ProScan PS36700YX1CJ5 Manual de usuario

USER'S MANUAL

_ i! ¸

IMPORTANT IN FORMATION

[

WARNING

To reduce the risk of fire or shock

hazard, do not expose this TV to

rain or moisture.

I To reduce the risk of electric shock, do not remove

HOCK DO NOT OPE[x servicing to qualified service personnel.

RISKOF ELECTRIC cover (or back). No user serviceable parts inside. Refer

_K This symbol indicates This symbol indicates

"dangerous voltage" inside the important instructions

product that presents a risk of accompanying the product.

electric shock or personal injury.

Caution: To reduce the risk of electric shock, match wide

blade of plug to wide slot, fully insert.

Attention: Pour _viter {eschocs _{ectriques, introduire la lame

la plus large de {a fiche dans [a borne correspondante de {a

prise et pousser jusqt_ au fond.

Refer to the identification/rating label located on the back

panel of your product for its proper operating voltage.

FCC Regulations state that unauthorized changes or modifications to this

equipment may void the user's authority to operate it.

If fixed (non-moving) images are left on the screen for long periods, they may

be permanently imprinted on the screen. Such images include network Iogos,

phone numbers, and video games. This damage is not covered by your

warranty. Extended viewing of channels displaying these images should be

avoided.

Cable TV Installer: This reminder is provided to call your attention to Article

820-40 of the National Electrical Code (Section 54 of the Canadian Electrical

Code, Part 1) which provides guidelines for proper grounding and, in particular,

specifies that the cable ground shall be connected to the grounding system of the

building asclose to the point of cable entry as practical.

The GUIDE Plus+ Gold system is manufactured under license from Index |

Systems Inc. )

TABLE OF CONTENTS

SETUP AND CONNECTIONS ............................................ 3

Step 1: Unpack the TV ..................................................... 4

Step 2: Connecting your TV ............................................. 4

TV Only ..................................................................... 4

The Basic Connection ................................................ 5

Advanced Connections .............................................. 6

Step 3:Connecting the IR Controller ................................. 9

Attaching the IR Controllers ........................................ 9

Step 4: Plug in the TV .................................................... 10

Step 5: Place batteries in remote .................................... 10

Step 6: Turn on the TV ................................................... 10

On-Screen Program Guide ....................................... 10

Step 7: Program the TV .................................................. 10

INTERACTIVE SETUP .......................................................... 11

Using Point and Select ................................................... 12

Entering Setup ................................................................ 12

Select a Language .......................................................... 13

Auto Channel Search ..................................................... 13

GUIDE Plus+ System ..................................................... 14

Set the Time ................................................................... 14

Set the VCR1 Channel (auto tuning) ............................... 15

Set the VCR2 Channel (auto tuning) ............................... 15

Set the DVD Channel (auto tuning) ................................ 16

Set the SAT/CABLE Channel (auto tuning) ...................... 17

Label the Channels ........................................................ 18

What Now? ................................................................... 18

Program the Remote ................................................. 18

USING THE REMOTE .......................................................... 19

Remote Buttons ............................................................. 20

Using the WHOolNPUT button ............................... 21

Programming the Remote .............................................. 22

Testing the remote .................................................... 22

Programming the remote .......................................... 22

Using the remote to control a device ........................ 23

Modes of Operation ................................................. 23

Front Panel .................................................................... 23

TABLE OF CONTENTS

FEATURES AND MENUS .................................................... 25

Menus and Control Panels ............................................. 26

Menus ...................................................................... 26

Control Panels .......................................................... 27

Audio Menu .................................................................. 28

Using the remote to select an audio processor ............... 29

Picture Quality Menu .................................................... 30

Screen Menu ................................................................. 31

Using Closed Captioning .......................................... 32

Channel Menu ............................................................... 33

Time Menu .................................................................... 34

Parental Controls Menu ................................................. 35

GUIDE Plus+ Menu ....................................................... 36

Setup Menu ................................................................... 36

