PTZOptics Move 4K Manual de usuario
2
v1_1 rev. 10-22
Preface .......................................................... 3
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Warning .......................................................... 3
Warranty ......................................................... 4
Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
FCC Statement .............................................. 4
Copyright Notice ............................................. 4
NDI®|HX with NDI® 3 Connection ..................................... 5
Features ......................................................... 7
Technical Specications ............................................. 8
Dimensions ....................................................... 11
IR Remote Controller Guide .......................................... 12
Serial Communication Control......................................... 14
On Screen Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Network Connection ................................................ 29
Web UI........................................................... 32
Maintenance and Troubleshooting ..................................... 47
Unqualied Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Troubleshooting .............................................. 4
3v1_1 rev. 10-22
Preface
Congratulations on receiving your new PTZOptics Move 4K Camera. This manual introduces the
function, installation, and operation of the HD camera. Prior to installation and usage, please read the
manual thoroughly. If you have any questions or issues with this process, please contact our Support
Team.
Precautions
This product can only be used in the specied conditions in order to avoid any damage to the unit
itself.
• Don’t subject the camera to rain or moisture.
• Don’t remove the cover. Removal of the cover may result in an electric shock. In addition to
• Never operate outside of the specied operating temperature range, humidity, or with any other
power supply than the one originally provided with the unit.
• Please use a soft dry cloth to clean the unit. If the unit is very dirty, clean it with diluted neutral
detergent; do not use any type of solvents which may damage the surface.
Warning
• Electrical Safety
Installation must be in accordance with national and local electric safety standards. Do
not use any power supply other than the one originally supplied with this camera.
• Polarity of Power Supply
The power supply output for this product is 12V DC with a maximum current supply of
2A. Polarity of the power supply plug is critical and is as follows:
• Handling
ŜAvoid any stress, vibration, or moisture during transportation, storage, installation,
and operation.
ŜDo not lift or move the camera by grasping the camera head. Do not turn the camera
head by hand. Doing so may result in mechanical damage.
ŜDo not expose the camera to any corrosive solid, liquid, or gas to avoid damage to
the cover which is made of a plastic material.
ŜEnsure that there are no obstacles in the pan or tilt ranges of the camera lens.
ŜNever power down the camera on before installation is complete.
• Do not dismantle the camera – PTZOptics is not responsible for any unauthorized
modication or dismantling.
4
v1_1 rev. 10-22
Supplied Accessories
When you unpack your camera, check that all the supplied
accessories are included:
▪Camera 1
▪AC Power Supply 1
▪USB A-A Cable 1
▪RS232 Cable 1
▪IR Remote 1
▪AAA Batteries 2
▪Quick Start Guide 1
FCC Statement
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
FCC Caution: Any changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment. Operation is subject to the
following two conditions: This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
• Warning - This is a class A product. In a domestic environment, this product may cause
radio interference in which case the user may be required to take adequate measures.
• Remote Control Battery Safety Information - Store batteries in a cool and dry place.
Do not throw away used batteries in the trash. Properly dispose of used batteries through
specially approved disposal methods. Remove the batteries if they are not in use for long
periods of time. Battery leakage and corrosion can damage the remote control. Do not use
old batteries with new batteries. Do not mix and use dierent types of batteries: alkaline,
standard (carbon-zinc) or rechargeable (nickel-cadmium). Do not dispose of batteries in a
re. Do not attempt to short-circuit the battery terminals.
Copyright Notice
The entire contents of this manual / guide, whose copyright belongs to PTZOptics, may not be cloned, copied, or translated in any way
without the explicit permission of the company. The product specications referred to in this document are for reference only and as
such are subject to updating at any time without prior notice.
©2022 | PTZOptics | All Rights Reserved
Warranty
PTZOptics includes a limited parts & labor warranty for all PTZOptics manufactured
cameras. The warranty is valid only if PTZOptics receives proper notice of such defects during the
warranty period. PTZOptics, at its option, will repair or replace products that prove to be
defective. PTZOptics manufacturers its hardware products from parts and components that are new
or equivalent to new in accordance with industry standard practices.
5v1_1 rev. 10-22
NDI®|HX Connection
The NDI®|HX connection allows you to connect and control your camera through any NDI
compatible hardware or software on your Local Area Network. Once your camera is setup on a LAN,
you can utilize the NDI®|HX connection.
