Qlogic SANbox 9000 Series Manual de usuario

[Quick Start Guide ]

QUICK START GUIDE

FIBRE CHANNEL SWITCH INSTALLATION

SANbox®9000 Series

for Windows®Operating Systems

Purchasers of OEM products should consult with the OEM for support.

Support Headquarters QLogic Corporation

12984 Valley View Road

Eden Prairie, Minnesota 55344-3657

USA

QLogic Web Site www.qlogic.com

Technical Support Web Site support.qlogic.com

Technical Support Email [email protected]

Technical Training Email [email protected]

North American Region

Email [email protected]

Phone +1-952-932-4040

Fax +1 952-974-4910

Europe, Middle East, and Africa Region

Email [email protected]

Phone Numbers by Language +353 1 6924960 - English

+353 1 6924961 - Français

+353 1 6924962 - Deutsch

+353 1 6924963 - Español

+353 1 6924964 - Português

+353 1 6924965 - Italiano

Asia Pacific Region

Email [email protected]

Phone Numbers by Language +63-2-885-6712 - English

+63-2-885-6713 - (Mandarin)

+63-2-885-6714 - (Japanese)

+63-2-885-6715 - (Korean)

Latin and South America Region

Email [email protected]

Phone Numbers by Language +52 55 5278 7016 - English

+52 55 5278 7017 - Español

+52 55 5278 7015 - Português

Quick Start Guide

Installation Instructions

Congratulations on your purchase of the SANbox®9000 Series Fibre Channel Switch. This guide describes the steps to

install and activate your new switch using a Windows® workstation. For advanced options and instructions (including

Solaris®, Linux®, and Mac OS X®installations), refer to the SANbox 9000 Series Stackable Chassis Switch Installation

Guide on the product CD.

NOTE: Do not apply power to the switch until instructed in Step 4.

Step 1. Verify the Package Contents

The SANbox 9000 Series Fibre Channel Switch is shipped with the following items:

1 SANbox 9000 Series Fibre Channel Switch

2 AC Power cords

1 Rail kit

1 RJ-45/RS-232 console adapter

1 Enterprise Fabric Suite 2007 CD

NOTE: Transceivers and stacking cables, if you ordered them, are packaged separately.

Step 2. Mount the Switch

WARNING!! Two people are required to safely lift and install the switch into a rack. To avoid personal injury or damage

to the switch, arrange for assistance.

You can mount the SANbox 9000 Series switch on a flat surface or in a rack. Allow minimum clearances of 2 inches in

front and 8 inches in the rear for cabling.

❑For a rack mount, install the SANbox 9000 Series rail kit in a standard 19" rack as described in the SANbox 9000

Series Stackable Chassis Switch Rack Mounting Guide that is packaged with the switch.

Step 3. Install Transceivers

An SFP transceiver is required for each switch port that will be connected to a device.

❑To install an SFP transceiver, insert the transceiver into the switch port and gently press until it snaps in place. The

transceiver will fit only one way. If the transceiver does not install under gentle pressure, flip it over and try again.

Step 4. Apply Power to the Switch

The maximum current requirements are 10 amps at 100 VAC or 4.2 amps at 240 VAC.

❑Attach the AC power cords to the Power Supply blades

and wall outlets or power strips. Secure the strain

relief bales to the plugs. Place the On/Off switches in

the On position.

❑The switch runs its self tests and begins normal

operation – this may take a few minutes. Observe the

Maintenance Panel and verify that the CPU0 blade

Heartbeat LED is blinking about once per second and

the Chassis Fault LED is NOT illuminated.

Step 5. Verify Workstation Requirements

❑Verify that your workstation can support the Enterprise Fabric Suite 2007™ application with the following minimum

requirements:

Windows® 2003 SP1/SP2/R2 and XP

256 MB memory minimum; 512 MB recommended

150 MB disk space

1 GHz processor

Video card with 256 colors

CD ROM drive, RJ-45 Ethernet port

Internet Browser: Microsoft®Internet Explorer®5.0, Netscape Navigator®6.0, Firefox®1.0, or Mozilla™ 1.5

Java®2 Standard Edition Runtime Environment 1.4.2

❑The default IP address of a new switch is 10.0.0.1. Ensure that your workstation is configured to communicate

with the 10.0.0 subnet.

CHASSIS

GOOD LED

CPU0

HEARTBEAT

LED

CHASSIS

FAULT LED

Step 6. Connect the Workstation to the Switch

❑Connect the CPU0 blade Ethernet port directly to the workstation using an Ethernet cable, or indirectly through a

switch or hub. The Ethernet port automatically discovers straight and cross-over cables. You must have a live

Ethernet connection when the workstation powers up.

