Pulsar WM60 Manual de usuario
CAL. WM60
DIGITAL QUARTZ
ENGLISH
lTime/calendar
lDual time
l Alarm
lCountdown timer
lStopwatch
lPacer
l Illuminating light (Electroluminescent panel)
NSD38_E.indd 1 08.9.22 10:42:18 AM
2
English
3
English
BUTTONS AND DISPLAYS
TIME/CALENDAR SETTING
Press and hold for 2 seconds to show the TIME/CALENDAR
SETTING mode.
C
s
Press to adjust the ashing digits.
D
s
C
Press to conrm the settings and return to the TIME/CALENDAR
mode.
B
D
C
AM or PM
Alarm mark
Month
Second or
Day of the week
Minute
TIME/CALENDAR MODE
NOTES
uIf the watch is left untouched in the TIME/CALENDAR SETTING mode for about
3 minutes, it will automatically exit the TIME/CALENDAR SETTING mode.
A
Hourly chime signal mark
• The Day of the Week starts flashing.
Press to move on to the next item.
A
s
Setting sequence
Day of the Week Year
Month
Date
Minute Hour
�
�
�
�
�
Hour
Day
NSD38_E.indd 2-3 08.9.22 10:42:19 AM
4
English
5
English
CHANGEOVER BETWEEN 12-/24- HOUR INDICATION DISPLAY
With each press of button D, the time indication format in the
TIME/CALENDAR display can be alternately selected between the
12-hour indication or the 24-hour indication.
D
With each press of button B, the Day of the Week or the Second is
alternately displayed.
B
CHANGEOVER BETWEEN DAY Of THE WEEk AND SECOND DISPLAY
DUAL TIME MODE
Press to enter the DUAL TIME mode.
The dual time mode indicator will appear on the display.
D
C
A
A
Dual time mode
indicator
AM or PM for
dual time
PM for normal time
Dual time
Normal time
NOTES
uIn the DUAL TIME mode, only the Second is displayed, and the Day of the Week
cannot be selected.
NSD38_E.indd 4-5 08.9.22 10:42:20 AM
6
English
7
English
Press and hold for 2 seconds to show the DUAL TIME SETTING
mode.
Press to change the hour to be adjusted.
C
s
D
s
CPress to conrm the dual time setting and return to the TIME/
CALENDAR mode.
• The Hour starts flashing.
DUAL TIME SETTING
NOTES
uIf the watch is left untouched in the DUAL TIME SETTING mode for about 3
minutes, it will automatically exit the DUAL TIME SETTING mode.
CHANGEOVER BETWEEN 12-/24- HOUR INDICATION DISPLAY
With each press of button D, the time indication format in the
DUAL TIME mode can be alternately selected between the 12-hour
indication or the 24-hour indication.
D
ALARM MODE
Press to enter the ALARM mode.
The alarm mode indicator will appear on the display.
B
D
C
A
Alarm mark
A
Alarm mode indicator
PM for normal time
Alarm time
Normal time
Hourly chime signal mark
AM or PM for
alarm time
NSD38_E.indd 6-7 08.9.22 10:42:21 AM
8
English
9
English
ALARM ENGAGEMENT/DISENGAGEMENT
DEach time you press in the ALARM mode, the alarm is alternately
engaged and disengaged.
Press to stop the alarm while sounding.
• While the alarm is engaged, the alarm mark will appear on the display.
HOW TO SET THE HOURLY CHIME SIGNAL
BPress to activate the hourly chime signal in the ALARM mode.
The hourly chime signal mark will appear on the display.
HOW TO STOP THE ALARM WHILE SOUNDING
D
ALARM TIME SETTING
C
Press and hold for 2 seconds to show the ALARM SETTING mode.
s
D
s
A
s
• The Minute starts flashing.
Press to select the minutes to be adjusted.
C
Press to conrm the alarm setting and return to the ALARM mode.
Press to set the minutes to be adjusted.
• The Hour starts flashing.
DPress to change the hour to be adjusted.
s
NOTES
uIf the watch is left untouched in the ALARM mode, it will automatically return to
the TIME/CALENDAR mode in 3 minutes.
NSD38_E.indd 8-9 08.9.22 10:42:22 AM
10
English
11
English
COUNTDOWN TIMER MODE
Press to enter the TIMER mode.
The countdown timer mode indicator will appear on the display.
B
D
C
A
A
Countdown timer mode
indicator
Hour
Elapsed time
Normal time
Past time alert
NOTES
uExcept when the countdown timer is counting, if the watch is left untouched for
about 3 minutes, it will automatically return to the TIME/CALENDAR mode.
TIMER SETTING
Press and hold for 2 seconds to show the TIMER SETTING mode.
• The Minute starts flashing.
Press to select the minutes to be adjusted.
Press to conrm the timer setting and return to the TIMER mode.
Press to set the minutes to be adjusted.
• The Hour starts flashing.
Press to change the hour to be adjusted.
C
s
D
s
A
s
C
D
s
PM for normal time
NSD38_E.indd 10-11 08.9.22 10:42:23 AM
12
English
13
English
STOPWATCH MODE (CHRONO)
Press to enter the STOPWATCH mode.
The stopwatch mode indicator will appear on the display.
Start/Stop/
Restart
B
D
Split/Reset
A
Stopwatch mode indicator
Hour
Minute Second
1/100 Second
Normal time
NOTES
uExcept when the stopwatch is running, if the watch is left untouched for about 3
minutes, it will automatically return to the TIME/CALENDAR mode.
