Pyle PLCD54MP Manual de usuario
AM/FM/CD/MP3/USB/AUX Stereo Receiver, Single DIN,
30 Preset Memory Stations, LCD Display
with Remote Control (Black)
PLCD54MP
CD/MP3StereoReceiverPowerAmplifier
www.PyleUSA.com
2
CONTENTS
INTRODUCTION
What’s in the Box
DIMENSIONS
OVERVIEW OF THE COMPONENTS
GENERAL OPERATION
Power On/O
Removing The Front Panel
Volume Up And Down
Mute On/O
Changing The Modes
Setting The Audio/Menu
Display
Auxiliary Input Jack
Reset
RADIO OPERATION
Switch Between Europe/USA/Asian/Russian Frequency
Changing Bands
To Store / Recall Preset Stations
Manual Tuning
Seek Tuning
Automatic Store Preset Station
CD/USB OPERATION
Insert/Eject CD
USB Connection
Select Next Track Or Previous Track
Fast Forward/Reverse
Play/Pause
Introduction Scan
Repeating The Track
Playing All Tracks In Random
Folder/Track Navigation
WIRELESS BT OPERATION
Pair And Connect
Make A Call
Redial Last Dialed Number
Answer A Call
Reject A Call Or End A Call
Switch Audio Between Car Audio And Mobile Phone
Adjust Talk Volume Audio Streaming (A2DP)
APP OPERATION
SPECIFICATION
3
3
3
5
6
7
7
10
11
12
www.PyleUSA.com
3
INTRODUCTION
Do keep your original invoice and purchase receipt in a safe place in case
of future service and warranty claims. You may also contact your appointed
service agent for any future technicalsupport requirements.
What’s in the Box:
• Stereo Receiver
• Remote Control
Dimensions (Unit: mm)
1. 20
www.PyleUSA.com
4
WIRING CONNECTIONS
Violet
Purple/Black
Grey/Black
Gray
White/Black
White
Green/Black
Green
Red Ignition Line
Earth wire
ANT automatic
Power supply
Rear left horn (+)
Rear left horn (-)
Front left horn (+)
Front left horn (-)
Front right horn (+)
Front right horn (-)
Rear right horn (+)
Rear right horn (-)
Black
Blue
Yellow
COLOR FUNCTION
A
B
www.PyleUSA.com
5
COMPONENTS
OVERVIEW OF THE COMPONENTS
1. Power on/o, Mode (Source)
2. Volume knob, SEL (Push for Audio/Menu Setting)
3. AS (Auto Store Preset Station)
4. Mute
5. Preset #1, Play/Pause
6. Preset #2, Intro Scan
7. Preset #3, Repeat
8. Preset #4, Random
9. Preset #5, Folder Down, Jump 10 Track backward
10. Preset #6, Folder Up, Jump 10 Track forward
11. Answer Call, End Call (press and hold)
12. Tune/Track down, reverse
13. Tune/Track Up, fast forward
14. IR Remote Sensor
15. LCD Display
16. Band, Disp (Display clock time and other info)
17. USB Port
18. Aux Input Socket
19. Hands-free Microphone
20. Eject CD
21. Disc Slot
22. Reset
1
3 1214 1613
4
152219
17
18
20
21
www.PyleUSA.com
6
GENERAL OPERATION
Power On/O
• Press any button to turn the unit on.
• Press and hold the /MODE button to turn the unit o.
Removing The Front Panel
Press the RELEASE button to detach the front panel.
Volume Up And Down
Rotate the Volume knob to adjust the volume level.
Mute On/O
Briey press the button to toggle mute on or o.
Changing The Modes
Press the /MODE to select between Radio, Disc, USB (with USB device inserted),
AUX-IN (auxiliary input) and BT (Wireless BT) modes.
Seing The Audio/Menu
• Press Volume (SEL) button momentarily to select between the audio/
menu functions: BASS, TREBLE, BALANCE, FADER, EQ USER/FLAT/CLASSIC/
ROCK/POP, LOUD OFF/ON, BEEP OFF/ON, CLOCK 24/12, CLOCK SETTING,
BT MENU/AUTO, DISTANT/LOCAL, STEREO/MONO, AREA EU/US/AS/RU.
• Rotate the Volume knob to adjust or activate your desired function/audio.
Display
• With the unit on, press and hold DISP to display clock time.
• Press and hold DISP to toggle display between various displayed information.
Auxiliary Input Jack
Usinga 3.5mm cable to connecta external device such as MP3 players, CD
players etc. to the auxiliary input jack on front panel. Then you can hear the
sound of other playback devices such as MP3 players, CD players etc. through
your car speakers.
Reset
Push the RESET button (behind the front panel) with a thin object with a
pointed end to reset the unit back to the factory default settings 6 Second.
www.PyleUSA.com
7
RADIO OPERATION
Switch Befween Europe /USA/Asian/Russian frequency
In radio mode, press the Volume button momentarily to choose the“AREA EU/
US/AS/RU" item, then rotate it to switch between EU(europe), US (USA), AS
(Asian), RU(Russian) frequency. The system will change the frequency setting in
about 3 seconds.
Change Bands
In radio mode, shortly press the BAND/DISP to select between the FM1, FM2,
FM3 and AM1 (MW1), AM2 (MW2) bands.
To Store/Recoil Preset Stations
The radio can be stored 6 preset stations for each band (FM1, FM2, FM3, AM1
and AM2) for a total of 30 preset stations.
• To memorize a station:
Press and hold the desired preset buttons (1-6) to save a radio station.
• To recall a preset station:
Briey press the respective station button (1-6) to recall the corresponding
preset station.
