Pyronix Enforcer V10 Manual de usuario
Wireless Alarm System
User Guide
RINS1902
Document SAP: 102015108-03
Alarm Panel
Time 10:09 c
2
Enforcer V!0 User Guide
Contents
ProControl+ 4
Setting Devices 5
The Wireless Panel Keypad 5
Wireless Keyfobs 5
Locking the Keyfob 5
Setting the System 6
Using a PIN Code or Proximity Tag 6
Using the Wireless Keyfob 6
Unsetting the System 7
Using a PIN Code or Proximity Tag 7
Using the Wireless Keyfob 7
Unsetting after an Alarm 7
Using a PIN Code or Proximity Tag 7
Using the Wireless Keyfob 8
Fault Indications & Unable to Set 8
Fault Indications 8
Control Panel 8
Unable to Set 8
Control Panel Indication 8
Keyfob Indication 8
Advanced Functions 9
Chime 9
Omitting Inputs 9
Keypad Hold Up 9
Master Manager Mode Overview 10
Entering Master Manager Mode 11
Exiting Master Manager Mode 11
Master Manager Mode Options 12
Set Time and Date 12
3
Enforcer V10 User Guide
Omit Inputs 12
Edit Users 13
Flexi-set 13
Adding a New User 13
Deleting a User 14
Change User 14
Change Master Manager Code 15
Review Logs 15
Wi-Fi Setup 15
ProControl+ Smart Device Application 16
Basic Controls 16
Connecting to the Panel 16
Intruder Alarm Homescreen 17
Advanced Controls 18
History 18
Setting/Unsetting Logs 19
Installation Information 20
Engineer Information 20
Input Table 20
Users 21
Standard Users 21
Guard, Duress and Dial Back Users 21
Notes 22
Extended User Guide 23
4
Enforcer V!0 User Guide
ProControl+
Connect to your home from anywhere
AES-256
Encryption
Set and unset your system
View your system status in real time, including: alarm, CO and
smoke detectors
Customise and receive push notifications from your system
Have instant access to your events and history log
Control appliances such as lights, garage doors, gates and
blinds
All using an encrypted, highly secure system, for extra peace
of mind that your family and home is safe and secure
https://apple.co/2N4DF51https://play.google.com/store/apps/
details?id=com.mcu.Pyronix&hl=en
5
Enforcer V10 User Guide
Setting Devices
The Wireless Panel Keypad
a= Exits the Master Manager menu and selects Area
A when setting.
b= Moves backwards in the Master Manager menu
and selects Area B when setting.
c= Enables chime, displays additional information
in the event log, and selects Area C when setting.
d= Moves forward in the log, scrolls between
options, enters the Master Manager menu and selects Area D when setting.
fp= Not used.
[]= Directional buttons and enables/disables functions.
f= Enters menus and accepts programming preferences.
h= Cancels items, resets the panel and moves to next item in a menu item.
Wireless Keyfobs
The wireless keyfob has four buttons that may be programmed for specic purposes, these
options are programmed in the ‘EDIT USERS?’section.
Locking the Keyfob
All four buttons on the keyfob may be locked so that any accidental presses will not aect
your wireless alarm system. For example, this protects the buttons from being pressed
accidentally if a keyfob is in someone’s pocket.
OR OR
5 seconds 5 seconds
6
Enforcer V!0 User Guide
Setting the System
Using a PIN Code or Proximity Tag
Enter a valid PIN code or present a valid tag to the
symbol as shown.
Enter Your Code
[******]
Enter the area you wish to set and press f.
‘Please wait setting wireless’will be displayed.
Set Areas?[A ]
There are three dierent setting methods your
installer will instruct you through:
Final Door: Leave the building and make sure the
exit door is closed properly.
Timed: Make sure you leave the building before the
timer shown on the keypad expires.
Push to set: Press the push to set button installed by
your engineer to set the system.
Please leave via
Exit Route
Using the Wireless Keyfob
To set via a keyfob. Pressand hold for more than 2 seconds.
The keyfob LED will start to ash green indicating that the system
is starting to set.
‘Please wait setting wireless’ will be displayed on the keypad and
the programmed area will begin to set.
To ‘quick set’, press and hold thekey again for four seconds.
Once set, the keyfob LED will illuminate RED indicating that the
system is now set.
<2 seconds
7
Enforcer V10 User Guide
Unsetting the System
Using a PIN Code or Proximity Tag
Enter the building, the ‘entry time’will start. ENTRY TIME [30]
Enter a valid PIN code or present a valid tag to the
symbol as shown.
Enter Your Code
[******]
The area that the code is assigned to will be unset. Alarm Panel
Time 10:09 c
Please note: If ‘exi-set’is disabled then the system will automatically unset that level set once a valid user
code or tag is presented.
Using the Wireless Keyfob
To unset via a keyfob. Press .
The keyfob LED will ash green indicating that the system has
unset.
Please note: Unsetting with a keyfob will only be allowed if your engineer
has enabled this.
<2 seconds
Unsetting after an Alarm
Using a PIN Code or Proximity Tag
Enter a valid PIN code or present a valid tag to the
symbol as shown.
Enter Your Code
[******]
The alarm symbol will ash indicating there has
been an alarm activation and the keypad will
display which input has activated.
