QOLSYS QS-6110-P01 Manual de usuario

Convenience on a keychain

IQ FOB QUICK INSTALL GUIDE

SPECIFICATIONS

The IQ Pendant is a safe and reliable way to ensure you have help at the press of a button.

Emergencies are usually a surprise, and being near your panel or phone to call for help is not a

guarantee.

The IQ Pendant comes with a “Heartbeat” LED that blinks every minute to assure user. This fully

sealed water resistant pendant has a typical battery life of 4-6 years.

Housing Dimensions: 1.5”H x 1.2”W x .6”D

Compatibility Replaces: 60-578-95 (soap on a rope) Panic

and 60-906-95 Micro Panic.

Button Function: Press=Fault, Release=Restore!

Supervisory Signals: sent every hour.

Transmitter frequency: 319.5 MHz

Water Resistant: Not submersible, but tested to 1 meter

depth.

Operating Temperature: 0°F~120°F

Battery: Sealed unit; not replaceable.

This is a quick guide for experienced installers only. Refer to http://dealers.qolsys.com (login required)

LEARN

INTO

PANEL

Document#: IQDW-QG-03-17

Revision#: 3/8/17

Issue Date: MAR 2017

Qolsys Product #: QS-6110-P01

STEP

The heartbeat

LED blinks every

60 seconds.

The unit will send

a low battery

signal to notify

user.

STEP

TRIGGERING

YOUR

SYSTEM

TESTING

YOUR

SYSTEM

Press the red

button down in

an emergency.

This pendant can

be worn on the

wrist or around

the neck.

Place your panel in

“autolearn" mode

Customize name and settings

as desired and and touch “ADD”

ADD

Press and hold the button

to “tamper” the device

TechSupport@Qolsys.com

Qolsys Inc. proprietary.

Reproduction without permission is not permitted.

FCC ID: U5X-RE103

IC: 8310A-RE103

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired

operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference

that may cause undesired operation of the device.

Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas provoquer d'interférences et (2) cet appareil doit accepter toute

interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil.

CONTACT TECH SUPPORT

GOT QUESTIONS?

Otros manuales de Sistema de seguridad de QOLSYS