Pyle PDRMKIT72N Manual de usuario

13''3-PieceKids/JuniorDrumSet

Metallic Drum Set with Throne, Cymbal, Pedal,

Bass Drum, Tom and Drumsticks

www.PyleUSA.com

CONTENTS CHECKLIST

First, check the contents of the package

and make sure you have everything you need.

ASSEMBLY INSTRUCTIONS

1. Take out all the parts from the package and remove the packing bags.

1. Bass Drum Head

2. Drum Mute Mat

3. Cymbal

4. Snare drum

5. Tom Tom

6. Bass drum

7. Accessory Box

8. Pedal

9. Bass Drum Bolts

10. Bass Drum Spur

11. Cymbal Holder

12. Drum Tuning Keys

13. Pedal Heads

14. Throne Pedestal

15. Tom / Snare Drum Holder

16. Drumstick

17. Throne seat

www.PyleUSA.com

2. Take all the accessories from the accessories box 7.

3. Set up the seat from 14 and 17.

13 14

Seat

Wing bolt

www.PyleUSA.com

4. Set up the pedal from 8 and 13.

5. Set up the bass drum: take out the bass drum no. 6, remove one side bolt

and hoop

www.PyleUSA.com

Put the washers on the bass drum boles and put the drum head on.

Please pay attention the logo position when you put the drum head on.

Using the tuning key to make the drum head tight. Please pay attention that,

don’t tighten one screw too tight without tightening other screws. The correct

way is tighten one screw a little, and then tighten the opposite screw a little,

then tighten the besides screw a little, then tighten the left screw a little. Then

tighten again by this turn.

www.PyleUSA.com

6. Set up the bass drum spur 10. Insert it inside the slot of the bass drum in both

side.

7. Put the bass drum on the oor and adjust the length of the bass drum spur.

www.PyleUSA.com

8. Set up the cymbal holder 11 and tom/snare drum holder 15 on the bass drum.

9. Set up the cymbal.

10. Set up the tom drum on the right, snare drum on the left. Put the logo on

drum head in the correct position as picture.

Set up the pedal on the bass drum hoop by using the screw as below picture.

11. Finish

12. If you are afraid it is too loud to annoy your neighborhood, you could put the

drum mute mat no. 2on the drum head.

www.PyleUSA.com

Setting drum mute mat method as below:

1. For snare drum and tom drum, you could just put the mute mat on the drum

head.

2. For cymbal, you need to take the screw and upper felt out, and put the mute

mat instead.

3. Set up the bass drum mute mat. At rst, tear the

adhesive tape and stick it on the bass drum.

4. Finish

Take this upper

felt out

Questions? Issues?

We are here to help!

Phone: (1) 718-535-1800

Email: suppor[email protected]

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Tambor de Pyle

Pyle

Pyle PTEDRL12 Manual de usuario

Pyle

Pyle PED-021M Manual de usuario

Pyle

Pyle PTED06 Manual de usuario

Pyle

Pyle PED03 Manual de usuario

Pyle

Pyle PTEDK50 Manual de usuario

Pyle

Pyle PTED01 Manual de usuario

Pyle

Pyle PED02M Manual de usuario

Pyle

Pyle PTED01 Manual de usuario

Pyle

Pyle PTEDRL11 Manual de usuario

Manuales populares de Tambor de otras marcas

Yamaha

Yamaha RX-21 Manual de usuario

Roland

Roland TD-9K Manual de usuario

Sudoku

Sudoku LEXUS Manual de usuario

Roland

Roland CR-80 Manual de usuario

V-Drums

V-Drums V-Tour TD-9KX2 Manual de usuario

Yamaha

Yamaha DTXPLORER Manual de usuario

Cherub

Cherub WRW-206 Manual de usuario

Opti-Med

Opti-Med JM-D1 Series Manual de usuario

Roland

Roland CR-80 Manual de usuario

Yamaha

Yamaha DTS70 Manual de usuario

Yamaha

Yamaha DTXPRESS Manual de usuario

Roland

Roland RM-2 Manual de usuario

ATV

ATV aD5 Manual de usuario

Alesis

Alesis DM Pro Kit Manual de usuario

Roland

Roland TR-808 Manual de usuario

Roland

Roland SPD-20 Manual de operación y mantenimiento

Koma Elektronik

Koma Elektronik RH 301 Manual de usuario

Roland

Roland TR-8 Manual de usuario