Pyle PDICBT57 Manual de usuario
WirelessBTStreaming
Wall/CeilingSpeakerSystem
PDICBT57- Dual 5.25" Speakers
PDICBT67- Dual 6.5" Speakers
PDICBT87- Dual 8.0" Speakers
www.PyleUSA.com
2
REAR SPEAKERS
IN-CEILING
Proper placement of the speakers is an
important step in obtaining the most realistic
soundstage possible. These recommendations
are for the optimum placement of the loud
speakers. Use these placement recommenda
tions as a guide. Slight variations will not
diminish your listening pleasure.The front speakers should be placed the
same distance from each other as they are from the listening position. They
should be placed at about the same height from the oor as the listener’s
ears will be, with the tweeters aimed toward the listener at ear-level height.
In a home theater conguration, the two surround, speakers should be
placed slightly behind the listening position and ideally should face each
other and be at a level higher than the listener’s ears. If that is not possible,
they may be placed in a wall (or in the ceiling) behind the listening
position, facing forword. The surround speakers should not call attention to
themselves. They should provide a diuse, ambient sound accompanying
the main program material heard in the front speakers. In Dolby*Digital and
DTS systems, aim the tweeters toward the listening position at ear-level
height.
5-6FT
LL
A
WLLAWL
L
AWLLAW
Speaker Power Supply Connection:
The active speaker features the power supply for the speaker system. You
may choose to use the included power supply adapter to connect directly
into the active speaker's power supply input. *Optional power supply
connection can be made by directly 'hard-wiring' power supply cables to
the speaker's power supply screw terminal post -- as pictured, also located
on the active speaker.
www.PyleUSA.com
3
+-
Plug-in Power
Adapter Input
*Optional Power
Source Input
Active Speaker
Passive Speaker
www.PyleUSA.com
4
Speaker Connection (Active-to-Passive)
Create the daisy-chain style speaker connection to allow speaker-to-
speaker audio communication output. The included speaker wire is used to
connect the active speaker to the passive speaker. Ensure proper speaker
connection wiring between the speakers.
+-
Active Speaker
Passive Speaker
www.PyleUSA.com
5
Bluetooth Pairing
Once the speakers are installed and powered -- search the Bluetooth
network name " Pyle Audio USA" on your device. Ensure the Bluetooth
Receiver Switch is set to ON position -- as located on the active speaker.
If you are prompted for a password, enter '0000' (4 zeroes).
+-
Active Speaker
Passive Speaker
Bluetooth
Receiver Switch
Pencil
Measuring tape
Carpenter’s level
Phillips #2 screwdriver
Utility knife
Awl
6
INSTALLATION
TOOLS NEEDED
The in-wall/in-ceiling speakers were designed to be easily installed.
However,if you are unsure of your ability to properly install these loud
speakers please contact your dealer or a qualied installer.
1. Cut the drywall
Note: Always allow at least one-half inch between a wall stud and the
speaker cutout or the locking tabs will not be able to swivel into place.
2. Connect the speaker wires to the speaker
www.PyleUSA.com
7
3. Screw down each of the four Phillips head screws.The locking tabs will
swivel into place and secure the unit to the rear surface of the drywall.
Put in the strips of adhesive to secure the grill.
4. Replace the metal grill. 5. Complete
TROUBLESHOOTING
IF THERE IS NO SOUND FROM ANY OF THE SPEAKERS:
• Check that receiver/amplier is on and a source is playing.
• Check all wires and connections between receiver/amplier and
speakers. Make sure all wires are connected. Make sure none of the
speaker wires are frayed, cut, punctured or tounching each other.
• Review proper proper operation of your receiver/amplier.
IF THERE IS NO SOUND COMING FROM ONE SPEAKERS:
• Check the “Balance” control on your receiver/amplier.
• Check allwires and connections between receiver/amplier and speakers.
Make sure all wires are connected. Make sure none of the speaker wires
are frayed, cut, punctured or tpunching each other.
www.PyleUSA.com
8
IF THERE IS LOW (OR NO) BASS OUTPUT:
• Make sure the connections to the left and right “speaker Inputs” have the
correct polarity (+ and -).
• Consider adding a powered subwoofer to your system.
• In Dolby Digital or DTS modes, make sure your receiver/processor is
corectly congured. When using a subwoofer, make sure the subwoofer
output of the receiver/processor has been enabled. If no subwoofer is
being used, make sure the left and right front and rear speakers have
been congured as “LARGE” See your receiver/processor’s owner’s manual
for futher information on correct speaker conguration in Dolby Digital,
DTS and other surround sound modes.
