratec QuadraTop Adventure Top S With Flip Back... Manual de usuario

Quadratec

Quadratec 14117.0008 Manual de usuario

Quadratec

Quadratec 12033.1001 Manual de usuario

Quadratec

Quadratec EXPOSED RACKS Manual de usuario

Quadratec

Quadratec 12057.0261 Manual de usuario

Quadratec

Quadratec Rock Sliders Manual de usuario

Quadratec

Quadratec QuadraTop 11028.0235 Manual de usuario

Quadratec

Quadratec QuadraTop 11113.2435 Manual de usuario

Quadratec

Quadratec Ski & Snowboard Rack Manual de usuario

Quadratec

Quadratec QuadraTop Adventure Top S Manual de usuario

Quadratec

Quadratec 13111.0401 Guía rápida

Quadratec

Quadratec QuadraTop 11113.1135 Manual de usuario

Quadratec

Quadratec QuadraTop 11000.1135 Manual de usuario

Quadratec

Quadratec QuadraTop Adventure Top S Manual de usuario

Manuales populares de Accesorios para automóviles de otras marcas

James Baroud

James Baroud Odyssey Manual de usuario

Motorola

Motorola i50sx Manual de usuario

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manual de usuario

Feniex

Feniex T3 Manual de usuario

Renault

Renault 77 11 423 180 Manual de usuario

Kia

Kia E8300-4D000 Manual de usuario

Brink

Brink 756843 Manual de usuario

Whispbar

Whispbar K085W Manual de usuario

v.link

v.link CI-VL2-PC-HSD Manual de usuario

Viking

Viking Stack-Rack Guía de configuración rápida

Aries

Aries 203015 Manual de usuario

Choetech

Choetech AT0005 Manual de usuario

ZZ2

ZZ2 ZZAIR-PRO Manual de usuario

Holman

Holman 4A80L Manual de usuario

Thule

Thule 2075 Manual de usuario

Motorola

Motorola T325 Manual de usuario

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guía de instalación

DV8

DV8 FBJL-02 Manual de usuario