P-VFT-3S Offline Programming Software
P-VFT-3S Tools is an offline programming and test utility that can
greatly reduce installation programming time, and increase
confidence in the site-specific software. It is Windows® based
and provides technologically advanced capabilities to aid the
installer. The installer may create the entire program for the
PTW-3300S in the comfort of the office, test it, store a backup file,
then bring it to the site and download from a laptop into the panel.
And realize offline programming by USB/SD card, to achieve
system setting, linkage data, loop data modification and system
upgrade.
CONFIGURATION GUIDELINES
Stand-alone and network systems require a main display. On
single FACP systems (one PTW-3300S), the display option is the
PW-CPU-3S. On network systems (two or more networked fire
panel nodes), at least one NCA, or Proworkse-3S workstation
annunciation device is required. Options listed as follows.
MAIN SYSTEM COMPONENTS
PW-CPU-3S: PTW-3300S Primary Display. PW-CPU-3S ships
with keypad/display installed; includes 1024x600 pixel touch
screen backlit LCD display, Virtual full QWERTY programming and
control keypad. PW-CPU-3S is a central processing unit and
requires an MPS-350W-3S power supply.
LCM-3S: Loop Control Module. Provides two SLC. PTW-3300S
supports up to eight LCM-3Ss. one LCM-3S module supports two
loops, need to be used with the interface board LCM-EX.
LCM-EX: Loop Control Module Interface Board. 1 piece interface
board can be connected to 4 pieces loop control modules, more
than 4 pieces loop cards are required to use 2 pieces interface
boards. Up to 2 pieces interface boards.
POM-32S：Up to 32 nodes per Multi-Line Linkage Control
Module, includes plate and membrane, need to be used with
POM-3S. 1pc POM-32S can connect 4pcs POM-3S output cards.
3 types of status indicators(Output, Feedback,Fault).
POM-3S：Multi-Line Linkage Output Card; 4 channels, each
channel contains 1 output and 1 channel of monitoring, with line
monitoring function, need to be used with POM-32S. Up to 8
pieces POM-3S.
CONFIGURE SYSTEM: For Four-loop PTW-3300S with display:
PW-CPU-3S, two LCM-32Ss, LCM-EX, (POM-32S,
POM-3S,DP-1B-3S, options), MPS-350W-3S, SBB-B-3S.
NETWORKING OPTIONS
PW-NCA-3S: Network Control Annunciator. An alternate primary
display for PW-CPU-3S can be provided by the PW-NCA-3S,
Proworkse-3S. On network systems (two or more networked fire
panel nodes), one network display (either PW-NCA-3S,
Proworkse-3S) is required for every system. need to order
backbox (3S-NCA-SBB) separately.
Proworkse-3S: Graphics PC workstation, Proworkse-3S GUI
software, and USB Dongle.
PW-GW-L/LRM (PW-GW-L/LRM2/PLUS): LoRa Gateway.
AUXILIARY POWER SUPPLIES AND BATTERIES
MPS-350W-3S: One power supply and two 12V24AH
batteries are required for each PTW-3300S.
COMPATIBLE DEVICES, EIA-485 PORTS
LCD-8800: Floor Liquid Crystal Display annunciator.
LDM-64-3S：Lamp Driver Annunciator Control Module. For
use with custom graphic annunciators. 64 Points.
LDM-E64-3S：Lamp Driver Annunciator Expander module.
For use with custom graphic annunciators. 64 Points.
LPI-MODBUS-3S：Modbus Network Card. Used to integrate
third-party system information or output linkage signals to
third parties(Includes LPI-MODBUS-3S hardware and plug-in
software).option.
GW-MODBUS-3S：Modbus Network Card. For third-party
systems, information integration interface for FAS systems,
(Includes GW-MODBUS-3S hardware and plug-in software),
option.
COMPATIBLE INTELLIGENT DEVICES
PW-300P: Low-profile photoelectric detector.
PW-300PT: Low-profile photoelectric detector with 135°F
(57°C) thermal.
PW-300T: thermal detector 135°F (57°C).
PW-300TR: thermal detector 135°F (57°C) with rate-of-rise.
PW-300APT: Acclimate Plus™ low-profile multisensor
detector.
PW-330DP：Low-profile CLIP photoelectric detector.
PW-330DT：Low-profile CLIP Thermal Detector, Fixed
Temperature.
JTW-BCD-PW-330DT：Low-profile CLIP Thermal Detector,
Fixed Temperature and Rate of Rise Combination.
PW-600P: Intelligent Photoelectric Smoke Detector.
PW-600T: Intelligent Thermal Detector.
JTY-GD-PW-600PM: Intelligent Photoelectric Smoke
Detector.
JTW-BD-PW-600TM: Intelligent Thermal Detector.
B224RB: Low-profile relay base.
B224BI: Isolator base for low-profile detectors.
B501: 4" (10.16 cm) base.
P301BH: Sounder Base for 300P Series
B500BH-3: Loop-powered Sounder Base
B200S: Intelligent programmable sounder base, capable of
producing a variety of tone patterns including ANSI Temporal
3. Compatible with synchronization protocol.
B200SR: Sounder base, Temporal 3 or Continuous tone.
B900BI：Isolator Base for 330DP Series.
B900BH：Intelligent sounder base for 330DP/600PM/600TM
Series.
www.protectwell.com
Page 3 of 4
PTW-3300S
Intelligent Touch Screen Addressable Fire Alarm System
SE-190731-Z
