Perform security measures during the upgrade process:
* VIGIA+Keep the ITSCAM device inactivated during the
upgrade process, ensuring that it is not requested by any services
or other equipment on the network where it is installed;
* VIGIA+Keep the ITSCAM device powered on at all times while
performing the upgrade, taking the necessary steps to prevent it
from restarting or being switched of f.
* Request the firmware file by filling out the form available in the Technical
Support menu Pumatronix website.at
* Access in the Product Manual the step-by-step installation of firmware
updates, which can be done through the web interface or the Pumatronix
software.
37. Use the to view the camera's live image via the View Control Play ler
button. Select the preview image that you want to use as a parameter to set
zoom and press the button.Pause
39. Use to make it easy to fine-tune the plate fram in the Viewer Zoom ing
reference grid.
38. Enable the option which allows use a Show Reference Grid the of
Character Height as basis for the best zoom fit.a
40. Use the function when necessary to reduce Show only center of image
the response time to interface adjustments wh accessing via mobile ile
networks. In this option, the preview scale is reduced to 320x240.
41. Click the adjustment buttons, until the zooming in or out and focusing,
characters become sharp in the preview image.
42. Select the desired zoom and focus position, until the license plate is
readable and in OCR capture conditions (approximately 20 pixels height),
using thereference grid character height of the .
43. 9 42Repeat steps 2 to until you get the plate image with the best
framing and character sharpness.
36. Disable for a better result (if the ITSCAM VIGIA+ model has Auto Iris
this functionality), on the right of the page.
35. Use the function or adjust by accessing the Autofocus Zoom and Focus
Settings Zoom and Focus> menu until the characters become clear in the
preview image, which can be done at any time during the settings process.
09/05
Revis 1.0ion
Pumatronix guarantees the product against any defect in material or
manufacturing process for a period of 1 year from the date of issue of
the invoice, provided that, at the discretion of its authorized
technicians, a defect is found under normal conditions of use.
The replacement of defective parts and the performance of services
resulting from this Warranty will only be carried out at the Authorized
Technical Assistance of Pumatronix or a third party expressly indicated
by it, where the product must be delivered for repair.
This Warranty will only be valid if the product is accompanied by a
Maintenance Form duly completed and without erasures and
accompanied by an Invoice.
1) Use of software/hardware not compatible with the specifications in
the Manual;
2) Connecting the product to the power grid outside the standards
established in the product manual and installations that present
excessive voltage variation;
3) Infiltration of liquids from opening/closing the product;of
4) Damage caused by natural agents (electric discharge, flood, sea
fog, excessive exposure to climate variations, among other factors) or
excessive exposure to heat (beyond the limits established in the
Manual);
5) Use of the product in environments subject to corrosive gases, with
excessive humidity and/or dust;
In compliance with the General Law on Data Protection (LGPD) - Law
No. 13,709, of August 14, 2018, this product has programmable
functions for capturing and processing images that may infringe the
LGPD when used, with other equipment, to capture personal together
data.
Pumatronix is not responsible for the finalities, use and treatment of
the images captured, and the control of the information and forms of
operation of the product are the exclusive decision of the user or
purchaser of the product.
6) Show signs of tampering with safety seals;
7) Show signs of opening and modification made by the customer in
places of the product not authorized by Pumatronix;
8) Damage caused by accidents/falls/vandalism;
9) Display adulterated and/or removed serial number;
10) Damage resulting from transportation and packaging of the
product by the customer in conditions incompatible with it;
11) Bad use and in disagreement with the Instruction Manual.
* For additional information, access the
product manual at www.pumatronix.com.br.