PIP (Picture-in-Picture) Operation .................................. 37

Channel Marker ............................................................. 38

TROUBLESHOOTING ........................................................ 39

CARE AND CLEANING ..................................................... 40

PROSCAN TV LIMITED WARRANTY ........................... 41

ACCESSORIES ........................................................................ 42

INDEX .......................................................................................45

SETUP AND CO

GEl FJNGS1AKIED

This manual is designed to uick]y;

The first _oursections of the Lhow

to get your TV Setup and

Inte Rein and use al_

the Features and of '%

The Reference sect_c_n the bac boo{(

contains troubleshootin_ips, care ; 6eani%

instrucbons, accessory ordenl your

warranty _

V'Jell,,, if yourTV's out

4 FE NUS

Check out the notes that have been

added throughout the manual in these

Tip Boxes. There are some important

tips that will help you get the most from

your T'v:

SETUP AN D CONN ECTIONS

STEPI: UNPACK THETV

Make sure to locate the remote control and your GUIDE Plus+ Booklet.

STEP2: CONNECTING YouRTV

There are three types of connections outlined in this section:

TV Only: If you're only going to connect the

TV to your home antenna or cable

system,

The Basic Connection: If you're going to connect the TV to a

VCR or satellite receiver.

Advanced Connections: If you're going to make multiple

connections, hooking up timeTV to

one or two VCRs, DVD player, and a

satellite receiver.

Cable information and illustrations are given for each type of

connection. Once you have completed your desired connection you

may skip forward to Step 3.

TV ONLY

This is a basic connection from an antenna or cable system to your TV.

Connect timecable into timeCable/Antenna jack as shown.

CABLES

You will usethe following cable to make your connection:

Coaxial Cable: These cables carry audio and video

signal to the TV from an antenna, cable, or

cablebox.

Important Stand Information

Direct View TVs: 13" - 36" diagonal

CAUTION: Choose the location for your

TV carefully. Take precautions that the

stand or other furniture the TV is placed

on is properly located (seeImportant

Safeguardssheet) and of adequate size

and strength to prevent the TV from

accidentally being tipped over, pushed

off, or pulled off. This could cause

damage to the TV and/or personal injury.

Before You Connect

Protect against power surges:

,, Connect all components before

plugging any power cords into the wall

outlet.

" Turn off the TV and/or component

before connecting or disconnecting

any cab}es.

*Make sure all antennas and cab}es are

properly grounded. Refer to your Safety

Tips sheet packed with your TV.

CABLE, CABLE BOX_ OR ANTENNA

Once you have completed this connection you may skip to Step 3. our TV May Differ 1

odel PS27600 does not have an

S-Video jack for INPUT2 nor e×ternal

speaker terminals.

SETUP AN D CONN ECTIONS

THE BASIC CONNECTION

The basic connection below (TV and VCR) istimemost common

commection and is therefore used to illustrate a single component

commection with your TV. For better sound and picture quality and

multiple component commection information refer to the _ext section,

Advanced Connections.

CABLES

You will usethe following cabJe to make your connection:

Coaxial Cables: These cables carry both the audio

and video signa[ to the TV from an antellna, cable,

or cabJebox. In this connection, a second Coaxial

Cable carries the signal through the VCR to the TV.

CABLE,CABLE BOX, ORANTENNA

How ToV_EwTHEVCR

Towatch the VCR in this com_ection tune TV to

Channel 3 or 4.

Later, in the Interactive Setup section you will

program timeTV to automatically tune to Channel 3

or 4 when you turn on the VCR.

Once you have completed this connection you may skip to Step 3,

"Com_ecting the IR Controller/'

our TV May Differ 1

odel PS27600 does not have aim

S-Video jack for INPUT2 nor external

speaker terminals.

SETUP AN D CONN ECTIONS

ADVANCED CONNECTIONS

Advanced connections give you better sound and video by separating

the audio and video signals and enable you to connect rnultipie

components.

