Qtx RP4 Manual de usuario

www.avsl.com 154.111UK User Manual

RP4

4-Channel DMX Relay Pack

Item ref: 154.111UK

User Manual

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

www.avsl.com 154.111UK User Manual

Introduction

The RP4 4 channel DMX relay pack has 4 DMX channels each with 2 IEC power outputs per channel. It

completely turns the power on and off saving energy and preserving the lifespan of your light effects. This is

ideal for use with LED light effects, which when used with traditional dimmer packs turn on and off randomly

with the pulsed voltage sent through the system.

Features

•4 DMX channel output

•Power ON/OFF for each channel

•DIP switch DMX addressing

•Wall mountable

Warning before use

This item is for Professional use only. Please take note of the following instructions before using this device.

• This unit must be earthed.

• Do not turn on the power until all connections are securely made.

• Always disconnect from the mains before replacing any fuse

• There are no user serviceable parts inside

Fuses

The RP4 can carry maximum overall load of 10 amps. Each channel can also carry a maximum overall load of 10 amps

but the unit is factory fitted with 10amps on each channel. These can be changed but the maximum overall load and

each channel load must not exceed 10 amps. You must be professionally qualified in order to carry this out.

Layout

IEC Power outputs (2 x IEC per channel)

Power on/off switch

DMX input XLRM

DMX loop output XLRF

Channel fuses

AC power inlet

DIP switch settings

www.avsl.com 154.111UK User Manual

Operation

DIP Switch settings

DIP switch ON

Setting

DMX control - Set start address using DIP switches 1- 9

Channel 1 ON

DIP switch 10 is OFF

Channel 2 ON

Channel 3 ON

Channel 4 ON

The RP4 can be used as a 4 Channel DMX switch pack or for standalone operation:

Stand alone: Set DIP switch 10 to OFF then use switch 1 to 4 to turn on / turn off each channel

DMX Mode: Set DIP switch 10 to ON and use DIP switches 1 - 9 to set the DMX start address.

In DMX mode, 4 channels (starting at the selected start address) can be used to turn on or turn off each channel by

adjusting the slider accordingly (000/0% = OFF, 255/100% = ON)

Specifications

Power supply

230Vac, 50Hz

Power outlets

4 x 2 x IEC

DMX Channels

Dimensions

193 x 72 x 260mm

Weight

2.5kg

This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at

the end of its useful life. The goods must be disposed of according to your local council guidelines

Errors and omissions excepted.

Taylor Road, Trafford Park, Manchester. M41 7JQ. North Point Bus. Park, New Mallow Road, Cork, Ireland.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de iluminación de Qtx

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario