WWW.TRAXON-ECUE.COM ©2023 traxon technologies. All rights reserved. Information for Use 04/23 Sheet: 03 / 12
1 Safety instructions
Please read the safety instructions, provided in a separate manual, carefully. Make sure that the
environmental, mounting, and installation prerequisites are met. This manual should be kept at a safe place
and in reach of the device.
1.1 Symbols
!
The exclamation mark warns about possible
damage of the device itself, to connected devices,
and to the user.
The information symbol gives general hints and
informs about handling and procedures for use of
the device.
1.2 General safety instructions
2 General device description
Designed to control small to medium projects, the Lighting Control Engine 3 mx (LCE3MX) is a high
performance server with two e:cue software applications installed. As a central control unit, this versatile
lighting control server orchestrates all devices and xtures within a project. With the ability to output e:net
and the capability to integrate various external engines, triggers, and other desired devices and content, the
— To prevent electric shock hazard or damage to the
equipment, disconnect the power cord to remove power
from the server. Portions of the power supply and some
internal circuit remain active until power is removed.
— Device components inside the system can reach high
temperatures. Do not open the system while in operation.
Repairs may only be carried out by authorized, specially
trained personnel. When in doubt, contact Traxon e:cue
service.
— To avoid short circuits, keep paper clips, screws, and
staples away from connectors, slots, sockets, and
circuitry.
— Avoid dust and humidity. Do not place the device in any
area where it may become wet.
— Installation and maintenance of this product must be
performed by qualied individuals who are knowledgeable
about the procedures, precautions, and hazards
associated with the product.
— To prevent the device from overheating, only operate it in
well-ventilated environment. Cooling ns may not be
obstructed. Do not install next to heat emitting sources or
in a place subject to direct sunlight.
— Seek professional assistance before using an adapter or
extension cord. These devices could interrupt the
grounding circuit.
— If safety instructions are missing, please contact Traxon
e:cue to receive a new copy.
Lighting Control Engine 3 mx — Information for Use | Safety instructions
content