IF THE SYSTEM PLAYS AT LOW VOLUME BUT SHUTS OFF AS VOLUME IS
INCREASED:
• Check all wires and connections between receiver/amplier and
speakers. Make sure all wires are connected. Make sure none of the
speaker wires are frayed, cut, punctured or touching each other.
• If more than one pair of main speakers is being used,check the minimum
-impedance requirements of your receiver/amplier.
PDICBT57 - PDICBT67 - PDICBT87
Wireless BT Streaming Wall / Ceiling Speaker System
MODEL PDICBT57 PDICBT67 PDICBT87
Sound System 5.25’’ Speaker
+ 1’’Tweeter
6.5’’ Speaker
+ 1’’Tweeter
8.0’’ Speaker
+ 1’’Tweeter
MAX Power
Output 240 Watt 300 Watt 400 Watt
Eciency 86dB 88dB 90dB
Frequency
Response 100Hz-20kHz 70Hz-20kHz 50Hz-20kHz
Total Speaker
Size
7.8’’ Diameter,
3.0’’ Depth
9.4’’ Diameter,
3.9’’ Depth
10.7’’ Diameter,
4.6’’ Depth
Cut-Out Size 7.0’’ Diameter,
2.9’’ Depth
7.9’’ Diameter,
3.7’’ Depth
9.6’’ Diameter,
4.4’’ Depth
www.PyleUSA.com
9
Features:
• Includes (2) Speakers (Active + Passive)
• Bluetooth Wireless Music Streaming Ability
• 2-Way Full Range Stereo Sound
• Built-in Digital Sound Amplier
• Mounts Flush to Walls or Ceilings
• Screw Terminal Block Speaker Connectors
• Ability to Daisy-Chain Speakers for Stereo System Sound
• Environmentally Friendly ABS Construction
• Perfect for Custom Installations & Applications
Bluetooth Connectivity:
• Includes Bluetooth Control Receiver
• Stream Wireless Audio from Your Connected Device
(Smartphone, Tablet, Laptop, Computer, etc.)
• Bluetooth Network Name: ‘Pyle USA’
• Bluetooth Network Password: ‘0000’ (4 Zeroes)
• Bluetooth Version: 3.0
• Wireless Range: Up to 40’+ ft.
What’s in the Box:
• Active Speaker
• Passive Speaker
• 12V Power Adapter
• Speaker Connection Cable, 16’ft.
Technical Specs:
• Impedance: 8 Ohm
• Power: 100/240V, 12V Power Adapter
• Sold as: Pair
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Sistema de altavoces de Pyle
Pyle
Pyle PWMA170 Manual de usuario
Pyle
Pyle PPHP1049KT Manual de usuario
Pyle
Pyle PPHP816WMU Manual de usuario
Pyle
Pyle PSBVWF300 Manual de usuario
Pyle
Pyle PWMA8601 Manual de usuario
Pyle
Pyle PPHP849KT Manual de usuario
Pyle
Pyle PHP28DJT Manual de usuario
Pyle
Pyle PKWMA210 Manual de usuario
Pyle
Pyle PWMA230BT Manual de usuario
Pyle
Pyle PWMA50B Manual de usuario
Pyle
Pyle Vintage PTTCSM70BT Manual de usuario
Pyle
Pyle PLMRS4W Manual de usuario
Pyle
Pyle PWMA1090UI Manual de usuario
Pyle
Pyle PPHP82SM Manual de usuario
Pyle
Pyle PSBT85A Manual de usuario
Pyle
Pyle PPHP81LTB Manual de usuario
Pyle
Pyle PWPSB2402 Manual de usuario
Pyle
Pyle PLMRKT9 Manual de usuario
Pyle
Pyle PPHP126WMU Manual de usuario
Pyle
Pyle PPHP28BA Manual de usuario
Manuales populares de Sistema de altavoces de otras marcas
Sondpex
Sondpex Active Speaker System and Digital Music... Manual de usuario
JVC
JVC NX-PN7 Manual de usuario
Marshall Amplification
Marshall Amplification AR-DM61-BT Manual de usuario
Yamaha
Yamaha NX-A01 - Speaker Sys Manual de usuario
SE Audiotechnik
SE Audiotechnik I-LINE Manual de usuario
Gemini
Gemini WRX-843 Series Manual de usuario