Protech Systems MP-4815 Manual de usuario

Ver. Q1

Packing Checklist

Specifications System View

MP-4815 MP-4815

MP-4815

REAR I/O

Front View

Quarter View

477.55

227.14

365.23

2nd Display

PA-6225

Side View

VGA

USB 2.0

Type-B

DC IN

2nd Display

Display 15-inch LCD panel

Resolution LVDS 1024x768 dots XGA (24-bit)

Brightness Typ. 300 cd/ m2

Backlight Lamp Life time: min. 50,000 hours

Touch Panel P-CAP touch (Bezel free) or Resistive Touch

Touch Control Board Only for 15-inch Resistive Touch Panel (USB Interface)

Speaker 3W+3W@4 ohm speaker

Power Supply DC12V/3.33A/ 40W Power Adapter, 90 ~240 Vac, 50/60Hz

Wall Mount VESA Mount 100x100 mm

Dimension (WxHxD) 367 x 300 x 38 mm

Weight MP-4815: 3.1 kg

MP-4815 2nd Display + PA-6225: 12.6 kg

Certificate CE

Rear I/O Ports

DC IN 1 x DC-IN port

USB 1 x USB 2.0 port, Type B (downstream)

VGA 1 x VGA port

Optional Integrated Moudule

Module Mounting Provides mounting holes on right side to fix other devices

Optional Integrated Devices

Camera Camera module (USB Interface)

Environment

Operating Temp. 0°C ~ 40°C (32°F ~ 104°F)

Storage Temp. -20°C ~ 60°C (-4°F ~ 140°F)

Humidity 10% ~ 90%

If you discover any item below are damaged or

lost, please contact your vendor immediately.

MP-4815 x1

This Quick Reference Guide x1

Manual DVD x1

MP-4815 EPE Right x1

MP-4815 EPE Left x1

MP-4815

Quick

Reference

Guide

Designed for PA-6225

Unit: mm

Jumper Setting

Safety Precaution

MP-4815

The following messages are safety reminders on how to protect your system

from damages, and thus extend the life cycle of the system.

1. Check the Line Voltage

The operating voltage for the power supply should cover the range of

9V~36V DC; otherwise, the system may be damaged.

2. Environmental Conditions

Place your MP-4815 on a sturdy, level surface. Be sure to allow

enough room on each side to have easy access.

Avoid moving the system rapidly from a hot place to a cold place or

vice versa because condensation may come from inside of the system.

Place MP-4815 against strong vibrations, which may cause hard disk

failure.

3. Handling

Do not turn the system upside down. This may cause the hard drive to

malfunction.

Do not allow foreign objects to fall into this product.

If water or other liquid spills into this product, unplug the power cord

immediately.

4. Good Care

When the outside of the case is stained, remove the stain with neutral

washing agent with a dry cloth.

If dust has been accumulated on the outside, remove it by using a

vacuum cleaner specially made for computers.

CAUTION!

Danger of explosion if battery is incorrectly replaced. Replace only with the same or

equivalent type recommended by the manufacturer. Dispose of used batteries

accordingto the manufacturer’s instructions.

WARNING!

Some internal parts of the system may have high electrical voltage. Therefore we

strongly recommend qualified engineers open and disassemble the system.

CAUTION! Danger of explosion may occur if the battery is replaced incorrectly. Replace batteries only with the same or equivalent

type recommended by the manufacturer. Dispose the used batteries according to the manufacturer’s instructions.

15” 2nd Display

CN10

CN5

CN7

CN8

CN11

CN12

CN3

5H4

CN2

CN4

3.3V

PWM

LEVEL

CN1

CN9

DC1

351

Panel Type Setting

JP5

JP4

JP3

JP2

JP1

Backlight Adjustment

Mode Selection

Panel Power Supply

Selection

Ver. Q1

Packing Checklist

Specifications System View

MP-4815 MP-4815

MP-4815

REAR I/O

Front View

Quarter View

Side View

459.93

227.14

366.12

2nd Display

PA-6322

VGA

USB 2.0

Type-B

DC IN

2nd Display

Display 15-inch LCD panel

Resolution LVDS 1024x768 dots XGA (24-bit)

Brightness Typ. 300 cd/ m2

Backlight Lamp Life time: min. 50,000 hours

Touch Panel P-CAP touch (Bezel free) or Resistive Touch

Touch Control Board Only for 15-inch Resistive Touch Panel (USB Interface)

Speaker 3W+3W@4 ohm speaker

Power Supply DC12V/3.33A/ 40W Power Adapter, 90 ~240 Vac, 50/60Hz

Wall Mount VESA Mount 100x100 mm

Dimension (WxHxD) 367 x 300 x 38 mm

Weight MP-4815: 3.1 kg

Certificate CE

Rear I/O Ports

DC IN 1 x DC-IN port

USB 1 x USB 2.0 port, Type B (downstream)

VGA 1 x VGA port

Optional Integrated Moudule

Module Mounting Provides mounting holes on right side to fix other devices

Optional Integrated Devices

Camera Camera module (USB Interface)

Environment

Operating Temp. 0°C ~ 40°C (32°F ~ 104°F)

Storage Temp. -20°C ~ 60°C (-4°F ~ 140°F)

Humidity 10% ~ 90%

MP-4815

Quick

Reference

Guide

Designed for PA-6322

If you discover any item below are damaged or

lost, please contact your vendor immediately.

MP-4815 x1

This Quick Reference Guide x1

Manual DVD x1

MP-4815 EPE Right x1

MP-4815 EPE Left x1

MP-4815 2nd Display + PA-6322: 11 kg

Jumper Setting

Safety Precaution

MP-4815

The following messages are safety reminders on how to protect your system

from damages, and thus extend the life cycle of the system.

1. Check the Line Voltage

The operating voltage for the power supply should cover the range of

9V~36V DC; otherwise, the system may be damaged.

2. Environmental Conditions

Place your MP-4815 on a sturdy, level surface. Be sure to allow

enough room on each side to have easy access.

Avoid moving the system rapidly from a hot place to a cold place or

vice versa because condensation may come from inside of the system.

Place MP-4815 against strong vibrations, which may cause hard disk

failure.

3. Handling

Do not turn the system upside down. This may cause the hard drive

to malfunciton.

Do not allow foreign objects to fall into this product.

If water or other liquid spills into this product, unplug the power cord

immediately.

4. Good Care

When the outside of the case is stained, remove the stain with neutral

washing agent with a dry cloth.

If dust has been accumulated on the outside, remove it by using a

vacuum cleaner specially made for computers.

CAUTION!

Danger of explosion if battery is incorrectly replaced. Replace only with the same or

equivalent type recommended by the manufacturer. Dispose of used batteries

accordingto the manufacturer’s instructions.

WARNING!

Some internal parts of the system may have high electrical voltage. Therefore we

strongly recommend qualified engineers open and disassemble the system.

CAUTION! Danger of explosion may occur if the battery is replaced incorrectly. Replace batteries only with the same or equivalent

type recommended by the manufacturer. Dispose the used batteries according to the manufacturer’s instructions.

15” 2nd Display

CN10

CN5

CN7

CN8

CN11

CN12

CN3

5H4

CN2

CN4

3.3V

PWM

LEVEL

CN1

CN9

DC1

351

Panel Type Setting

JP5

JP4

JP3

JP2

JP1

Backlight Adjustment

Mode Selection

Panel Power Supply

Selection

Ver. Q1

Packing Checklist

Specifications System View

MP-4815 MP-4815

MP-4815

REAR I/O

Front View

Quarter View

463

Unit: mm

Side View

463

227.14

2nd Display

PA-6722

372.66

VGA

USB 2.0

Type-B

DC IN

2nd Display

Display 15-inch LCD panel

Resolution LVDS 1024x768 dots XGA (24-bit)

Brightness Typ. 300 cd/ m2

Backlight Lamp Life time: min. 50,000 hours

Touch Panel P-CAP touch (Bezel free) or Resistive Touch

Touch Control Board Only for 15-inch Resistive Touch Panel (USB Interface)

Speaker 3W+3W@4 ohm speaker

Power Supply DC12V/3.33A/ 40W Power Adapter, 90 ~240 Vac, 50/60Hz

Wall Mount VESA Mount 100x100 mm

Dimension (WxHxD) 367 x 300 x 38 mm

Weight MP-4815: 3.1 kg

Certificate CE

Rear I/O Ports

DC IN 1 x DC-IN port

USB 1 x USB 2.0 port, Type B (downstream)

VGA 1 x VGA port

Optional Integrated Moudule

Module Mounting Provides mounting holes on right side to fix other devices

Optional Integrated Devices

Camera Camera module (USB Interface)

Environment

Operating Temp. 0°C ~ 40°C (32°F ~ 104°F)

Storage Temp. -20°C ~ 60°C (-4°F ~ 140°F)

Humidity 10% ~ 90%

MP-4815

Quick

Reference

Guide

Designed for PA-6722

If you discover any item below are damaged or

lost, please contact your vendor immediately.

