Pulsar PSP48005 Manual de usuario

PSP48005

PSP 48V/0,5A PoE desktop power supply

Edition:1 from 03.11.2017

Supersedes edition: ------------

Features of the power supply unit:

•

power output 48VDC/0,5A

•universal input voltage range 90÷264VAC

•high efficiency 89%

•Data and Power carried over one Ethernet Cable

•

LED optical signalization

•protections:

•

overvoltage protection (AC input)

•

SCP short-circuit protection

•

overload (OLP)

•

warranty – 2 year from the production date

1. Technical description.

1.1. General description.

Stabilized DC power supply is intended for supply any LAN devices through Ethernet Cable, which require stabilized voltage

of 48V DC. The unit provide power through 4/5pins(+) and 7/8pins(-) in Ethernet cable that according to the Ethernet standard are

not used to transmit data (data communication is made using pairs: 1/2 and 3/6). The Power supply can’t be used in Gigabit

Ethernet! The unit is protected against short-circuit and overload.

1.2. Technical parameters.

Supply voltage 90 ÷ 264V AC 50/60Hz

Current consumption 0,25A/230VAC max.

Supply power 24W max.

Efficiency 89%

Output voltage 48V DC is supplied over 4/5 (+) and 7/8 (-) pairs of the PoE connector

Output current

Ripple voltage 150mV p-p max.

Short-circuit protection SCP electronic, automatic recovery

Overload protection OLP 110-150% of power supply, automatic recovery

Optical signalization PWR – presence of DC voltage

Operation conditions

temperature -10

C÷40

relative humidity 20%...90%, without condensation

Dimensions (LxWxH) 119x 61 x 38 [mm]

Net/gross weight 0,33kg / 0,38kg

Protection class EN 60950-1:2007 II (second)

Length of detachable AC cable 1m

Storage temperature -20ºC...+60ºC

Fig.1. Dimension of power supply.

2. Installation.

2.1. Requirements.

The power supply shall be mounted by the qualified installer having appropriate (required and necessary for a given country)

permissions and qualifications for connecting (operating) low-voltage installations. The power supply shall be mounted in closed rooms,

according to the environment class II, of the normal air humidity (RH=90% max. without condensation) and the temperature within the

range from -10°C to +40°C.

The power supply shall be mounted in a close casing (a cubicle, a terminal device) and in order to fulfill LVD and EMC

requirements the rules for power supplies, encasing and shielding shall be observed according to application.

The power supply unit is intended to use in Ethernet 10Mbit/s and 100Mbit/s (Fast Ethernet) networks. It can’t be used in

Gigabit Ethernet! Connections between power supply and LAN Devices should be made using Ethernet cable Cat.3.

The power supply unit is designed for a continuous operation and is not equipped with a power-switch. Therefore, an

appropriate overload protection in the power supply circuit should be provided. Moreover, the user shall be informed about the method

of disconnecting the mains voltage (usually through assigning an appropriate fuse in the fuse-box. The electrical system shall follow

valid standards and regulations.

2.2. Installation procedure.

1. Connect the Ethernet cables to the RJ45 ports: LAN, PoE. Attach a LAN data cable patch cord from Ethernet Switch port to the

RJ45 connector on PoE unit marked LAN. Then attach a second patch cable from the “PoE” RJ45 connector on the PoE unit to the

device to be powered.

2. Connect the power supply unit to a grounded AC power source using provided three wires power cord. The power supply has to by

installed in such way to keep the air flow around the supply unit.

3. After tests and operation control are performed, the casing (cubicle) shall be closed etc.

3. Maintenance.

Any and all maintenance operations may be performed following the disconnection of the power supply from the power

network. The power supply does not require any specific maintenance procedures.

WEEE MARKING

According to the EU WEE Directive – It is required not to dispose of electric or electronic w ste s

unsorted municip l w ste nd to collect such WEEE sep r tely.

Puls r

Siedlec 150, 32-744 Łapczyca, Poland

Tel. (+48) 14-610-1 -40, Fax. (+48) 14-610-1 -50

e-mail: biuro@pulsar.pl, sale[email protected]

http:// www.pulsar.pl, www.zasilacze.pl

Tabla de contenidos

Otros manuales de Fuente de alimentación de Pulsar

Pulsar

Pulsar PSDCR08128 Manual de usuario

Pulsar

Pulsar PSDCB18129B Manual de usuario

Pulsar

Pulsar BLACK POWER PSBEN 5012E/LCD Manual de usuario

Pulsar

Pulsar PSCV5012 Manual de usuario

Pulsar

Pulsar EN54-7A40 Manual de usuario

Pulsar

Pulsar PSBS 3012C Manual de usuario

Pulsar

Pulsar PSC07510 Manual de usuario

Pulsar

Pulsar PSBEN 3012C Manual de usuario

Pulsar

Pulsar PSB-12V3A Manual de usuario

Pulsar

Pulsar PS1502450 Manual de usuario

Pulsar

Pulsar HPSBOC 7012C Manual de usuario

Pulsar

Pulsar PSBS 5012D Manual de usuario

Pulsar

Pulsar PSU-U-24V/AC-4A/4/FTA/PTC-TR-MC Manual de usuario

Pulsar

Pulsar PSD480250 Manual de usuario

Pulsar

Pulsar PSD15040 Manual de usuario

Pulsar

Pulsar PSDC161212T Manual de usuario

Pulsar

Pulsar AWZ 333 Manual de usuario

Pulsar

Pulsar BNC08128 Manual de usuario

Pulsar

Pulsar PSP54006 Manual de usuario

Pulsar

Pulsar PSBEN 10A12E/LCD Manual de usuario

Pulsar

Pulsar PSBEN 2024C Manual de usuario

Pulsar

Pulsar AWZ 224 Manual de usuario

Pulsar

Pulsar RUPS812T Manual de usuario

Pulsar

Pulsar PSBS 10A12E Manual de usuario

Manuales populares de Fuente de alimentación de otras marcas

Monacor

Monacor PS-12CCD Manual de usuario

VOLTIMA

VOLTIMA MagicBox 15 Manual de usuario

Agilent Technologies

Agilent Technologies 6032A Manual de usuario

Miller

Miller Auto Deltaweld 452 Manual de usuario

BCP

BCP PUOUBK Hoja de instrucciones

HC 2210 Manual de usuario

Puls

Puls CT5.241 Manual de usuario

OCZ

OCZ ZX1250W Manual de usuario

iseg

iseg ECH 238 Manual de usuario

Power

Power XXL A Series Manual de usuario

Agilent Technologies

Agilent Technologies 6631B Manual de usuario

Renogy

Renogy PHOENIX 300 Manual de usuario

HP 6200B Manual de servicio

Epson

Epson Stylus Scan 2500 Manual de funcionamiento

Puls

Puls MiniLine ML50.100 Manual de usuario

Puls

Puls AS-Interface SLA4.100 Manual de usuario

Kenwood

Kenwood PS-60 Manual de usuario

Elmdene

Elmdene G1380xN-y-s Series Manual de usuario