q-Tech NETQ-6000 Instrucciones de funcionamiento y mantenimiento
NETQ-6000
Quick Installation Manual
BRIDGE - REPEATER
Enterprise High Power Outdoor Wireless Access Point
NETQ-6000
PC Laptop IPAD
NETQ-6000
quick installation manual bridge-repeater
1
Thank you for purchasing Enterprise High Gain wireless Router. This manual
will instruct you how to configure router, and enable you to use it in a perfect
status.After you have installed the router, you will be able to enjoy the surfing
feely.
1.1. Wireless Router Connection
Below diagram is the connection instruction
Reset: Press it for 5-10 seconds, then, the router return to its default
configuration.
Wan: Wan connectin
LAN1-LAN4: LAN Connection to connect PC by cable.
Power: for Power supply
If use router by cable, the correct connecting way is as below:
NETQ-6000
quick installation manual bridge-repeater
2
1. Connect PC to one of the lan ports
2. Connect router’s Wan Port to ADSL Modem. Please do this only after you
have finished the router configuration, to avoid any installation issues. This is
very important. Please do it accordingly
3. If you already connect router to ADSL Modem, then, please firstly
disconnected it, then, reset wireless router.
1.2. configuration on PC end
Before configuring wireless router, firstly, do some configuration on the PC
who manages the router.
A. Switch on PC, click on right ‘My Network Place’, then click on right the
“local area connection”->“properties”-> “Internet protocol（TCP/IP）” and
“Properties”.
NETQ-6000
quick installation manual bridge-repeater
3
B, Click “General ” ,Select “Obtain an IP address automatically” and “Obtain
DNS server address automatically”, then click OK.
NETQ-6000
quick installation manual bridge-repeater
4
1.3. log in wireless router
A. Connect the configured PC to one of the four lan ports of router. Do not
connect router to any other devices. (this is to avoid any IP address chaos),
and switch on the router
B. Start PC’s Internet Explorer, and enter http：//192.168.1.1, press enter.
C. Users will see the following login page, Enter admin for the User Name
and Password, both in lower case letters. Then click the OK button or press
the Enter key.
D. Then, enter the configuration page of the AP, and select the operation
NETQ-6000
quick installation manual bridge-repeater
6
Put the password, and lock the AP, then, click the apply
NETQ-6000
quick installation manual bridge-repeater
7
2.1. Wlan Settings
Please choose any one broadband setting method of below 3
2.1.1. ADSL（PPPOE）dial-up settings
As example of China Telecom ADSL with below related details provided by
telecom operator.
Password××××××××
Please fill in user name and password provided by telecom operator as
picture.
NETQ-6000
quick installation manual bridge-repeater
8
3.1. Wireless Settings
Here you can amend router SSID and make encryption
Pls write down the right SSID and security method in above picture( It is
better to choose WPAPSK with secutiry), click finish to share the network.
A. If you want to share the network by wifi after the basic setting, pls click
wireless network connection in My Network Places, right click Wireless
Network Connection and choose View Availale Wireless Networks
NETQ-6000
quick installation manual bridge-repeater
9
Remarks: if you computer with build in 802.11b/g/n wireless USB adapter,
and can’t search the available network, pls contact with after-sale department
of your computer seller.
With Wireless network connection: Right-click Network Neiborhood and
choose Nature，only local connections or other connections, but no wireless
network connection in the network connection type
Without Wireless network connection: right-click "Wireless Network
Connection" select "Properties" tab, only "normal" and "Advanced", no
"Wireless Network Configuration", even if you normally connect the wireless
in other places.
B. Click "Refresh network list" on the top left, the computer will search some
wireless networks and listed on the right, select the right SSID you want to
connect, then Double-click to connect, if the router with passwords, input the
passwords, Click Connect tab too access the Internet through wireless.
Otros manuales de Reloj de repetición de q-Tech
