Pyle P2001BT Manual de usuario

www.PyleUSA.com

Safety Instructions

CAUTION: To reduce the risk of electric shock, DO NOT ATTEMPT TO OPEN

THE AMPLIFIER OR REMOVE THE COVER. There are no user serviceable parts

inside - please use a qualied technician for all servicing.

WARNING: To prevent electrical shock or re hazard ,this amplier should

not be exposed to rain or moisture. Do not place objects lled with liquid,

such as vases, on the amplier.

WHEN USING ELECTRICAL PRODUCTS, CAUTION SHOULD ALWAYS BE USED.

PLEASE READ AND KEEP THESE SAFETY INSTRUCTIONS.

Precaution

1. Power Source

The unit should be connected to a power supply AC-115V/60Hz,

AC-230V/50Hz.

2. Ventilation

The unit should be situated so that its location or position does not

interfere with its proper ventilation. Place the unit at least 10cm away

from the walls.

3. Water and Moisture

The unit should not be used near water-for example, near a swimming

pool in a wet basement, etc.

4. Electric Shock

If a metal object, such as hair pin or needle comes into contact inside this

unit, a dangerous electric shock may result. For families with children,

never permit children to put anything, especially metal, inside this unit.

Intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure that may

be strong enough to create a risk electric shock to a person.

Intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the

literature accompanying the product.

www.PyleUSA.com

5. Enclosure Removal

Never remove the enclosure. If the internal parts are touched accidentally,

a serious electric shock might occur.

6. Abnormal Smell

If an abnormal smell or smoke is detected, immediately turn the power

OFF and pull out the power cord. Contact your dealer or nearest service

station.

FRONT PANEL

1. POWER SWITCH: Press to switch the power unit ON or OFF.

2. : This knob is used to select the preview station which has been kept

in system.

3. RPT button: Repeat music control

4. : This knob is used to select the next station which has been kept in

system.

5. EQ button control for Hall, Live, Jazz, Rock, Pop, Normal.

6. : play/pause song button on USB/SD card

7. AM/FM SELECTOR

8. Mode switch button for input choice like USB/SD/BT/FM

9. Source Input OPTI/COAX

10. FUNCTION DISPLAYED FLUORESCENT WINDOW

11. SUB. VOLUME CONTROL

12. LED DIMMER

13. MASTER VOLUME CONTROL: Adjusts the blue lights and blue rings.

Adjusts the volume level. Turn the knob clockwise to increase the volume.

14. ECHO CONTROL: Turn the knob to adjust the MIC echo level.

467 81018

1191

20 117 114 111 1

116 115 1211

23 24

3 5 9

www.PyleUSA.com

15. TREBLE: Adjusts the master treble

16. BASS: Adjusts the master bass

17. MIC VOLUME: Adjusts the volume level. Turn the knob clockwise to

increase the MIC volume .

18. USB/SD: Card input

19. MIC INPUT JACKS 1 & 2 KARAOKE MIC: Connect to these jacks.

20. HEADPHONE JACK: Headphone connect to this jack.

21. INPUT SELECTOR: Turn this button to choose the favorable input

22. USB CHARGE SELECTOR

23. BT ANTENNA

24. REMOTE CONTROL WINDOW

25. AUX 1 Input

BACK PANEL

1. TUNER ANT: Connect for AM and FM antennas.

2. AUDIO INPUT JACKS:

Connect the audio output jacks of CDNCD/DVD, AUX to these jacks.

3. SUB-WOOFER OUTPUT JACKS 1 & 2: Connect IPOD/MP3 to this jack.

4. LINE OUTPUT JACKS: Connect the line input jacks to these jacks.

5. A SPEAKER OUTPUT TERMINALS: Connect your speaker system to these

terminals.

6. B SPEAKER OUTPUT TERMINALS:

Connect your the other speaker system(s) to these terminals.

7. COOLING FAN

8. 115V/230V SWITCH: According to power voltage, push this button to the

station of the 115V or 230V.

9. POWER CORD: Connect to AC 115V/60Hz & 230V/50Hz outlet.

10. WIRELESS MIC ANTENNA

10 1

www.PyleUSA.com

STEPS FOR CONNECTING WITH WIRELESS BT DEVICE

A. Press MODE button under the LCD display screen and enter into Wireless BT

mode.

B. Search on the Wireless BT device and you can fnd the Wireless BT name

"PYLE PRO"

C. Select the "PYLE PRO" Wireless BT name and wait for the device to pair.

D. The unit will make a signal to confrm that the device has successfully paired

and the screen will display "BLUETOOTH CONNECTED"

E. Once being paired, you can play music from your BT device. You can also use

the control buttons on the unit to select the tracks from your BT device.