MP-4815 x1

This Quick Reference Guide x1

Manual DVD x1

MP-4815 EPE Right x1

MP-4815 EPE Left x1

MP-4815 2nd Display + PA-6722: 11 kg

Jumper Setting

Safety Precaution

MP-4815

The following messages are safety reminders on how to protect your system

from damages, and thus extend the life cycle of the system.

1. Check the Line Voltage

The operating voltage for the power supply should cover the range of

9V~36V DC; otherwise, the system may be damaged.

2. Environmental Conditions

Place your MP-4815 on a sturdy, level surface. Be sure to allow

enough room on each side to have easy access.

Avoid moving the system rapidly from a hot place to a cold place or

vice versa because condensation may come from inside of the system.

Place MP-4815 against strong vibrations, which may cause hard disk

failure.

3. Handling

Do not turn the system upside down. This may cause the hard drive

to malfunction.

Do not allow foreign objects to fall into this product.

If water or other liquid spills into this product, unplug the power cord

immediately.

4. Good Care

When the outside of the case is stained, remove the stain with neutral

washing agent with a dry cloth.

If dust has been accumulated on the outside, remove it by using a

vacuum cleaner specially made for computers.

CAUTION!

Danger of explosion if battery is incorrectly replaced. Replace only with the same or

equivalent type recommended by the manufacturer. Dispose of used batteries

accordingto the manufacturer’s instructions.

WARNING!

Some internal parts of the system may have high electrical voltage. Therefore we

strongly recommend qualified engineers open and disassemble the system.

CAUTION! Danger of explosion may occur if the battery is replaced incorrectly. Replace batteries only with the same or equivalent

type recommended by the manufacturer. Dispose the used batteries according to the manufacturer’s instructions.

15” 2nd Display

CN10

CN5

CN7

CN8

CN11

CN12

CN3

5H4

CN2

CN4

3.3V

PWM

LEVEL

CN1

CN9

DC1

351

Panel Type Setting

JP5

JP4

JP3

JP2

JP1

Backlight Adjustment

Mode Selection

Panel Power Supply

Selection

Ver. Q1

Packing Checklist

Specifications System View

MP-4815 MP-4815

MP-4815

REAR I/O

Front View

Quarter View

468.1

Unit: mm

Side View

376.9

227.14

2nd Display

PA-6980

468.1

VGA

USB 2.0

Type-B

DC IN

2nd Display

Display 15-inch LCD panel

Resolution LVDS 1024x768 dots XGA (24-bit)

Brightness Typ. 300 cd/ m2

Backlight Lamp Life time: min. 50,000 hours

Touch Panel P-CAP touch (Bezel free) or Resistive Touch

Touch Control Board Only for 15-inch Resistive Touch Panel (USB Interface)

Speaker 3W+3W@4 ohm speaker

Power Supply DC12V/3.33A/ 40W Power Adapter, 90 ~240 Vac, 50/60Hz

Wall Mount VESA Mount 100x100 mm

Dimension (WxHxD) 367 x 300 x 38 mm

Weight MP-4815: 3.1 kg

MP-4815 2nd Display + PA-6980: 13 kg

Certificate CE

Rear I/O Ports

DC IN 1 x DC-IN port

USB 1 x USB 2.0 port, Type B (downstream)

VGA 1 x VGA port

Optional Integrated Moudule

Module Mounting Provides mounting holes on right side to fix other devices

Optional Integrated Devices

Camera Camera module (USB Interface)

Environment

Operating Temp. 0°C ~ 40°C (32°F ~ 104°F)

Storage Temp. -20°C ~ 60°C (-4°F ~ 140°F)

Humidity 10% ~ 90%

If you discover any item below are damaged or

lost, please contact your vendor immediately.

MP-4815 x1

This Quick Reference Guide x1

Manual DVD x1

MP-4815 EPE Right x1

MP-4815 EPE Left x1

MP-4815

Quick

Reference

Guide

Designed for PA-6980

Jumper Setting

Safety Precaution

MP-4815

The following messages are safety reminders on how to protect your system

from damages, and thus extend the life cycle of the system.

1. Check the Line Voltage

The operating voltage for the power supply should cover the range of

9V~36V DC; otherwise, the system may be damaged.