Press to reset the stopwatch to 00’00”00 before use.
B
CView split times
s
TIMER OPERATION
D
s
D
s
B
Press to start counting down.
Press to stop counting down.
Press to reset the display to the starting value.
NOTES
u When the timer finishes counting down, the alarm will sound. Unless you stop
the timer by pressing the button D, the timer starts counting up. The elapsed
time since the timer started counting up will be shown on the display. At the
same time, "UP" appears on the display indicating that the time currently shown
on the display is the elapsed time since the timer started counting up.
NSD38_E.indd 12-13 08.9.22 10:42:24 AM
14
English
15
English
PACER MODE
Press to enter the PACER mode.
The pacer mode indicator will appear on the display.
A
B
D
Pacer mode indicator
Normal time
Pace
NOTES
uExcept when the pacer is working, if the watch is left untouched for about 3
minutes, it will automatically return to the TIME/CALENDAR mode.
uThe PACER mode is excellent to use as a metronome or to keep a good walking/
running pace.
STOPWATCH OPERATION
<Standard measurement >
START STOP RESET
DB
D
<Split time measurement>
START STOP
SPLIT RESET
DBD B B
lUp to 4 split times can be measured.
l Press button B to view the split time displayed under SP 1 to SP4 heading.
To return to ongoing measuring display, press button B again.
SPLIT
C
BTo view the total elapsed time, press button B.
To reset the stopwatch, press button B once again.
After nishing the measurement, press button C to view the
split time(s) taken.
NSD38_E.indd 14-15 08.9.22 10:42:25 AM
16
English
17
English
B
s
Press to change the digits to the right pace for you.
D
s
Press to start the pacer.
DPress again to stop the pacer.
PACER OPERATION
ILLUMINATING LIGHT (ELECTROLUMINESCENT PANEL)
B
BPress to turn the Electroluminescent backlight on for about 3
seconds.
BATTERY CHANGE
Battery life : Approx. 2 years
Battery : CR2025
2
Years
lAs the battery is inserted at the factory to check the function and performance
of the watch, its actual life once in your possession may be less than the
specified period.
lWhen the battery expires, be sure to replace it as soon as possible to prevent
any malfunction.
lWe recommend that you contact an AUTHORIZED PULSAR DEALER for battery
replacement.
NSD38_E.indd 16-17 08.9.22 10:42:26 AM
18
English
19
English
WARNING
lDo not remove the battery from the watch.
lIf it is necessary to take out the battery, keep it out of the reach of
children. If a child swallows it, consult a doctor immediately.
lNever short-circuit, tamper with or heat the battery, and never ex-
pose it to re. The battery may burst, become very hot or catch re.
CAUTION
l The battery is not rechargeable. Never attempt to recharge it, as this
may cause battery leakage or damage to the battery.
TO PRESERVE THE QUALITY Of YOUR WATCH
WATER RESISTANCE
lNon-water resistant
lWater resistance (5 bar)*
If “WATER RESISTANT 5 BAR” is
inscribed on the case back, your
watch is designed and manu-
factured to withstand up to 5 bar
and is suitable for swimming, yachting and taking
a shower.
If “WATER RESISTANT 10 BAR”,
“WATER RESISTANT 15 BAR” or
“WATER RESISTANT 20 BAR” is
inscribed on the case back, your
watch is designed and manufactured
to withstand up to 10 bar/15 bar/20 bar and is suitable
for taking a bath, shallow diving, but not for scuba
diving. We recommend that you wear a PULSAR
Diver’s watch for scuba diving.
l
Water resistance (10 bar/15 bar/20 bar)*
If “WATER RESISTANT” is not
inscribed on the case back, your
watch is not water resistant, and
care should be taken not to get
it wet as water may damage the
movement. If the watch becomes wet, we suggest
that you have it checked by an AUTHORIZED
PULSAR DEALER or SERVICE CENTER.
If “WATER RESISTANT” is inscribed on
the case back, your watch is designed
and manufactured to withstand up to
3 bar, such as accidental contact with
splashes of water or rain, but it is not designed for
swimming or diving.
lWater resistance (3 bar)
3bar WR
5 bar WR
10/15/20
bar WR
NSD38_E.indd 18-19 08.9.22 10:42:28 AM
Tabla de contenidos
Otros manuales de Mirar de Pulsar
Pulsar
Pulsar 7T32 Manual de usuario
Pulsar
Pulsar VD84 Manual de usuario
Pulsar
Pulsar NX01 Manual de usuario
Pulsar
Pulsar VD31 Manual de usuario
Pulsar
Pulsar W170 Manual de usuario
Pulsar
Pulsar VK63 Manual de usuario
Pulsar
Pulsar VK68 Manual de usuario
Pulsar
Pulsar W650 Manual de usuario
Pulsar
Pulsar N944 Manual de usuario
Pulsar
Pulsar Linetic Series Manual de usuario
Pulsar
Pulsar KINETIC 5M62 Manual de usuario
Pulsar
Pulsar CAL. VD53 Manual de usuario
Pulsar
Pulsar YM22 Manual de usuario
Pulsar
Pulsar VJ22 Manual de usuario
Pulsar
Pulsar 5Y67 Manual de usuario
Pulsar
Pulsar VD50 Manual de usuario
Pulsar
Pulsar W855 Manual de usuario
Pulsar
Pulsar N94J Manual de usuario
Pulsar
Pulsar GH Series Hoja de información del producto
Pulsar
Pulsar NX11 Manual de usuario
