8
65
7
SUPPORT AND WARRANTY
PRYME Radio Products warrants this product against defects in materials or workmanship for a
period of one year from the date of retail purchase. PRYME will repair or replace a defective unit, at
our option, without charge for parts or labor. The limited warranty is extended only to the original
purchaser and is valid only to consumers in the United States and Canada. It does not cover
damage or failure caused by or attributable to Acts of God, abuse, misuse, improper or abnormal
usage, faulty installation, improper maintenance, lightning, or other incidences of excessive
voltage, or any tampering or repairs by other than a PRYME authorized repair facility. It does not
cover replacement of consumable parts, transportation costs, or damage in transit.
Repair or replacement under the terms of this warranty does not extend the terms of this warranty.
This warranty can only be modified by an officer of PRYME Radio Products, and then only in writing.
Should this product prove defective in workmanship or material, the consumer’s sole remedies
shall be such repair or replacement as provided by the terms of this warranty. Under no
circumstances shall PRYME Radio Products be liable for any loss or damage, direct, consequential,
or incidental, arising out of the use of or inability to use this product. Some states do not allow
limitations on how long an implied warranty lasts or the exclusions or limitations of incidental or
consequential damages, so the above limitations or exclusions may not apply to you. This warranty
gives you specific legal rights. You may also have other rights, which may vary, from state to state.
For support or warranty service on your PRYME product, contact us at 1-800-666-2654 or visit us on
the web at www.PRYME.com.
COPYRIGHT AND TRADEMARK INFO
© 2017 PRYME Radio Products, Brea CA. All rights reserved.
PRYME® and PRYMEBLU® are trademarks owned by PRYME Radio Products, Brea CA.
DISCLAIMER: The Bluetooth wireless link used by PRYMEBLU products is an open standard,
unsecured technology. As such, it is not recommended for first-responder or other mission
critical users.
COMPATIBLE AUDIO ACCESSORIES
The WTX-PTT1500D is compatible with a wide variety of different PRYME
wired audio accessories (sold separately), including:
COMPATIBLE WIRELESS (BLUETOOTH LOW ENERGY) PTT BUTTONS
The wireless PTT function of the WTX-PTT1500D requires one of the following
PRYMEBLU BTLE (Bluetooth Low Energy) PTT buttons (sold separately):
PAIRING A BLUETOOTH PTT BUTTON (OPTIONAL)
The wireless PTT function of the WTX-PTT1500D requires a compatible PRYMEBLU BTLE (Bluetooth
Low Energy) PTT button (sold separately). For a list of compatible PTT buttons, see PAGE 7. Prior to
use, the BTLE PTT button must be paired to the WTX-1500D. This pairing process needs to be done
only once as long as the same PTT button and WTX-1500D are used together. Once paired, the
devices will remember each other and will reconnect to each other whenever they are both
powered on and within range.
To pair the devices do the following:
1. Power off the two-way radio that the WTX-PTT1500D is attached to.
2. Press and hold the Main (front-facing) PTT button on the WTX-PTT1500D.
3. Power on the two-way radio. Continue to hold the Main PTT button.
4. After 5 seconds, release the Main PTT button. (Note that on some radios, such as Motorola
TRBO models, you will need to wait 5 seconds after the radio sounds it’s “power on”tone.)
5. The LED on the WTX-PTT1500D will now flash two times every second. This indicates that the
WTX-1500D is in pairing mode and can be connected to a compatible Push-to-Talk.
6. Make sure that the wireless PTT button is powered on. Press and release the wireless PTT
button 2-3 times.
The wireless PTT button and WTX-PTT1500D should now be paired to each other and ready for use.
Note: The Bluetooth feature of the WTX-PTT-1500D is powered by the attached two-way radio.
The WTX-PTT1500D does not use a battery and does not require recharging.
STATUS LED MESSAGES
The LED indicator on the WTX-PTT1500D shows various different messages depending
on the status of the device. Refer to the following table for more information:
NORMAL OPERATION
When operating using the WTX-PTT1500D, the following applies:
• Received signals will be heard through the speaker or earphone of the audio accessory that is
connected to the WTX-PTT1500D. The volume level is controlled by the attached two-way radio’s volume
knob.
• To cause the attached 2-way radio to transmit you can press and hold any of the following PTT buttons:
1. The Main PTT button on the WTX-PTT1500D
2. The Aux PTT button on the WTX-PTT1500D
3. The PTT button on the optional PRYMEBLU Wireless PTT button, if one is paired to the WTX-PTT1500D
• When transmitting, audio is taken from the microphone of the audio accessory that is connected to the
WTX-PTT1500D.
LED INDICATION
No flash
one flash / second
two flashes per second
MEANING
Radio powered off
Normal operation
WTX-PTT1500D is in pairing mode
SPM-1200TR
Surveillance Kit SPM-1400TR
Lightweight Headset
MR-1500
Throat Microphone
MR-1700 In-Helmet Skull Mic
with Bone Conduction
SPM-4200TR StormTrooper
Speaker Microphone
SPM-2200TR Trooper II
Speaker Microphone
HBB-EM Dual Earmuff Headset
Aviation Style (requires MC-EM-TAC cable)
HDS-EM Dual Earmuff Headset
Racing Style (requires MC-EM-TAC cable)
MR-2100 Trooper Speaker Microphone
(requires the MC-2100TR cable)
NBP-BH
Bone Conduction Headset
BT-PTT-Z BT-PTT-ZU-FOB BT-PTT-ZU-RING BT-PTT-ZU-STRAP