NDI®|HX Setup:
1. Download and install the latest NDI®|HX Tools from https://www.ndi.tv/tools.
2. Congure your camera settings from the NDI Cong tab in the camera’s web
interface.
3. Select your camera within the NDI®|HX compatible device.
4. Select your camera. The NDI feed will utilize the camera’s device friendly name.
NewTek® NDI®, NDI® 4 & NDI®|HX are all registered trademarks by NewTek®.
Please note that your NDI License key is non-transferrable.
6
v1_1 rev. 10-22
Item Number
1 Line In
2 Line Out
3 Resolution Dial
4 RS485 Interface
5 RS232 IN Interface
6 RS232 OUT Interface
7 DC 12V
8 LAN (PoE)
9 USB 2.0
10 3G-SDI
11 HDMI
12 Restore
Connection Guide
Please check connections are correct before starting.
Connect the power adapter to the power connector on the rear panel of the camera. The power
indicator on the front panel of the camera will be on.
After the camera is powered on, it starts to initialize. It will rotate to the left and right limit positions,
and then both horizontal and vertical limit positions. It will then stop at the center position. When the
motor stops running, and the initialization is complete.
(Note: If preset 0 is saved, PTZ will be move to preset 0)
123456
78910 11 12
7v1_1 rev. 10-22
Features
• Built-In Auto-Tracking
Advanced AI algorthms to enable auto tracking in various scenarios such as education,
conerences and live broadcasts.
• 4K 60 fps
UltraHD 4K (3840x2160p) video resolutions up to 60 FPS.
• Tally Light
Features a built-in tally light he light shines GREEN to indicate when the camera is in preview
mode. The light shines RED when the camera is on-air. The tally light illuminates when it’s being
used with NDI-compatible video mixing software.
• HDMI 2.0
Supports HDMI 2.0, can directly output 4K uncompressed digital video.
• Photobooth Functionality
Save short videos and photos directly to the camera.
• Low Light
CMOS image sensor with ultra-high SNR can reduce image noise in low light.
• 3D Noise reduction
Produces a clean, clear image even in low light and the signal-to-noise ratio is as high as 55dB.
• Built-in Gravity Sensor
Supports automatic image ip function, convenient installation and use of engineering.
• Audio Embedding
Line-level audio can be embedded over every video output.
• Multiple Interfaces
Supports HDMI 2.0 or 3G-SDI, LAN, & USB 2.0.
(HDMI & SDI are not simultaneous.)
• Remote Control
Can be controlled through the IR remote, network connection, as well as the RS232, RS485,
and the USB port.
8
v1_1 rev. 10-22
Model PT20X-4K-WH-G3 / PT20X-4K-GY-G3
Type PTZOptics Move 4K
Description 4K60 PTZ camera with auto tracking & HDMI, SDI, USB, & IP video
outputs
Resolution & Frame Rate HDMI: 2160p-60/59.94/50/30/29.97/25, 1080p-60/59.94/50/30/29.97/25, 1080i-
60/59.94/50, 720p-60/59.94
SDI: 1920x1080p-60/59.94/50/30/29.97/25, 1920x1080i-60/59.94/50,
1280x720p-60/59.94
Sensor 1/1.8 inch, CMOS, Eective pixels: 8.42M
Scanning Mode Progressive
Lens f = 6.25mm ~ 125mm, F1.58 ~ F3.95
Digital Zoom O (3840x2160), 2X (1920x1080), 3X (1280x720), 4X, (960x540), 8X
(480x270), 16X (256x144)
Video Based Auto Tracking Supported
Audio Based Auto Tracking Not Supported
Minimum Illumination 0.5 Lux @ (F1.8, AGC ON)
Shutter 1/30s ~ 1/10000s
