9
OPERATING INSTRUCTIONS
Plug the unit in and turn on the main power switch at the
back of the unit.
Press the Standby button to turn on the unit, this will enter
Low Heat Mode (1300W). Press again to turn off.
Press once to activate High Heat (2000W). Press again to
return to Low Heat (1300W)
Press to increase the desired room temperature
Press to decrease the desired room temperature.
Temperature can be set between 10 - 49°C
-
When the heater has reached the desired set temperature,
the fan mode will continue to blow until the temperature has
dropped to 2°C below the et temperature (the heater will
automatically turn on the low heat setting, if the temperature
drops 4°C below the set temperature the heater will
automatically choose the high heat setting.)
-
Press to activate oscillation. Press again to stop oscillation.
Press until you reach the desired number of hours (up to
8hrs) before you want the heater to turn OFF.