This section describes the types of inputs available on timeback of your

TV and suggests ways you can use them for optimum performance.

BACK OF THETV

The diagram below describes each of the back panel jacks. When

connecting AN cables, be sure to connect corresponding OUTPL;TS

and INPUTS (Video to V_deo, Right Audio to Right Audio, etc.).

Once you have made your connections

you will need to program the TV to tune

to the correct Video INPUT channel in

order to see and hear audio and video

from timecomponent. You will program

this later in the Interactive Setup.

Input 1

Connect any of the following components:

* VCR * Intemet Access Device

* Laserdisc Player * DVD Player

* Satellite Receiver

To view timecomponent connected to Input 1:

Use timeWHO*INPUT button on the remote,

Input 2

Connect any of timefollowing components:

* VCR . Internet Access Device

* Laserdisc Player . DVD Player

* Satellite Receiver

To view the component connected to Input 2:

L;se timeWHO*INPL;T button on timeremote.

S-Video

@ @ @

Speaker Terminals*

L/se to connect external

speakers for surround sound.

Make sum the Speaker

Selection is set to

S-Video*

Fhis optional connection car

be used for better vide{)

quality picture.

Audio Outputs

audio receiver or

amplifier for variable controlled

or fixed level stereo output,

Cable/Antenna

signal input from a cable,

cable box, or an off-air antenna, Can

also be used for basic component

connections.

VCR Control

Connect Guide Plus+

controller for one-button

recording and channel

tuning from the Guide.

*Model P527600 does not have these features.

SETUP AN D CONN ECTIONS

SAMPLE CONNECTIONS

The following are sample com_ection scenarios which you may

encounter when commectingcomponents to your TV. Note: those

components which offer armS-Video commection, such as DVD, VCR or

Satellite Receivers, must match their S-Video commection with their

audio INPUT commection.

CABLES

You will usethe following cable to make your commection:

Coaxial Cables: Carries the signal from the

antemla or cable directly to the television or

through a cabiebox, as needed by your cable

system.

Audio/Video Cables: Carries sound and video

from the component to timeTV.

S-Video Cable: Carries video from an S-Video

capable component which provides best

picture quality.

TV AND STEREoVCR

CABLE, CABLE BOX, OR ANTENNA

Cautions:

Position cables to Avoid Audio Hum or

Interference

• Insert all cables firmly into jacks.

•Place the audio/video cables to the

sides of the TWs back pane[ instead of

straight down timemiddle.

•Try not to coil any twimlead cables

and keep them away from the audio/

video cables.

Protect your componentsfrom

Overheating

•Do not block ventilation holes in any

of timecomponents. Arrange time

components so that air can circulate

freely.

• Do not stack components.

• Allow adequate ventilation when

placing your components in a stand.

• Place aimamplifier on the top shelf of

the stand so heated air rising from it

wii[ not flow around other

components,

VCR

VI_EO __8A_U_OL N FROMoAf_ ¢H4_¢H3_ _

FUT 2 _

Compared to the Basic Commection, using audio, video and

S-Video (if available) cables will enhance the sound and picture quality

from a component.

How ToVIEwYouRVCR

Towatch timeVCR in this com_ection, press TV to put time

remote control into TV mode, then press WHO*INPUT to

scroll through timevideo input channels until you tune to

VID1 input.

In timeInteractive Setup section you can program the TV

to automatically tune to timeVlD I input chamme[when

you turn on timeVCR.

rMost AudioiXfideo cables are combined

into one cable with three heads on each

end.

We show individual v,d_)vid_ _1_)

cables in these

samp[e _ Ri_lhtg_]di°(red}

commections. Either

may be used, but _}

you must be sure to

commectV_deo to Video, Right to Right

and Left to Left.

