proSmart BBoil Manual de usuario
Manufacturer:
Pro Smart Ltd
78 Maestro Kanev Str.
1618 Sofia, Bulgaria
bboilrf.com/en
џThe product:
џBBoil is a Wi-Fi programmable
thermostat controller. The device is
an Internet connected relayed
module, that includes a weekly
schedule. The laer could be
programmed and controlled via an
Internet connected PC desktop
computer or a smartphone.
џBBoil allows the fast
automazaon of every electrical
device, regardless of its
manufacturer or model
џThe technology set in BBoil allows
it to connect with any wireless
Internet, without the need of any
addional sengs.
џBBoil is a complex system with
which you not only turn on and off
your devices remotely, but
manage and adjust a number of
devices in your home, office,
house or villa.
џBBoil allows the users to receive
real me informaon for all
connected devices — their work
and current status.
Why choose BBoil:
џSaves you money from your electricity bill
џOptimizes the use of every connected electrical device or appliance
џComplete integrated control system
џEasy to use and user friendly software interface
џFlexible work modes – thermostat and on/off
џWork with up to four wireless sensors
џWork with up to four wireless sensors for BBoil RF and four wired ones
for BBoil Classic.
BBoil could be used for:
џControl of electric water heaters
џControl of gas boilers and solid fuel boilers
џControl of solar systems
џControl of irrigation systems
џControl of indoors and outdoors lighting
џControl of various types of electric devices and appliances
We have two types of BBoil devices: BBoil Classic which has a wired
temperature sensor and BBoil RF with wireless temperature sensor.
Technical specification
Programme
Upper and lower hysteresis
(set by the user in the outlined ranges)
Central charging block
Central block – consumption
Central block – working frequency
Central block – size
Temperature sensor - voltage*
Temperature sensor – working frequency*
Temperature sensor – range*
Temperature sensor – size*
Working humidity
Weekly schedule work
Manually set temperature
Turned off
Max. 230V~; 16 А (4
A inductive load)
100-240V~ 50/60Hz 35mА Т45
Minimum of 100m of empty space
3V (2×1,5V type АА) alkaline batteries (LR6)
Protecon degree, provided by the sheath IP20 - at installaon posion
Ambient temperature during transportation from –20°С till +60°С
Air humidity during transportation from 5% till 90% without condense
Main unit fuse
Wireless temperature sensor’s fuse
FF1 T 250mA 250V 35A
F1 IH 0,30A IT 0,60A U 30V Imax 10A
0,1s max
Overvoltage category
II
SELV
Chain type
Wireless communication
Network topology
* It concerns the BBoil RF modification
Safety instructions
Please, read before using the device for the first time
The outlined safety procedures below are to be followed while using the current
product. Please, do follow all warnings in the device’s user manual.
General safety instructions
You are the only one responsible for the device’s usage, as well as for any caused
damages in consequence of that. The device’s usage is a subject of the set safety
measures for the customers and their environment. Please do not press the
device too hard. Always use it and its accessories gently and keep them in a clean
place, away from any dust. Do not expose them to open fire or in any proximity to
lighted tobacco products. Do not let the device and its accessories to fall down, do
not throw or fold them. Do not use any aggressive chemicals, detergents or
aerosols for their cleaning. Do not paint them and do not attempt to disassemble
the device or its accessories. That could be accomplished only by a qualified
professional. The device’s working temperature is from 0°С till +45°С and storing
temperature of –20°С till +60°С. For removing electric products’ waste, the
national and regional legislations are followed. The device is to be installed in
electric switchboards or in the device/s it will manage and is created to control
household devices and equipment.
Any unauthorised reconstruction and/or product modification is strictly
forbidden following the European safety and approval directives (CE). The device
works at supply voltage of 100-240V~/50/60 Hz. Services, settings and repairs
could be accomplished only by an authorised service provider. For its repair use
only the original spare parts. The usage of other spare parts could cause significant
damages or injuries. If you notice any damage, please stop using the device. The
device is intended for direct connection to TN / IT AC power supply 100-240V,
50/60Hz. Before cleaning the device, disconnect it from the power supply. Do not
use any liquids or aerosols.
The device’s installation is accomplished according ro the manufacturers’
instructions, the НD 60364-4-41 regulations and the national legislations.
Attention! Damaged power supply cables are a life treath as could lead to an
electric shock.
Do not use the device if there is a damaged cable, power supply cord or network
plug. In the case of power supply cable’s damage, please leave its repair to a
qualified professional!
Do not leave children with the device without supervision!
Do not let children play with the device. They cannot properly assess the danger of
using electric devices. The device is not intended for use by individuals (including
children) with limited physical, sensory or mental capabilities or without any
experience and/or knowledge unless they are controlled by an individual
responsible for their safety or have received instructions on how to use it. Use, set
and keep the product only in places away from children. Do not leave the packing
materials spread aimlessly. They could be a dangerous toy for your children. Your
new device contains many small components with sharp edges that could cause
injuries and upon disassemble - a swallowing or suffocation risk.
Electric safety
This device could be used only when powered by the specific supply unit. Every
other way could be dangerous and terminates the validity of any issued device’s
certificate. Use the correct external power supply. The device should be powered
only by the specific power supply as indicated on the nominal electric power
supply’s nameplate. If unsure of the power supply’s type, please turn to the
authorised service provider or to the local electric services company. Please, be
extremely careful. Store and use the device in a place far from water or other
liquids as those could cause a short circuit.
Otros manuales para BBoil
1
Tabla de contenidos
Otros manuales de Termostato de proSmart
Manuales populares de Termostato de otras marcas
EWELLY
EWELLY EW-181 Manual de usuario
Prolon
Prolon T1100 Instrucciones de instalación
Computherm
Computherm Q20 Manual de usuario
Heatmiser
Heatmiser neoStat Manual de usuario
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario
