Pyle PLMRMP2A Manual de usuario
www.PyleUSA.com
1
Enjoy convenient music streaming from a universal mount audio system
with the Pyle Compact Marine Amplier Kit. It’s compact, waterproof
design allows for exible mounting possibilities, and makes it simple to
expand the audio system capabilities for vehicle.
PLMRMP2A
FEATURES:
• 2 x 150 Watts RMS at 4 ohm
• 2 x 300 Watts MAX at 4 ohm
• 2 x 300 Watts RMS at 2 ohm
• Anti-Thump Turn- On
• Soft Turn On / O
• Adjustable High / Low Level Inputs
• RCA Line Input
• Power Protection Circuitry
• Volume Gain Remote Control
• T.H.D S/N Ratio : > 95 dB
• Channel Separation : > 65 dB
• Frequency Response : 10 – 40K Hz
• Fuse : 10 A
• Dimensions : 4.21''(L) x 3.50''(W) x 2.05''(H)
ACCESSORIES:
• IPod / MP3 / Waterproof 3.5mm Stereo to RCA Adaptor
• Remote Control for Volume Gain
• Sold as : Unit
www.PyleUSA.com
2
PLMRMP4A
FEATURES:
• 4 x 150 Watts RMS at 4 ohm
• 4 x 300 Watts MAX at 4 ohm
• 4 x 300 Watts RMS at 2 ohm
• Anti-Thump Turn- On
• Soft Turn On / O
• Adjustable High / Low Level Inputs
• RCA Line Input
• Power Protection Circuitry
• Volume Gain Remote Control
• T.H.D S/N Ratio : > 95 dB
• Channel Separation : > 65 dB
• Frequency Response : 10 – 40K Hz
• Fuse : 10 A
• Dimensions : 6.18''(L) x 3.50''(W) x 2.05''(H)
ACCESSORIES:
• IPod / MP3 / Waterproof 3.5mm Stereo to RCA Adaptor
• Remote Control for Volume Gain
• Sold as : Unit
WHAT IS INCLUDED?
When rst unpacking your new amplied marine speaker system, Please
check rst that the package contains all of the items below. If something
is missing, contact the store where you purchased the product.
PLMRMP2A
One Piece 2 Channel Waterproof Marine Power Amplier
One Piece iPod / MP3 Waterproof 3.5mm Stereo to RCA Adaptor
One Piece Remote Control for Volume Gain
PLMRMP4A
One Piece 4 Channel Waterproof Marine Power Amplier
One Piece iPod / MP3 Waterproof 3.5mm Stereo to RCA Adaptor
One Piece Remote Control for Volume Gain
Installation Precautions
Before you drill or cut any holes, investigate your vessel’s layout very
carefully. Take special care when you work near the gas tank, fuel lines,
hydraulic lines and electrical wiring.
Never operate the amplier when it is unmounted. Attach all audio
system components securely within the amplier to prevent damage,
especially in an accident.
Do not mount this amplier so that wire connections are unprotected.
in a pinched condition, in contact with any metal surfaces in your
marine vessel, or likely to be damaged by nearby objects.
Before making or breaking power connections in your system,
disconnect the marine vessel battey. Conrm that your hear unit or
other equipment is turned o while connecting the input jacks and
speaker terminals.
If you need to replace the power fuse, replace it only with a fuse
identical to that supplied with the amplier, Using a fuse of a dierent
type or rating may result in damage to your audio system or your
amplier which is not covered by the manufactuer’s warranty.
Don’t misuse the level control!
Do not mistake the input level control for a volume control! It is
designed ONLY to match the output level of your audio source to the
input level of your amplier.
Do not adjust this input level of maximum unless your input level
requires it.
Ignoring these instructions will result in an input overload to the
amplier, and excessive audio distortion. It can also cause the protection
circuit to engage.
www.PyleUSA.com
3
www.PyleUSA.com
4
Controls, Input and Output Cables:
The switches and gain settings are located behind a watertight plug,
which also lights up when the amplier is on. Be sure to replace the plug
when nished with adjustments
1. The INPUT LEVEL switch selects the input sensitivity of the amplier.
If you are connecting to a LINE level source (typically any RCA type
connection) then the switch should be in the LINE (out) position.
When connecting to loudspeaker outputs or headphone or high level
sources then set the switch to the SPEAKER (in) position.
2. The POLARITY switch allows the user to optimize bass performance in
the case that there are more than 1 set of loudspeakers producing
bass in the system. Play some music with strong bass content and
listen with the switch alternately in the NORMAL and REVERSE
position until it can be determined which setting results in more
pleasing bass response. If in doubt, or if any interaction with other
speakers is unlikely, then leave the switch in the NORMAL position.
1
2
3
4
5
dB GAIN
MIN MAX
+
3. The GAIN control adjusts the overall level of the amplier. When using
the amplier without volume control the level should beset to
achieve a balance with other loudspeakers in the system. As arule,
keep the gain setting as low as possible while still insuring that the
system will reach full output power. When using the system with
external volume control, set the external Volume Control to FULL
(clockwise) and adjust the gain on the amplier until full output
power is reached. Full output power level can be determined by
turning the gain control clockwise until the apparent loudness does
not appear to increase any more. Leave the control at the setting
where this begins to become apparent.
4. VOLUME CONTROL Plug for the waterproof remote volume control.
When installed, this control will turn o the PLMRMP3A Amp when
turned all the way down.
5. INPUT Stereo RCA audio input for connecting other audio devices
www.PyleUSA.com
5
www.PyleUSA.com
6
Power and Speaker Wiring
WIRE COLOR
Red
Black
Blue
White
Whire/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black
DESCRIPTION
Battery (+), 12dc
Barrery (-), Ground
Remote Turn On, 12vdc = ON
CH1 (+)
CH1 (-)
CH2 (+)
CH2 (-)
CH3 (+)
CH3 (-)
CH4 (+)
CH4 (-)
+
-
+
-
+
-
+
-
BATTERY
WHITE
WHITE/BLACK
GRAY
GRAY/BLACK
GREEN
PURPLE
PURPLE/BLACK
GREEN/BLACK
-
+
BLACK
RED
Accessory switch
BLUE
4-8 ohm speakers
Four Channel Marine Power Amplifier
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Amplificador de Pyle
Pyle
Pyle PTAU45 Manual de usuario
Pyle
Pyle PP555 Manual de usuario
Pyle
Pyle PDA69BU Manual de usuario
Pyle
Pyle PLMRC300X2 Manual de usuario
Pyle
Pyle PQ1000 Manual de usuario
Pyle
Pyle PLMRMP3A Manual de usuario
Pyle
Pyle PFA330BT Manual de usuario
Pyle
Pyle PT696BT Manual de usuario
Pyle
Pyle PLMRC500X1 Manual de usuario
Pyle
Pyle PWA20BT Manual de usuario
Pyle
Pyle PVC8U Manual de usuario
Pyle
Pyle PDSB15A Manual de usuario
Pyle
Pyle PWMA 100 Manual de usuario
Pyle
Pyle PREA90WBT Manual de usuario
Pyle
Pyle Blue Series Manual de usuario
Pyle
Pyle PDSB10A Manual de usuario
Pyle
Pyle PT730U Manual de usuario
Pyle
Pyle PWMA1003T Manual de usuario
Pyle
Pyle Hydra PLMRMP2A Manual de usuario
Pyle
Pyle PDA9HBU Manual de usuario