White Balance Auto, Indoor, Outdoor, One Push, Manual, VAR
Backlight Compensation Supports
Digital Noise Reduction 3D Digital Noise Reduction
Video Signal Noise Reduction ≥55dB
Horizontal Angle of View 3.5° ~ 60.7°
Vertical Field of View 1.89° ~ 34.1°
Horizontal Rotation Range ±170°
Vertical Rotation Range -30° ~ +90°
Pan Speed Range 1.7° ~ 100°/s
Tilt Speed Range 1.7° ~ 69.9°/s
Image Flip Supported (built-in gravity sensor)
Image Mirror Supported
Image Freeze Supported
PoE Supported
Preset Accuracy 0.1⁰
Technical Specications
9v1_1 rev. 10-22
USB Features
Operating System Windows 7 / 8.1 / 10 / 11 / Mac OS, Linux, Android
Color System/Compression YUY2 / MJPEG / H.264 / H.265
Video Format YUY2: Max resolution: 3840x2160@5
H264: Max resolution: 3840x2160@30
H265: Max resolution: 3840x2160p@30
MJPEG: Max resolution: 3840x2160p@30
USB Audio Supported
UVC Version UVC 1.1 ~ 1.5
UVC Control Supported
IP Video Features
Video Compression H.264, H.265, MJPEG
Video Stream First Stream, Second Stream
First Stream Resolutions 3840x2160, 1920x1080, 1280x720, 1024x576, 720x480, 720x408,
640x480, 640x360
Second Stream Resolutions 720x480, 720x408, 640x480, 640x360, 480x320, 320x240
Video Bitrate First Stream: 32kbps ~ 102400kbps
Second Stream: 32kbps ~ 20480
Bit Rate Type Constant Bit Rate (CBR), Variable Bit Rate (VBR)
Frame Rate 50Hz: 1 ~ 50 fps
60Hz: 1 ~ 60 fps
Audio Compression AAC
Audio Bit Rate 96kbps, 128kbps
Supported Protocols TCP/IP, UDP, HTTP, RTSP, RTMP/RTMPS, ONVIF, NDI®|HX, SRT,
Multicast, etc.
Input / Output Interface
HD Output 1x RJ45: 10/100/1000M Adaptive Ethernet Port
1x HDMI: version 2.0
1x USB 2.0: type A
1x 3G-SDI: BNC type, 800mVP-p, 75Ω, Along to SMPTE 424M
standard
Audio Interface 1x 3.5mm Line level Input
1x 3.5mm Line level Output
Communication Interface 1x 8-pin Mini DIN RS232 Input, Max distance: 98.5ft / 30m, Protocol: VISCA
/ Pelco-D / Pelco-P
1x 8-pin Mini DIN RS232 Output, Max distance: 98.5ft / 30m,
Protocol: VISCA / Pelco-D / Pelco-P
1x 2-pin Phoenix port RS485 Input / Output, Max distance: 3,937ft / 1200m,
Protocol: VISCA / Pelco-D / Pelco-P
IR 4x IR Addresses, Max distance 30ft / 9m
Power Jack JEITA type (DC IN 12V)
10
v1_1 rev. 10-22
Physical Parameter
Input Voltage DC 12V / PoE(802.3af)
Current Consumption Max 2A
Operating Temperature 14°F ~ 104°F (-10°C ~ 40°C)
Storage Temperature -40°F ~ 140°F (-40°C ~ 60°C)
Humidity Range 10% - 80%
Power Consumption Max 18W
Size in. (W x D x H) 5.57” W x 5.94” (6.65” including SDI) D x 6.93” (7.91” with tilt up) H
Size mm. (W x D x H) 141.48mm W X169mm (including SDI) D x 176mm (201mm with
tilt up) H
Camera Weight 3.25 lbs | 1.47kg
Otros manuales para Move 4K
2
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Cámara digital de PTZOptics
PTZOptics
PTZOptics PT30X-4K-WH-G3 Manual de usuario
PTZOptics
PTZOptics VL-ZCAM Manual de usuario
PTZOptics
PTZOptics VL NDI HX ZCAM Manual de usuario
PTZOptics
PTZOptics Studio Pro Manual de usuario
PTZOptics
PTZOptics PTEPTZ-ZCAM-G2 Manual de usuario
PTZOptics
PTZOptics PT20X-NDI-GY Manual de usuario
PTZOptics
PTZOptics NDI HX PT20X-NDI-ZCAM Manual de usuario
PTZOptics
PTZOptics 20X-ZCAM Manual de usuario
PTZOptics
PTZOptics 12X NDI|HX ZCAM Manual de usuario
PTZOptics
PTZOptics PT20X-NDI-ZCAM Manual de usuario