2. Environmental Conditions

Place your MP-4815 on a sturdy, level surface. Be sure to allow

enough room on each side to have easy access.

Avoid moving the system rapidly from a hot place to a cold place or

vice versa because condensation may come from inside of the system.

Place MP-4815 against strong vibrations, which may cause hard disk

failure.

3. Handling

Do not turn the system upside down. This may cause the hard drive

to malfunction.

Do not allow foreign objects to fall into this product.

If water or other liquid spills into this product, unplug the power cord

immediately.

4. Good Care

When the outside of the case is stained, remove the stain with neutral

washing agent with a dry cloth.

If dust has been accumulated on the outside, remove it by using a

vacuum cleaner specially made for computers.

CAUTION!

Danger of explosion if battery is incorrectly replaced. Replace only with the same or

equivalent type recommended by the manufacturer. Dispose of used batteries

accordingto the manufacturer’s instructions.

WARNING!

Some internal parts of the system may have high electrical voltage. Therefore we

strongly recommend qualified engineers open and disassemble the system.

CAUTION! Danger of explosion may occur if the battery is replaced incorrectly. Replace batteries only with the same or equivalent

type recommended by the manufacturer. Dispose the used batteries according to the manufacturer’s instructions.

15” 2nd Display

CN10

CN5

CN7

CN8

CN11

CN12

CN3

5H4

CN2

CN4

3.3V

PWM

LEVEL

CN1

CN9

DC1

351

Panel Type Setting

JP5

JP4

JP3

JP2

JP1

Backlight Adjustment

Mode Selection

Panel Power Supply

Selection

Tabla de contenidos

Otros manuales de Terminal táctil de Protech Systems

Protech Systems

Protech Systems PA-3222 Manual de usuario

Protech Systems

Protech Systems MH-5102 Manual de usuario

Protech Systems

Protech Systems PPC-7915F Manual de usuario

Protech Systems

Protech Systems SP-S216 Manual de usuario

Protech Systems

Protech Systems PA-3522 Manual de usuario

Protech Systems

Protech Systems PA-6322 Manual de usuario

Protech Systems

Protech Systems PA-3570 Manual de usuario

Protech Systems

Protech Systems PS-8851A Manual de usuario

Protech Systems

Protech Systems PA-6322 Manual de usuario

Protech Systems

Protech Systems PA-3222 Manual de usuario

Protech Systems

Protech Systems POS-3520 Manual de usuario

Protech Systems

Protech Systems PA-6822 Manual de usuario

Protech Systems

Protech Systems PA-3122 Manual de usuario

Protech Systems

Protech Systems PA-3170 Manual de usuario

Protech Systems

Protech Systems PA-6222 Manual de usuario

Protech Systems

Protech Systems PS3100 Manual de usuario

Protech Systems

Protech Systems POS-6920 Manual de usuario

Protech Systems

Protech Systems PA-8225 Manual de usuario

Protech Systems

Protech Systems POS-6511 Manual de usuario

Protech Systems

Protech Systems BC-0230 Manual de usuario

Protech Systems

Protech Systems PA-6622 Manual de usuario

Protech Systems

Protech Systems PA-3211 Manual de usuario

Protech Systems

Protech Systems POS-6510-MIT Manual de usuario

Protech Systems

Protech Systems POS-3120 Manual de usuario

Manuales populares de Terminal táctil de otras marcas

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manual de usuario

Ingenico

Ingenico AXIUM EX4000 Manual de usuario

Heisei Electronics

Heisei Electronics Q-POS 815 Manual de usuario

Amano

Amano MTX-15 Manual de usuario

FLOWBIRD

FLOWBIRD CWT Compact Touch Manual de usuario

Demco

Demco SP7 Manual de usuario

Lathem

Lathem PC600 Series Manual de usuario

Partner

Partner MF-2352 Manual de usuario

NCR

NCR RealPOS 7460-2 Manual

Simrad

Simrad MS50 Instrucciones de montaje

Unitech

Unitech MR350 MKII Guía de inicio rápido

Jungheinrich

Jungheinrich WMT 210 Manual de usuario

Motorola

Motorola MTP850 Manual de usuario

YASKAWA

YASKAWA 62H-MDC0 Manual de usuario

MVG industries

MVG industries NeptuLink Manual de usuario

Price Industries Limited

Price Industries Limited FDC Manual de instrucciones

Honeywell

Honeywell TemaKey Manual de usuario

EBN

EBN BPC65-B-A16G Manual de usuario