AM/FM

ANTENNA

www.PyleUSA.com

Remote Control

A. Remote control should be operated within 6 meters with a scope of 30°

in front of the receiver.

B. Make sure that there is no large obstacle between the remote control and

the machine.

C. Remote sensor should be far away from the light, high amounts of light

can aect its performance.

1. Standy By Button

2. Equalizer Button:

(HaII, Live, Jazz, Rock, Pop, NormaI)

3. Previous Song Button:

Short press for previous music;

Press and hold for fast backward

4. Source Input Volume -

5. MODE:

Menu Control Button

Press to select BT/USB/SD/AM/FM/

LINE IN etc. audio input

6. MUTE Button

7. Source Input Volume +

8. SCAN Button

9. Next Song Button:

Short press for next music;

Press and hold for fast forward

10. Play/Pause Button

11. Repeat Song Button:

Repeat one music or repeat all

12. Number Buttons for Song Selection

www.PyleUSA.com

How to replace the preset radio stations?

Use the remote control to set the radio stations.

NOTE: The preset stations can't be deleted, BUT CAN BE REPLACED.

Operations Steps

1. Press TUNER MODE on the remote control

2. Press AM/FM, and select FM

3. Press PRE/NEXT to select the stations you don't want to keep

4. Press TUNING again, choose the radio stations you want to keep

5. Press MEMORY to save the new stations.

In this way, you can replace the preset radio stations.

SAFETY INSTRUCTIONS

1. Make sure that all connections are properly connected and the main

volume is set to minimum level before turning ON the unit.

2. When more than one pair of speakers are used, (specially the main

speaker output) make sure that the speakers used are of the same wattage

and impedance, otherwise the unit maybe damaged under high power or

long term operation.

3. To avoid humming sounds and unwanted noise, make sure that all the

wires are properly inserted

4. For speaker cords, strip o the vinyl coating and twist the wire tip.

Push down the pink jack or loosen the screw terminal, before inserting the

wire tip, then fasten it and tighten the screw. Be careful not to let the wires

stick out ofthe terminal otherwise this may cause a short circuit when

wires of dierent terminal contact each other.

5. After the unit is turned ON, adjust the main volume to the desired level

same with the bass and treble volume, etc.

www.PyleUSA.com

P2001BT

Home Theater Amplier Receiver with Wireless BT

Multi-Channel Pro Audio Stereo Pre-Amplier with USB Charge & Digital Optical/

Coax, MP3/USB/SD Readers, FM/AM Radio, Rack Mount (2000 Watt)

Features:

• Home Theater Audio Receiver System

• High-Powered Hybrid Pre-Amplier

• Multi-Channel Source Audio Selection

• Built-in Bluetooth for Wireless Music Streaming

• Digital LCD Display with AM/FM Radio

• Dual USB Device Charge Ports

• Connect & Stream Audio from External Devices

• MP3 Audio File Playback Support

• USB Flash & SD Memory Card Readers

• Aux (3.5mm) Input Jack

• (2) 1/4’’ Microphone Inputs

• Headphone Jack, 1/4’’ -inch

• RCA (L/R) Audio Input/Output Jacks

• Dedicated Subwoofer Output

• Screw-Type Speaker Terminal Binding Posts

• Front Panel Button & Rotary Control Center

• LED Backlight Illumination with Dimmer Control

• Microphone & Volume Audio Conguration Settings

• Integrated Overload & Short Circuitry Protection

• Universal Rack Mount Design

• Built-in Cooling Fan

What’s in the Box:

• Hybrid Pre-Amplier

• Detachable Rack-Mount Brackets

• FM/AM Antenna/BT Antenna

• Remote Control

• Power Cable

www.PyleUSA.com

Wireless BT Connectivity:

• Built-in Receiver for Wireless Audio Music Streaming

• Simple & Hassle-Free Pairing

• Works with All of Today’s Latest Devices

(Smartphones, Tablets, Laptops, Computers, etc.)

• Wireless BT Version: 5.0

• Wireless BT Network Name: ‘PYLE PRO’

• Wireless Range: 40’+ ft.

Technical Specs:

• Power Output: 2000 Watt MAX

• 600 Watt @ 2 Ohm

• 300 Watt @ 4 Ohm

• 200 Watt @ 8 Ohm

• Frequency Response: 40Hz-15kHz, +/-2dB

• S/N Ratio: >76dB

• T.H.D.: <1%

• Radio Station Memory Presets: 30

• Digital Media File Playback Support: MP3/WMA/WAV/FLAC/APE

• Maximum USB/SD Flash Memory Support: Up to 64 GB

• Battery Operated Remote: Requires (1) x ‘CR-2025’ Battery

• Power Cord Length: 4.5’ft.