NOTE: The Maintenance Panel Ethernet ports on the front of the switch are disabled and should not be used for the

initial installation. You can enable the Maintenance Panel Ethernet ports after the switch is operational.

Step 7. Install Enterprise Fabric Suite 2007

The Enterprise Fabric Suite 2007 application includes the Configuration Wizard. This wizard auto-detects and configures

the switch based on selected options and recommended settings. To install the Enterprise Fabric Suite 2007 application

on a Windows workstation/server, perform the following steps:t

1. Insert the Enterprise Fabric Suite 2007 disk into the CDROM drive.

2. Select the Enterprise Fabric Suite 2007 tab at the top of the screen.

3. Click Agree in response to the End User License Agreement.

4. Select Install for Windows 2003, XP.

5. Double click the Windows_6.08.xx.exe file to begin installation.

6. Enter the serial number and license key provided to activate the Enterprise Fabric Suite 2007

application.

If the product introduction screen does not open, open the CD with Windows Explorer and run the installation program

with the following path:

Switch_Manager\Windows_6.08.xx.exe

Step 8. Obtain Network Configuration

❑Obtain the IP address and subnet mask from your network administrator. Be sure that your workstation is configured

for the same subnet.

CPU0 BLADE

ETHERNET PORT

Step 9. Run the Configuration Wizard

❑Double-click the Enterprise Fabric Suite 2007 shortcut, or select Enterprise Fabric Suite 2007 from Start menu,

depending on how you installed it.

❑The Configuration Wizard tool auto-detects and configures the switch based on selected options and recommended

settings. Follow the instructions to set network parameters and the password. The default user name is admin; the

default password is password.

NOTE: If you are using an Ethernet switch and the auto-connect process fails due to a time out, try a direct connection

from your workstation to the switch using an Ethernet cross-over cable.

Step 10. Connect Devices and Switches

❑Connect fiber optic cables between the installed transceivers and their corresponding devices. Each port

auto-negotiates the proper port type with the connected device or switch.

Congratulations

You have successfully installed your QLogic SANbox 9000 Series Switch

registered trademarks of QLogic Corporation. Microsoft , Windows, and Internet Explorer are registered trademarks of

the Microsoft Corporation. MacOS X is a registered trademark of Apple Computer, Inc. Linux is a registered trademark

of Linus Torvalds. Mozilla and Firefox are trademarks or registered trademarks of the Mozilla Foundation. Netscape

Navigator is a registered trademarks of Netscape Communications Corporation. Java and Solaris are registered

trademarks of Sun Microsystems, Inc. All other brands and product names are trademarks or registered trademarks of

their respective owners. Information supplied by QLogic is believed to be accurate and reliable. QLogic Corporation

assumes no responsibility for any errors in this brochure. QLogic Corporation reserves the right, without notice, to

makes changes in product design or specifications.

*50688-03 A*

JQLogic Corporation 26650 Aliso Viejo Parkway Aliso Viejo, CA 92656

949.389.6000 www.qlogic.com

50688-03 A

Otros manuales para SANbox 9000 Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de Qlogic

Qlogic

Qlogic SANbox 9100 Guía de instalación y uso

Qlogic

Qlogic SANbox 5600 Series Manual de usuario

Qlogic

Qlogic SANbox 5602 Manual de usuario

Qlogic

Qlogic SANbox 5600Q Instrucciones de funcionamiento y mantenimiento

Qlogic

Qlogic SANbox2 SANbox2-64 Manual

Qlogic

Qlogic SANbox 5800V Series Manual de usuario

Qlogic

Qlogic SANbox 5602 Manual

Qlogic

Qlogic SANbox 5602 Manual de usuario

Qlogic

Qlogic SANbox 9000 Series Manual de usuario

Qlogic

Qlogic SANbox 3810 Manual de usuario

Qlogic

Qlogic SANbox 5600 Series Manual

Qlogic

Qlogic SilverStorm 9040 Manual de usuario

Qlogic

Qlogic SANbox 1400 Series Manual de usuario

Qlogic

Qlogic SANbox 5802V Manual de usuario

Qlogic

Qlogic SANbox 3810 Manual de usuario

Qlogic

Qlogic SANbox 5802V Manual de usuario

Qlogic

Qlogic SilverStorm 9020 Manual de usuario

Qlogic

Qlogic InfiniBand 12200-BS01 Manual de usuario

Qlogic

Qlogic SANbox 3810 Manual de usuario

Qlogic

Qlogic SANbox 5800V Series Manual de usuario

Qlogic

Qlogic SANbox2-16 Fibre Channel Manual de usuario

Qlogic

Qlogic SANbox 3050 Manual de usuario

Qlogic

Qlogic SANbox 1400 Series Manual de usuario

Qlogic

Qlogic SANbox 5600 Series Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario