Protech ZOOM 450 ccpm Manual de usuario

Vortex-flowmeter

VERSAFLOW VORTEX Quick Start

VERSAFLOW VORTEX

34-VF-25-56 iss.1 GLO Sept 07 US2

General safety notes

You can find the newest and/or additional information on the CD-ROM

provided, in the handbook, the datasheet, special manuals, certificates

and the download center at www.honeywell.com/ps.

Installation, mounting, commissioning, and maintenance can be

performed only by trained personnel.

Responsibility for suitability and intended use of this instrument rests

solely with the user.

The supplier accepts no liability for inappropriate use by the customer.

Improper installation and operation may lead to loss of warranty.

Moreover, the "general terms and conditions" on the back of the bill

apply, which form the basis for the sales contract.

If you have to send the device back to the manufacturer or supplier, fill

out the form contained on the CD-ROM and enclose it with the device.

Unless this form is completely filled out, it will unfortunately not be

possible for the manufacturer to perform repair or inspection.

Respect general and local electrical safety requirements.

VERSAFLOW VORTEX

www.honeywell.com/ps 3

Visual check

•Check the consignment for damage.

•Check the information on the nameplate against your order specifications.

Scope of delivery

1 Flowmeter in the version ordered

2 Quick Start directions

3 Certificates, calibration report and parameter datasheet

4 CD with complete documentation

5 Bar magnet

VERSAFLOW VORTEX

34-VF-25-56 iss.1 GLO Sept 07 US4

Transportation

Permitted temperature ranges

1 Max. medium temperature see tech. datasheet

2 Max. storage temperature and ambient temperature

Ambient temp.: Ex devices -20...+65°C, non Ex devices -40...+85°C

Storage temperature: -50...+85°C

3 Protect device from direct exposure to sunlight

VERSAFLOW VORTEX

www.honeywell.com/ps 5

Preferred installation locations for the signal converter

Thermal insulation

1 Above a horizontal pipe

2 Below a horizontal pipe

3 On a vertical pipe

1 Max. height of insulation up to intermediate piece between measuring sensor and signal con-

verter

2 Max. thickness of the insulation up to the bend of the pressure pipe

3 Insulation

VERSAFLOW VORTEX

34-VF-25-56 iss.1 GLO Sept 07 US6

Minimum inlet runs

1 General inlet run without disturbing flow ≥20 DN

2 Behind a control valve ≥50 DN

3 After a pipe diameter reduction ≥20 DN

VERSAFLOW VORTEX

www.honeywell.com/ps 7

1 After a single bend 90°≥20 DN

2 After a double bend 2x90°≥30 DN

3 After a double three-dimensional 2x90°bend ≥40 DN

VERSAFLOW VORTEX

34-VF-25-56 iss.1 GLO Sept 07 US8

Minimum outlet runs

INFORMATION!

If a flow straightener 2is installed, the required inlet run is

shortened.

1 Straight inlet run upstream of straightener ≥2 DN

2 Flow straightener

3 Straight pipe run between flow straightener and flowmeter ≥8 DN

4 Minimum straight outlet run ≥5 DN

1 Upstream of pipe expanders, pipe bends, control valves, etc. ≥5 DN

2 Upstream of metering points ≥5 …6 DN

VERSAFLOW VORTEX

www.honeywell.com/ps 9

Piping with control valves

Vapor and gas measurement

1 Recommended: Installing the flowmeter upstream of the control valve, distance ≥5 DN

2 Not recommended: Installing the flowmeter directly downstream of control valves, due to vor-

tex formation.

CAUTION!

Prohibited: Installing the flowmeter in a lower pipe bend 1, risk of

condensate formation 2!

1 Lower pipe bends

2 Condensate

VERSAFLOW VORTEX

34-VF-25-56 iss.1 GLO Sept 07 US10

Liquid measurement, prohibited installation locations

CAUTION!

Prohibited: Installing the flowmeter in an upper pipe bend 1, risk

of gas bubbles 2forming!

CAUTION!

Prohibited: Installing the device in a downstream pipe 3or

upstream pipe of a run-out 4.

There is the risk of a partially-filled pipe!

Otros manuales para ZOOM 450 ccpm

Tabla de contenidos

Otros manuales de Juguete de protech

protech

protech IBIS 46 Manual de usuario

protech

protech STAUDACHER Manual de usuario

protech

protech YADA ST Manual de usuario

protech

protech FANTIC Manual de usuario

protech

protech nitro fun 12 Manual de usuario

protech

protech Cessna 400 Manual de usuario

protech

protech Sky Bike T0344 Guía de configuración

protech

protech SKYRAIDER T0442 Manual de usuario

protech

protech FOCUS180 Manual de instrucciones

protech

protech Stylus-E Manual de usuario

protech

protech Douglas DC3 Manual de instrucciones

protech

protech Skydancer Manual de usuario

protech

protech Slopemaster 3D Manual de usuario

protech

protech TL-1 Manual de usuario

protech

protech ZOOM PRO 400 Manual de usuario

protech

protech Carat Manual de usuario

protech

protech ALPHA180 Manual de instrucciones

protech

protech ZOOM 425 ccpm Manual de usuario

protech

protech TOJEIRO 90 Manual de usuario

protech

protech Katana S 200 Manual de usuario

protech

protech VXR-8 Manual de usuario

protech

protech LASER ARROW Manual de usuario

protech

protech Cessna 400 Manual de instrucciones

protech

protech CHRISTEN EAGLE Manual de usuario

Manuales populares de Juguete de otras marcas

marklin

marklin 37321 Manual de usuario

Canon

Canon PAPER CRAFT Manual de usuario

GREAT PLANES

GREAT PLANES Pitts M-12S Manual de usuario

NOCH

NOCH 14261 Manual de usuario

Hausler

Hausler 450 SE V2 Manual de usuario

Dynaflite

Dynaflite Daydream Manual de usuario

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Manual

Kenner

Kenner Batman 63651 Manual de usuario

LEGO

LEGO 8527 Manual de usuario

iKarus

iKarus ECO 8 Manual de usuario

Multiplex

Multiplex EasyStar II Manual de instrucciones

Walkera

Walkera 38 Manual de instrucciones

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Manual de usuario

MD MXION SWD Manual de usuario

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Manual de usuario

marklin

marklin 39671 Manual de usuario

Meccano

Meccano 15103 Manual de usuario

LEGO

LEGO TECHNIC 8735 Manual de usuario

protech ZOOM 450 ccpm Manual de usuario

Manuales populares de Juguete de otras marcas