Alarm Silenced
Lounge
Press hto reset the system. Alarm Panel
Time 10:09 c
8
Enforcer V!0 User Guide
Using the Wireless Keyfob
To unset via a keyfob. Press .
The keyfob LED will start to ash green indicating that the system
has unset.
Resetting the system after an alarm can only be done at the keypad.
Please note: Unsetting with a keyfob will only be allowed if your engineer
has enabled this.
<2 seconds
Fault Indications & Unable to Set
Fault Indications
Control Panel
Any faults that occur on the system will be easily
recognised by the ashing ALERT LED.
Alarm Panel
Time 10:09 c
To see what the fault is, enter a valid PIN code, or
present a valid tag, or press on the keyfob.
Depending on how the system has been set up by
your engineer, it may be possible to set the system
with a fault, to do this press f.
Control Panel
Battery Fault
Please note: Any fault may aect the overall performance of your alarm control panel and therefore your
engineer should be contacted for further assistance if any fault is active.
Unable to Set
Control Panel Indication
If‘unable to set’is displayed, it indicates that an input
is open and the area where the input is should be
checked for open windows, pets, movement etc.
If the problem cannot be solved contact your
engineer, or omit the input.
Unable To Set
Input 01
Keyfob Indication
If the panel is unable to set for any reason, the keyfob status LED ashes amber indicating a
fault is on the system.
9
Enforcer V10 User Guide
Advanced Functions
Chime
The chime can be used for any input on the system.
This can be set up by your engineer.
To enable the chime on the keypad, when the time
is displayed, press c.
‘c’ will be displayed on the right side of the keypad
display. Press cagain to clear the chime feature.
Alarm Panel
Time 10:09 c
Omitting Inputs
On occasion, a detector may need to be isolated if
a room is occupied.
Enter your User Code.
Press f.
Select the inputs that need to be omitted’
Press a.
After 10 seconds the exit time continues.
Omit Day Al [01]
Please note: Inputs have to be programmed as omittable by your engineer for this feature to operate.
Keypad Hold Up
A ‘hold up’ alarm will be generated when 1and
7are pressed and held down for 2 seconds (this
time period can be altered by your engineer).
Alarm Silenced
2 Key HU
Please note: The keyfob can also be programmed to initiate a hold up alarm. All hold up alarms including
duress codes must be enabled by the engineer.
10
Enforcer V!0 User Guide
Master Manager Mode Overview
The Master Manager Menu has the following functions:
Please note: The options visible will depend on which modem is installed in the panel.
Set Date and Time
Programs the date and time.
Operate User Outputs
Activates/deactivates user automation outputs that are used to remotely activate devices,
such as electronic gates & lights.
Omit Inputs
Omits inputs programmed as ‘Day Alarm’ only.
Edit Users
Adds/Edits/Deletes User PIN codes, tags and keyfobs.
Review Logs
Displays all event log information.
SMS Phonebook
If SMS texting is enabled, there can be up to 10 mobile numbers programmed to send SMS
alarms. Please discuss this feature with your installer if required.
Please note: Third party SIM cards only.
Voice Phonebook
Edits the telephone numbers that the panel is programmed to send voice messages to.
Set Up App Data
If the ProControl+ App has been enabled, this function will control the settings.
Wi-Fi Setup
Adds or changes a Wi-Fi connection with your router.
Walk Test
Tests each input.
Siren Test
Tests all external sounders (wired or wireless).
Tabla de contenidos
Otros manuales de Sistema de seguridad de Pyronix
Pyronix
Pyronix Paragon Super Manual de usuario
Pyronix
Pyronix EURO 46 APP Manual de usuario
Pyronix
Pyronix Enforcer 32WE Manual de usuario
Pyronix
Pyronix RINS1902-2 Manual de usuario
Pyronix
Pyronix Paragon E Instrucciones de instalación
Pyronix
Pyronix PCX 256 Manual del propietario
Pyronix
Pyronix ENFORCER Series Manual del propietario
Pyronix
Pyronix EURO 46 V10 Manual de usuario
Pyronix
Pyronix PCX-12 Manual de usuario
Pyronix
Pyronix XD15TT Manual de usuario
Pyronix
Pyronix STERLING 10 Manual de usuario
Pyronix
Pyronix XDL12TT-AM Manual de usuario
Pyronix
Pyronix 256 Guía del usuario
Pyronix
Pyronix Matrix 424 Manual de usuario
Pyronix
Pyronix OCTAGON II Manual de usuario
Pyronix
Pyronix PCX 256 Manual de usuario
Pyronix
Pyronix HOMECONTROLHUB Manual de usuario
Pyronix
Pyronix Enforcer 32-W Manual de usuario
Pyronix
Pyronix PCX 46 Manual de usuario
Pyronix
Pyronix Enforcer Manual de usuario
Manuales populares de Sistema de seguridad de otras marcas
EDM
EDM Solution 6+6 Wireless-AE Manual de usuario
Highway Safety Group
Highway Safety Group EA401 Manual de usuario
Siren
Siren LED GSM Manual de usuario
Detection Systems
Detection Systems 7090i Instrucciones de montaje
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manual de usuario
Siemens
Siemens FDM273 Manual de usuario