SETUP AN D CONN ECTIONS

TVNCR ANDSATELLITERECEIVER

CABLE, CABLE BOX, OR ANTENNA

How ToVIEwYouR COMPONENTS

Towatch the SateJJiteReceiver in this connection,

press TV to put the remote control into TV mode, then

press WHO*INPUT to scroll through the video input

channels until you tune to VID1 {or SVID I) input.

Towatch timeVCR in this connection, press TV to put

the remote control into TV mode, then press

WHO*INPUT to scroll through the video input

channels until you tune to VID2 {or SVID 2) input.

In timeInleractive Setup you can program the TV to

automatically tune to correct input channel when you

turn on your component.

TV_VC P_ SATELLITE RECEIVERAND DVD

CABLE, CABLE BOX, OR AN1 ENNA SATELLITE SIGNAL

VCR

How ToVIEwYouR COMPONENTS

To watch timeSatellite Receiver in this connection, press

TV to put the remote control into TV mode, then press

WHO*INPL;T to scroll through the video input

channels until you tune to VlD1 {or SVID 1) input.

To watch fire VCR in this connection tune to Channel 3

or 4.

To watch timeDVD player in this connection, press TV

to put the remote control into TV mode, then press

WHO*INPL;T to scroll through timevideo input

channels until you tune to VID2 {or SVID 2) input.

In timeInteraclive Setup you can program timeTV to

automatically tune to the correct input channel when

you turn on your component.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de TELEVISOR de ProScan

ProScan

ProScan PLED2963A Manual de usuario

ProScan

ProScan PLED 2243B Manual de usuario

ProScan

ProScan PLDED3273A-E Manual de usuario

ProScan

ProScan PS32130 Manual de usuario

ProScan

ProScan PS36605YX4CK2 Manual de usuario

ProScan

ProScan PS32510YX1CM2 Manual de usuario

ProScan

ProScan PS35682 Manual de usuario

ProScan

ProScan PS3109YX1CH2 Manual de usuario

ProScan

ProScan PLED4274A-B Manual de usuario

ProScan

ProScan PLED3792A Manual de usuario

ProScan

ProScan PS27125 Manual de usuario

ProScan

ProScan PLED4897A Manual de usuario

ProScan

ProScan PS50710 Manual de usuario

ProScan

ProScan PLEDV2031A Manual de usuario

ProScan

ProScan 37LC30S60 Manual de usuario

ProScan

ProScan PLDED3280A-B Manual de usuario

ProScan

ProScan PS27115FE1BC Manual de usuario

ProScan

ProScan PS27152FX1 Manual de usuario

ProScan

ProScan PLEDV1520A-B Manual de usuario

ProScan

ProScan PLDED5069 Manual de usuario

ProScan

ProScan PLED3204A Manual de usuario

ProScan

ProScan PS61670 Manual de usuario

ProScan

ProScan PLDED3257A-B Manual de usuario

ProScan

ProScan EP6585 Manual de usuario

Manuales populares de TELEVISOR de otras marcas

Philips

Philips Colour Television Manual de usuario

Toshiba

Toshiba 27A10 Manual de usuario

Philips

Philips 42PF9630A/37 Manual de usuario

Hitachi

Hitachi 32FX48B Manual de usuario

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Manual de usuario

Changhong Electric

Changhong Electric uhd55b6000is Manual de usuario

Philips

Philips Matchline 21CE7551 Manual de usuario

Panasonic

Panasonic Genus TX-G10 Manual de usuario

Toshiba

Toshiba 19A20 Manual de usuario

Philips

Philips 25PT4523-16 Manual de usuario

Sony

Sony XBR-100Z9D Manual de usuario

Philips

Philips PR0930X3 Manual de usuario

Philips

Philips Brilliance 231P4QPY Manual de usuario

Samsung

Samsung 55S9 B Series Manual de usuario

Philips

Philips 32HF9385D Guía de solución de problemas

Sharp

Sharp LC-40FI5012E Manual de usuario

Loewe

Loewe Table Stand Reference 55 Manual de usuario

Philips

Philips 32PFH5300 Manual de usuario