Pyle PPHP1241WMU Manual de usuario
PPHP1241WMU
Wireless&PortableLoudspeaker
Active PA Speaker System Kit, Built-in
Rechargeable Battery (12" Subwoofer, 1000 Watt)
INDEX
Operation.................................................................................................................. 2
User’s General Instructions ....................................................................................... 3
Controls and Connections ................................................................................... 4
Specifications ............................................................................................................ 6
CAUTION:
TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER [OR BACK]
THIS PRODUCT MUST BE EARTHED
NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL
OPERATION
1.
Prior to switching ON, turn volume down to minimum.
2.
Connect the audio source to the appropriate input socket.
3.
Connect to the mains supply.
4.
Switch ON the audio source followed by the active speaker.
5.
Set the volume with the applicable control.
6.
Adjust the bass +treble.
7.
When using the speaker using the built-in battery, if you find the MP3 screen
flickering which indicates the battery voltage is low, turn OFF the speaker box
and charge battery.
8.
If you don't use the unit frequently, please do remember to charge the unit
every three months to keep the battery in good condition.
Note:
Please turn OFF the product when fully charged.
2
www.PyleUSA.com
INSTRUCTIONS
•
Do not overload the box to avoid damage to the speakers.
•
Do not place to an open fire (candles etc) on top or next to the box-
FIRE HAZARD
•
Only connect to an earthed mains outlet of 110Vac/60Hz.
•
For indoor use only. If the box will be used outdoors, you need to make sure
that no humidity can enter the box.
•
When not in use, unplug the unit from the mains.
•
Unplug the unit from the mains prior to checking or replacing the fuse.
•
Make sure that the box is placed on a stable, strongsurface.
•
The boxes can be hung. Use only strong and approved mounting material.
During the mounting, make sure that nobody is standing below the mounting
area.
•
Do not place liquids on the box and protect it against humidity. Humidity can
shorten the life time considerably.
•
Only use suitable means of transportation if you want to move the box -
USE EXTRA CAUTION HANDLING THE BACK PANEL.
•
Always unplug the unit during a thunderstorm or when it is not in use.
•
If the unit has not been used for a long period of time, condensation can occur
inside the housing. Please let the unit reach room temperature prior to use.
•
Never try to repair the unit yourself.
It does not contain any user serviceable parts.
•
Run the mains lead in such a way that nobody can fall over it and nothing can
be put in it
•
Set the unit to the lowest volume prior to switching iton.
•
Keep the unit out of the reach of children.
3
www.PyleUSA.com
CONTROLS AND CONNECTIONS
1.
LED Screen
2.
Mp3 control
3.
SD Card Slot
4.
USB PORT
5.
Bass Control
6.
Treble Control
7.
ECHO EFFECT FORMICROPHONE
8.
Mic Level: It is used to adjust the
signal levelfrom the microphone input
9.
Master Volume: It is used to adjust
the signal levelfrom the Mp3/Line input
10.
Mp3 Level: It is used to adjust the
signal level from the Mp3
11.
Guitar Level: It is used to adjust the
signal level from the Guitar input
12.
Mic input: 6.35mm Jack for a
microphone input
13.
RCA Line input
14.
Microphone Select: Press it to power
ON/OFF
the wire microphone
15.
3.5mm AUX input
16.
RCA line output
17.
6.35mm Guitar input
18.
B-VOL: It is used to adjust the signal
level of B wireless microphone
19.
Wireless Mic power LED
20.
Chanel B wireless Mic power LED
21.
A-VOL: It is used to adjust the
signal level of A wireless microhpne
22.
Chanel A wireless Mic power LED
23.
Wireless microphone antenna
24.
Wireless microphone select:
Press it to power ON/OFF the
wireless microphone
25.
ON/OFF
Power switch
26.
Battery charge switch
27.
External Power DC 12V Input
28.
AC Power: Connect the
incorporated AC power cord
29.
Batterry Electric quantity
Instructions Change – Low
electronic- full electronic
4
www.PyleUSA.com
PPHP1241WMU
Wireless & Portable Loudspeaker
Active PA Speaker System Kit, Built-in Rechargeable Battery
(12" Subwoofer, 1000 Watt)
Features:
•
Versatile High-Powered Mobile Cabinet Speaker System
•
Rugged, Durable & Reliable Sound
•
Speaker System: 12'' Woofer, 1''Tweeter
•
Compression Driver with TitaniumDiaphragm
•
Built-in Rechargeable Battery
•
2-Way Full Range Audio Projection
•
Built-in Digital Audio Amplifier
•
RCA (L/R) Stereo Line InputConnectors
•
RCA (L/R) Stereo Line OutputConnectors
•
Connect & Stream Audio from External Devices
•
USB Flash Drive & SD Memory Card Readers
•
USB Reader Doubles as Device Charging Port
•
FM Radio with Digital LCDDisplay
•
ID3 Tag Song Readout Info: LCD Displays Song Title/Song Artist
•
Rear Panel Rotary Dial & Button Control Center
•
Master Volume, Mic Volume, Echo, Treble, Bass Setting
•
(2) 1/4'' Microphone Inputs
•
Convenient Carry Handles
•
35mm Speaker Stand Mount
•
Engineered Heavy Duty ABS Housing
6
www.PyleUSA.com
What's in the Box:
•
PASpeaker
•
Wireless Handheld Microphone
frequency：UHF 600.85MHz – 606.025MHz
Modulation mode：Broadband FM
Frequency interval：300KHz
Frequency stability：±0.005%
Dynamic range：100dB
Maximum modulation：±45KHz
Audio frequency response：80Hz~18KHz（±3dB）
Integrated signal to noise ratio：＞105dB
Composite distortion：≤0.5%
Working environment temperature：0℃~＋40℃
Maximum output level：±10dBV
Transmitter indicator
Antenna：Handheld, microphone built‐in spiral antenna
Output power：High power 10mW
Spurious rejection：－60dB
Power supply：Two 5th 1.5VAA batteries
•
Headset Microphone
•
Beltpack Transmitter
•
Remote Control
•
Power Cable
Technical Specs:
•
Max Power Output: 10 mW
•
Amplifier Class: D
•
Impedance: 4 Ohm
•
T.H.D.: <0.5%
•
Sensitivity: 95dB (+/-2dB)
FCC warning:
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
This device complies with Part 74 of the FCC Rules. Operation is subject
to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interferenc
ethat may cause undesired operation.
NOTE 1: The manufacturer is not responsible for any changes or mo
difications not expressly approved by the manufacturer for compliance,
such modifications could void the user’s authority to operate the
equipment.
NOTE 2: This device complied with FCC radiation exposure limits as
set forth for an uncontrolled environment. This device should be
installed and operated so that its antenna(s) are not co‐
located or operating in conjunction with any other antenna or transmitt
er
Otros manuales para PPHP1241WMU
1
Tabla de contenidos
Otros manuales de Oradores de Pyle
Pyle
Pyle PGRDSP62BTB Manual de usuario
Pyle
Pyle PLMRWB65LEW Manual de usuario
Pyle
Pyle PBKSP33BK Manual de usuario
Pyle
Pyle PMP48IR Manual de usuario
Pyle
Pyle PWMA130 Manual de usuario
Pyle
Pyle PWMA825BT Manual de usuario
Pyle
Pyle PWMA-930I Manual de usuario
Pyle
Pyle BUBBLE VIBE PWPBT05 Manual de usuario
Pyle
Pyle PWMA-370 Manual de usuario
Pyle
Pyle PSUFM1288B Manual de usuario
Pyle
Pyle Pentagon PLMRW10 Manual de usuario
Pyle
Pyle PHPD82A Manual de usuario
Pyle
Pyle PWMA1050 Manual de usuario
Pyle
Pyle PADH15BTA Manual de usuario
Pyle
Pyle pkrk10 Manual de usuario
Pyle
Pyle aqua sunblast PWR95S Manual de usuario
Pyle
Pyle PHP18DJT Manual de usuario
Pyle
Pyle PKRK210 Manual de usuario
Pyle
Pyle PPHP844B Manual de usuario
Pyle
Pyle PWMA-1090UI Manual de usuario
