Pyle PIWIPDK2 Manual de usuario
PIWIPDK2
iPod/iPhone In-Wall Mounted Audio Docking Center
w/Wireless Remote
http://www.pyleaudio.com
Installation Guide.
For the easiest possible installation, please read and follow these tips.
1. You’ll need a Cat5 (Ethernet) cable for the audio and power.
2. For best results, do not use the Ethernet (RJ-45) jack on the output box — you should not crimp
RJ-45 connectors onto the Cat5 cable. Instead, separate the wires by color and use a Cat5 punch
down tool to individually connect each wire to the white connector. The order, from bottom to top,
is as follows: brown-stripe, brown, green-stripe, green, orange-stripe, orange, blue-stripe, blue.
Tabla de contenidos
Otros manuales de Estación de acoplamiento de Pyle
Pyle
Pyle PIPADK3 Manual de usuario
Pyle
Pyle Ipod Docking Station PIP30 Manual de usuario
Pyle
Pyle Ipod Docking Station PiDK1 Manual de usuario
Pyle
Pyle PIPADK2 Manual de usuario
Pyle
Pyle PHST80IP Manual de usuario
Pyle
Pyle PHSCI20B Manual de usuario
Pyle
Pyle PIWIPDK1 Manual de usuario
Pyle
Pyle PICDLD82I Manual de usuario
Pyle
Pyle PICD65I Manual de usuario
Pyle
Pyle PSBM60I Manual de usuario
