Puredry PD 2419 Sofia Manual de usuario
l The unit’s circuit board (PCB) has an included safety fuse for overcurrent protection.
You may find the speciifcations of the fuse, marked on the circuit board, for example:
T 3.15A/250V (or 350V), etc.
l To connect or disconnect the device hold with one hand the socket and pull with the
other.
Please be sure that the plug that you put
the device is grounded. Do not use adapter
plug.
For warranty purposes, please
note the SN (serial number). The
SN is labeled at the rear of the
device.
4) Before the initial operation place the
device in vertical possition and let it sit for
2 hours to avoid malfunctions.
5)
)Before the initial operation, please
check, if the water level switch,
located within the water tank area,
is in the right position.
**30/235
12/13
***The dehumidifier Puredry PD2419 Sofia is specially designed to operate with the
new technology refrigerant R-290 , which by the European regulation 517/2014 (EU)
is enviromental friendly.
The fan operation cannot be maually selected to operate the fan only. It operates
automatically during the smart save energy program. When the medium or high fan
speed set the cosuption is 235W in which the compressor operates too. The
deviation rate of consuption varies according to the temprature and the humidity.
Tabla de contenidos
Idiomas:
Otros manuales de Deshumidificador de Puredry
Puredry
Puredry PD 130L Manual de usuario
Puredry
Puredry Mini-D Manual de usuario
Puredry
Puredry PDDW 12100 Famous Manual de usuario
Puredry
Puredry PDD 85200 FAMOUS Manual de usuario
Puredry
Puredry PD 20L Face Lift Manual de usuario
Puredry
Puredry PD 170L Manual de usuario
Puredry
Puredry PDDW 10100 Famous Manual de usuario
Puredry
Puredry PD 625 Manual de usuario
Puredry
Puredry PD 12L Design Manual de usuario
Puredry
Puredry PD 2419 Sophia Manual de usuario