• USB Power: (2) 5V/2A

• Power Supply: 115/230V, Switchable

• Unit Dimensions (L x W x H): 18.89’’ x 12.04’’ x 3.14’’ –inches

www.PyleUSA.com

P3001BT

Wireless BT Hybrid Amplier Receiver

Multi-Channel Pro Audio Stereo Pre-Amplier with USB Charge & Digital Optical/

Coax, MP3/USB/SD Readers, FM/AM Radio, Rack Mount (2000 Watt)

Features:

• Home Theater Audio Receiver System

• High-Powered Hybrid Pre-Amplier

• Built-in Bluetooth for Wireless Music Streaming

• Digital LCD Display with FM/AM Radio

• Connect & Stream Audio from External Devices

• MP3 Audio File Playback Support

• USB Flash & SD Memory Card Readers

• Dual USB Device Charge Ports

• Front Panel Button & Rotary Controls

• LED Backlight Illumination with Dimmer Control

• RCA (L/R) Audio Input/Output Jacks

• Dedicated RCA (L/R) Subwoofer Output Jacks

• Screw-Type Speaker Terminal Binding Posts

• Headphone Jack, 1/4’’ -inch

• Aux (3.5mm) Input Jack

• (2) 1/4’’ Microphone Inputs

• Microphone Volume/Tone/Echo Control

• Audio Source Conguration Settings

• Built-in Cooling Fan

• Universal Rack Mount Amplier Design

What’s in the Box:

• Hybrid Pre-Amplier

• Remote Control

• Rack-Mount Brackets

• Power Cable

• FM/AM Antenna/BT Antenna

Otros manuales para P2001BT

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Receptor de Pyle

Pyle

Pyle PLR31MP Manual de usuario

Pyle

Pyle PDWMG46 Manual de usuario

Pyle

Pyle PT260A Manual de usuario

Pyle

Pyle PLMRM4BTA Manual de usuario

Pyle

Pyle PLRVST400 Manual de usuario

Pyle

Pyle PTAUWIFI46 Manual de usuario

Pyle

Pyle PT980AUH Manual de usuario

Pyle

Pyle PT798SBA Manual de usuario

Pyle

Pyle PSLSW4 Manual de usuario

Pyle

Pyle P3301BAT Manual de usuario

Pyle

Pyle PDWM17BT Manual de usuario

Pyle

Pyle PT696BT Manual de usuario

Pyle

Pyle Power Sports PLMRBT19 Manual de usuario

Pyle

Pyle PBMSPRG3 Manual de usuario

Pyle

Pyle PT592A Manual de usuario

Pyle

Pyle PT588AB Manual de usuario

Pyle

Pyle PPRE70BT Manual de usuario

Pyle

Pyle PWA25WIFIBT Manual de usuario

Pyle

Pyle PLMR90UW Manual de usuario

Pyle

Pyle PLR21MPF Manual de usuario

Pyle

Pyle PBMSPG2BK Manual de usuario

Pyle

Pyle PT6000CH Manual de usuario

Pyle

Pyle PD1000BA Manual de usuario

Pyle

Pyle PWPBT47 Manual de usuario

Manuales populares de Receptor de otras marcas

Garmin

Garmin GA 23 Manual de usuario

Aiphone

Aiphone PS-12F Manual de usuario

IMES

IMES TCS-01CA-PMI Manual de usuario

BWI Eagle

BWI Eagle AIR-EAGLE SR Manual

AMIMON

AMIMON AMN12310 WHDI Manual de usuario

Dual

Dual DMCPA79BT Instrucciones de funcionamiento

Sound Associates

Sound Associates SA652P Manual de usuario

Sherwood

Sherwood NewCastle R-772 Manual de usuario

Audio

Audio A10-RX Series Manual de usuario

AllSee

AllSee PushShare PSRV1.1 Manual de usuario

DEMAG

DEMAG DRC-DR D2 Manual de usuario

Teleco

Teleco TVRCL868A02 Manual de usuario

Bosch

Bosch RF3222E Manual de usuario

Kramer

Kramer 631R Manual de usuario

Xpress

Xpress xmc10 Manual de usuario

JVC

JVC KD-MR1BTS Manual de usuario

Omega Engineering

Omega Engineering UWTC-REC3 Manual de usuario

e-survey

e-survey E300 Pro Manual de usuario