Manual Tuning
In the radio mode:
Briey press the or button to search the next or previous frequency step
by step.
Seek Tuning
In radio mode:
Press and hold the or button to seek to next or previous strong station.
CD/USB OPERATION
Insert CD
With the label facing up, insert a standard size CD into the CD slot.
Playback will begin automatically.
Eject CD
Press (Eject button) to eject the CD.
www.PyleUSA.com
8
USB Connection
If you would like to playback les contained in a USB stick, please insert the
stick into the USB port. The MP3/WMA and other music les will be played
automatically.
Note: The USB port of this car radio is also designed for charging for iPhone/
andriod mobile phone. The charging current consumption is 1 ampere.
Select Next Track Or Previous Track
In the CD/USB mode, briey press the or button to play the next or
previous track.
Fast Forward/Reverse
Press and hold the or button to fast forward or reverse a track.
Play/Pause
Press the button to interrupt the CD/USB playback (pause function).
Press this button again to continue the playback.
Introduction Scan
Press INT to play the rst 10 seconds of each track on CD/USB.
Press again to cancel the INT function.
• INT ON - Plays the rst 10 seconds of each track.
• INT OFF - Cancels the INT function.
Repeating The Track
Press RPT to toggle between RPT FLD, RPT ALL, and RPT ONE.
• RPT FLD - Continuously repeats all les in current folder.
• RPT ALL - Plays all tracks on CD/USB device.
• RPT ONE - Continuously repeats selected track.
Playing All Tracks In Random
Press RDM to play songs in random order, press again to cancel the RDM
function.
• RDM ON - Plays all tracks in random order.
• RDM OFF - Cancels the RDM function.
1. (Power ON/OFF) Button
2. VOL +/VOL- (volume up/down)
3. Band button, (reply call)
4. button: Tune down, seek down;
Track down, fast reverse
5. SEL (selection) button
6. button: Tune up, seek up; Track up,
fast forward
7. Mute/DEL (Delete) button
8. CLK (clock setting) button,
(end call) button
9. button: preset station 1 button,
keypad 1
10. INT (intro) button,
preset station 2 button, keypad 2
11. RPT (repeat) button,
preset station 3 button, keypad 3
12. RDM (random), preset station 4 button,
keypad 4
13. -10 (previous 10 tracks),
preset station 5 button, keypad 5
14. +10 (next 10 tracks),
preset station 6 button, keypad 6
15. ST (stereo) button, keypad 7
16. LOUD (loudness) button, keypad 8
17. AMS (automatic music search) button,
keypad 9
18. MODE button, keypad
19. EQ (Equalizer) button, keypad 0
20. LOC (local)/DX button, keypad #
www.PyleUSA.com
9
Folder/Trock Navigotion
• Press the or button to select the previous or the next folder.
Folder access is only available on devices with more than one folder.
• Press and hold the or buttons to jump 10 tracks backward or forward.
It is required that over 10 tracks be available on the storage medium.
Remote Control
Name of buttons and location
www.PyleUSA.com
10
WIRELESS BT OPERATION
Pair And Connect
Before using the Wireless BT device as a handsfree system for a BT enabled
mobile phone for the rst time, you must pair and connect the two devices
as follows:
1. In any mode, prior to pairing and connecting, the BT logo on the LCD indicating
that no device is connected. The head unit broadcasts the pairing signal
constantly when no devices are connected. Activate the BT on your device
before you begin with the pairing process.
2. When your phone nds the car audio system, the“PYLE" name will be displayed
on your phone screen.
3. Choose the“PYLE" from your mobile phone list to pair and connect with the
car audio system. Upon conrming, the BT logo will stop ashing.
4. When pairing is complete, the mobile phone audio will automatically transfer
to the car audio system whenever a call is made or received, or when the
mobile phone plays music.
Note:
For more deatails of Wireless BT pairing, please refer to the owner's manual for
your mobile phone.
Make A Call
• To make a call, dial the call directly from the paired mobile phone.
Redial Last Dialed Number
Press and hold the button to redial the last dialed phone number.
Press the button to activate SIRI function.
Answer A Call
When the mobile phone is called, the incoming telephone number displays on
the LCD display, press the button to answer the incoming call.
Reject Or End A Call
Press the button to reject, press and hold the to end the call.
Switch Audio Between Cor Audio And Mobile Phone
During a call, press the button to switch the audio source from the car audio
system back to your mobile phone.
Tabla de contenidos
Otros manuales de Amplificador de Pyle
Pyle
Pyle PDA63BT Manual de usuario
Pyle
Pyle PLML51DB Manual de usuario
Pyle
Pyle PFA330BT Manual de usuario
Pyle
Pyle P2001BT Manual de usuario
Pyle
Pyle PVC8U Manual de usuario
Pyle
Pyle PUKTEAK74 Manual de usuario
Pyle
Pyle PAMP1000 Manual de usuario
Pyle
Pyle PD1000BT Manual de usuario
Pyle
Pyle PLMRC400X4 Manual de usuario
Pyle
Pyle PDA5BU.0 Manual de usuario
Pyle
Pyle PCAU46BA Manual de usuario
Pyle
Pyle PLMRMP1A Manual de usuario
Pyle
Pyle PWMA83UFM Manual de usuario
Pyle
Pyle PLMRA400 Manual de usuario
Pyle
Pyle PLMRA120 Manual de usuario
Pyle
Pyle PWMA 100 Manual de usuario
Pyle
Pyle PT510 Manual de usuario
Pyle
Pyle PQA2100 Manual de usuario
Pyle
Pyle PT696BT Manual de usuario
Pyle
Pyle PTA24BT Manual de usuario
